과제정보
본 논문은 과학기술정보통신부의 재원으로 한국연구재단의 지원을 받아 수행되었습니다(NRF-2017R1A5A101531114).
참고문헌
- Plain, K.P., and Tong, L., "The Effect of Stitch Incline Angle on Mode I Fracture Toughness - Experimental and Modelling," Composite Structures, Vol. 92, No. 7, 2010, pp. 1620-1630. https://doi.org/10.1016/j.compstruct.2009.11.027
- Aymerich, F., "Effect of Stitching on the Static and Fatigue Performance of Co-cured Composite Single-lap Joints," Journal Composite Materials, Vol. 38, No. 3, 2004, pp. 243-257. https://doi.org/10.1177/0021998304039271
- Beylergil, B., Cunedioglu, Y., and Aktas, A., "Experimental and Numerical Analysis of Single Lap Composite Joints with Interadherend Fibers," Composites: Part B, Vol. 42, No. 7, 2011, pp. 1885-1896. https://doi.org/10.1016/j.compositesb.2011.06.010
- Mouritz, A.P., and Cox, B.N., "A Mechanistic Approach to the Properties of Stitched Laminates," Composites Part A: Applied Science and Manufacturing, Vol. 31, No. 1, 2000, pp. 1-27. https://doi.org/10.1016/S1359-835X(99)00056-1
- Ji, H., Kweon, J.H., and Choi, J.H., "Fatigue Characteristics of Stainless Steel Pin-reinforced Composite Hat Joints", Composite Structures, Vol. 108, 2014, pp. 49-56. https://doi.org/10.1016/j.compstruct.2013.08.040
- Chang, P., Mouritz, A.P., and Cox, B.N., "Properties and Failure Mechanisms of Pinned Composite Lap Joints in Monotonic and Cyclic Tension," Composites Science and Technology, Vol. 66, No. 13, 2006, pp. 2163-2176. https://doi.org/10.1016/j.compscitech.2005.11.039
- Steeves, C.A., and Fleck, N.A., "In-plane Properties of Composite Laminates with Through-thickness Pin Reinforcement," International Journal of Solids and Structures, Vol. 43, No. 10, 2006, pp. 3197-3212. https://doi.org/10.1016/j.ijsolstr.2005.05.017
- Song, S.-H., Back, J.-T., An, W.-J., and Choi, J.-H., "Static Strength of Composite Single-lap Joints Using I-fiber Stitching Process with different Stitching Pattern and Angle," Composites Research, Vol. 33, No. 5, 2020, pp. 296-301.
- Kim, C.H., Jo, D.H., and Choi, J.H., "Failure Strength of Composite T-joints Prepared Using Anew 1-thread Stitching Process," Composite Structures, Vol. 178, 2017, pp. 225-231. https://doi.org/10.1016/j.compstruct.2017.07.003
- An, W.-J., Kim, C.-H., Choi, J.-H., and Kweon, J.-H., "Static Strength of RTM Composite Joint with I-fiber Stitching Process," Composite Structures, Vol. 210, 2019, pp. 348-353. https://doi.org/10.1016/j.compstruct.2018.11.072
- Kim, C.H., Sim, H.-W., An, W.-J., Kweon, J.-H., and Choi, J.-H., "Impact Characteristics of Composite Panel Stitched by I-fiber Process," Composites Part A, Vol. 127, 2019, 105644. https://doi.org/10.1016/j.compositesa.2019.105644
- Kang, M.H., Choi, J.H., and Kweon, J.H., "Fatigue Life Evaluation and Crack Detection of the Adhesive Joint with Carbon Nanotubes," Composite Structures, Vol. 108, 2014, pp. 417-422. https://doi.org/10.1016/j.compstruct.2013.09.046
- Baek, S.J., Kim, M.S., An, W.J., and Choi, J.H., "Defect Detection of Composite Adhesive Joints Using Electrical Resistance Method", Composite Structures, Vol. 220, 2019, pp. 179-184. https://doi.org/10.1016/j.compstruct.2019.03.081
- Kim, C.H., Choi, J.H., and Kweon, J.H., "Composite Fracture Detection Capabilities of FBG Sensor and AE Sensor," Composites Research, Vol. 27, No. 4, 2014, pp. 152-157. https://doi.org/10.7234/COMPOSRES.2014.27.4.152