DOI QR코드

DOI QR Code

Seismic stability analysis for a two-stage slope

  • Rao, Pingping (Department of Civil Engineering, University of Shanghai for Science and Technology) ;
  • Wu, Jian (Department of Civil Engineering, University of Shanghai for Science and Technology) ;
  • Jiang, Ganyou (Guangxi Luqiao Engineering Group Co., Ltd.) ;
  • Shi, Yunwei (School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiaotong University) ;
  • Chen, Qingsheng (Hubei Provincial Ecological Road Engineering Technology Research Center, Hubei University of Technology) ;
  • Nimbalkar, Sanjay (School of Civil and Environmental Engineering, University of Technology Sydney)
  • Received : 2019.04.01
  • Accepted : 2021.10.07
  • Published : 2021.10.25

Abstract

This paper adopts the kinematic theorem of limit analysis to assess the seismic stability of a two-stage slope. The seismic effect is taken into account by using the pseudo-static approach. The failure mechanism for the slope is extended to include below-toe failure, toe failure and face failure. Validation of this approach is conducted by comparing the factor of safety with the data in the existing literatures. The stability charts are presented based on the graphical method for reading the factor of safety readily. Parametric study involving the effect of slope geometry, internal friction angle, seismic effect as well as depth coefficient on the stability of a two-stage slope is carried out. The critical failure surfaces with various parameters are plotted. The results obtained reveal the significant influence of slope geometry on the failure mechanism of a two-stage slope under static and seismic condition.

Keywords

Acknowledgement

This work is supported by the National Natural Science Foundation of China (Project No.: 42077435). The authors wish to express their gratitude for the above financial support.

References

  1. Aksoy C.O., Uyar, G.G. and Ozcelik, Y. (2016), "Comparison of Hoek-Brown and Mohr-Coulomb failure criterion for deep open coal mine slope stability", Struct. Eng. Mech., 60(5), 809-828. https://doi.org/10.12989/sem.2016.60.5.809.
  2. Babanouri, N. and Sarfarazi, V. (2018), "Numerical analysis of a complex slope instability: pseudo-wedge failures", Geomech. Eng., 15(1), 669-676. http://doi.org/10.12989/gae.2018.15.1.669.
  3. Chen, W.F. (1975), Limit Analysis and Soil Plasticity, Elsevier Scientific Publishing Company, New York, U.S.A.
  4. Cai, F. and Ugai, K. (2000), "Numerical analysis of the stability of a slope reinforced with piles", Soils Found., 40(1), 73-84. https://doi.org/10.3208/sandf.40.73.
  5. Deng, D.P., Li, L. and Zhao, L.H. (2017), "Limit-equilibrium method for reinforced slope stability and optimum design of antislide micropile parameters", Int. J. Geomech., 17(2), 06016019. http://doi.org/10.1061/(ASCE)GM.1943-5622.0000722.
  6. Gazetas G., Garini E., Anastasopoulos I. and Georgarakos T. (2009), "Effects of near-fault ground shaking on sliding systems", J. Geotech. Geoenviron. Eng., 135(12), 1906-1921. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000174.
  7. Gao L. S., Zhao L.H., Tang G.P. and Luo W. (2013), "Upper bound limit analysis of stability on inhomogeneity and anisotropy two-stage slope", Electron. J. Geotech. Eng., 18, 3581-3604.
  8. Gong, W.B., Li, J.P. and Li, L. (2018), "Limit analysis on seismic stability of anisotropic and nonhomogeneous slopes with anti-slide piles", Sci. China Technol. Sc., 61(1), 140-146. https://doi.org/10.1007/s11431-017-9147-8.
  9. Kim, Y.M. and Jeong, S.S. (2017), "Modelling of shallow landslides in an unsaturated soil slope using a coupled model", Geomech. Eng., 13(2), 353-370. https://doi.org/10.12989/gae.2017.13.2.353.
  10. Lam, L. and Fredlund, D.G. (1993), "A general limit equilibrium model for three-dimensional slope stability analysis", Can. Geotech. J., 30(6), 905-919. https://doi.org/10.1139/t93-089.
  11. Li, X.P., He, S.M. and Wu, Y. (2010), "Seismic displacement of slopes reinforced with piles", J. Geotech. Geoenviron., 136(6), 880-884. https://doi.org/10.1061/(asce)gt.1943-5606.0000296.
  12. Michalowski, R.L. (2017), "Stability of intact slopes with tensile strength cut-off", Geotechnique, 67(8), 720-727. https://doi.org/10.1680/jgeot.16.P.037.
  13. Motlagh, A.T., Ghanbari, A., Maedeh, P.A. and Wu, W. (2018), "A new analytical approach to estimate the seismic tensile force of geosynthetic reinforcement respect to the uniform surcharge of slopes", Earthq. Struct., 15(6), 687-699. https://doi.org/10.12989/eas.2018.15.6.687
  14. Qin, C.B. and Chian, S.C. (2017), "Kinematic stability of a two-stage slope in layered soils", Int. J. Geomech., 17(9), 06017006. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000928.
  15. Qin, C.B. and Chian, S.C. (2018), "New perspective on seismic slope stability analysis", Int. J. Geomech., 18(7), 06018013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001170.
  16. Shukla, S.K., Khandelwal, S., Verma, V.N. and Sivakugan, N. (2009), "Effect of surcharge on the stability of anchored rock slope with water filled tension crack under seismic loading condition", Geotech. Geol. Eng., 27(4), 529-538. https://doi.org/10.1007/s10706-009-9254-3.
  17. Shen, H. and Abbas, S.M. (2013), "Rock slope reliability analysis based on distinct element method and random set theory", Int. J. Rock Mech. Min. Sci., 61(10), 15-22. https://doi.org/ https://doi.org/10.1016/j.ijrmms.2013.02.003
  18. Tran, T.P., Kim, A.R. and Cho, G.C. (2019), "Numerical modeling on the stability of slope with foundation during rainfall", Geomech. Eng., 17(1), 109-118. https://doi.org/10.12989/gae.2019.17.1.109.
  19. Utili S. (2013), "Investigation by limit analysis on the stability of slopes with cracks", Geotechnique, 63(2), 140-154. https://doi.org/10.1680/geot.11.p.068.
  20. Xu, J.S., Li, Y.X. and Yang, X.L. (2018), "Stability charts and reinforcement with piles in 3D nonhomogeneous and anisotropic soil slope", Geomech. Eng., 14(1), 71-81. https://doi.org/10.12989/gae.2018.14.1.071.
  21. Yang, M., Su, H.Z. and Wen, Z.P. (2017), "An approach of evaluation and mechanism study on the high and steep rock slope in water conservancy project", Comput. Concrete, 19(5), 527-535. https://doi.org/10.12989/cac.2017.19.5.527.
  22. Yang, X.L. and Li, Z.W. (2018), "Factor of safety of three-dimensional stepped slopes", Int. J. Geomech., 18(6), 04018036. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001154.
  23. Zhao, L.H., Cheng, X., Zhang, Y.B., Li, L. and Li, D.J. (2016), "Stability analysis of seismic slopes with cracks", Comput. Geotech., 77, 77-90. https://doi.org/10.1016/j.compg eo.2016.04.007.