DOI QR코드

DOI QR Code

스퍼터링 공법으로 제작한 ITO 박막의 디지털 홀로그래피를 이용한 단차에 대한 측정

Measurement of Step Difference using Digital Holography of ITO Thin Film Fabricated by Sputtering Method

  • 정현일 (조선대학교 일반대학원 기계시스템미래자동차공학과) ;
  • 신주엽 ((주)하백) ;
  • 박종현 (조선대학교 일반대학원 기계시스템미래자동차공학과) ;
  • 정현철 (조선대학교 산학협력단 공동장비운영센터) ;
  • 김경석 (조선대학교 공과대학 기계공학과)
  • Jung, Hyun Il (Dept. of Mechanical System & Automotive Engineering, Graduate School, Chosun UNIV.) ;
  • Shin, Ju Yeop (Habaek Co.,Ltd.) ;
  • Park, Jong Hyun (Dept. of Mechanical System & Automotive Engineering, Graduate School, Chosun UNIV.) ;
  • Jung, Hyunchul (Center for Scientfic Instruments, Industry Academic Cooperation foundation, Chosun UNIV.) ;
  • Kim, Kyeong-suk (Dept. of Mechanical Engineering, Chosun UNIV.)
  • 투고 : 2021.06.17
  • 심사 : 2021.07.18
  • 발행 : 2021.09.30

초록

Indium tin oxide (ITO) transparent electrodes, which are used to manufacture organic light-emitting diodes, are used in light-emitting surface electrodes of display EL panels such as cell phones and TVs, liquid crystal panels, transparent switches, and plane heating elements. ITO is a major component that consists of indium and tin and is advantageous in terms of obtaining sheet resistance and light transmittance in a thin film. However, the optical performance of devices decreases with an increase in its thickness. A digital holography system was constructed and measured for the step measurement of the ITO thin film, and the reliability of the technique was verified by comparing the FE-SEM measurement results. The error rate of the step difference measurement was within ±5%. This result demonstrated that this technique is useful for applications in advanced MEMS and NEMS industrial fields.

키워드

과제정보

이 논문은 2019년도 조선대학교 학술연구비 지원에 의하여 연구되었음.

참고문헌

  1. Mentley, D. E., "State of flat-panel display technology and future trends," Proceeding of the IEEE, Vol. 90, No. 4, pp. 453-459, 2002. https://doi.org/10.1109/JPROC.2002.1002520
  2. Castellano, J. A. and et al., "Handbook of display technology," Elsevier, Amsterdam, Netherlands, pp. 4-5, 2012.
  3. Kim, G. H., Lee, S. H., Yoon, J. H., and Kim, D. H., "ITO transparent electrode material technology trends," Information Display, Vol. 11, No, 5, pp. 17-22, 2010. https://doi.org/10.1080/15980316.2010.9652112
  4. Kim, K. S., Jung, H. I., Shin, J. Y., Yi, S. H., Kwon, I. H., and Jung, H. C., "Measurement of Line Width for Honeycomb Structured Circuit Using Reflective Digital Holography," Journal of the Korean Society for Nondestructive Testing, Vol. 37, No 3, pp. 158-159, 2017. https://doi.org/10.7779/jksnt.2017.37.3.158
  5. Cuche, E., Marquet, P., and Depeursinge, C., "Spatial filtering for zero-order and twin-image elimination in digital off-axis holography," Applied Optics, Vol. 39, No. 23, pp. 4070-4075, 2000. https://doi.org/10.1364/AO.39.004070
  6. Kim, K. S., "Principle of Digital Holography," in Technical Lecture, Journal of the Korean Society for Nondestructive Testing, Vol 33. No 5, pp. 472-478, 2013.
  7. Schnars, U. and Jueptner, W., "Digital Holography," Springer, Berlin, Germany, pp. 21-98, 1965.
  8. Jung, H. C., Shin, J. Y., and Kim K. S., "Deposition Step-height Measurement for ITO Thin Film Pattern Fabricated with Photo-lithography," Journal of the Korean Society for Nondestructive Testing, Vol 40. No 1, pp. 9-15, 2020. https://doi.org/10.7779/jksnt.2020.40.1.9