과제정보
This work was supported by the Program for Basic Scientific Research at the State Academies of Sciences for 2013-2020 (Project No. 23.2.1).
참고문헌
- Quality and Reliability Aspects in Nuclear Power Reactor Fuel Engineering, International Atomic Energy Agency, Vienna, 2015.
- F.G. Reshetnikov, Design, production and operation of fuel rods of power reactors, in: Two Volumes, vol. 2, Energoatomizdat, Moscow, 1995 (in Russian).
- A.V. Dobromyslov, N.I. Taluts, The Structure of Zirconium and its Alloys, Publishing House of the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, 1997 (in Russian).
- Thermophysical Properties Database of Materials for Light Water Reactors and Heavy Water Reactors, International Atomic Energy Agency, Vienna, 2006.
- S. Banerjee, P. Mukhopadhyay, Phase Transformations. Volume 12. Examples from Titanium and Zirconium Alloys, Elsevier Science, 2007.
- S.A. Nikulin, Zirconium Alloys for Nuclear Power Reactors, MISiS, Moscow, 2007 (in Russian).
- A.V. Nikulina, A.G. Malgin, Impurities and their effect on the structure and properties of zirconium parts in nuclear reactors, Atom. Energy 105 (2008) 328-339, https://doi.org/10.1007/s10512-009-9104-7, 5.
- Z. Duan, H. Yang, Y. Satoh, K. Murakami, S. Kano, Z. Zhao, J. Shen, H. Abe, Current status of materials development of nuclear fuel cladding tubes for light water reactors, Nucl. Eng. Des. 316 (2017) 131-150, https://doi.org/10.1016/j.nucengdes.2017.02.031.
- AWS G2.5, Guide for the Fusion Welding of Zirconium and Zirconium Alloys, 2012.
- AWS A5.24, Specification for zirconium and zirconium-alloy welding electrodes and rods, 2014.
- Russian Technical Specification OST 95 503-2006 Welded and brazed joints of parts of nuclear reactor cores. General technical requirements. Acceptance rules and quality control methods (in Russian).
- ASTM B 614-05 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces.
- ASTM G2/G2M-19 Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360℃) or in Steam at 750°F (400℃).
- ISO 10270:1995 Corrosion of Metals and Alloys e Aqueous Corrosion Testing of Zirconium Alloys for Use in Nuclear Power Reactors.
- Review of Fuel Failures in Water Cooled Reactors, International Atomic Energy Agency, Vienna, 2010.
- https://www.world-nuclear.org/.
- K. Komuro, Welding of zirconium alloys, Weld. Int. 8 (1994) 141-148, https://doi.org/10.1080/09507119409548564, 2.
- V.E. Blashchuk, Zirconium: alloys, welding, application (review), Automat. Weld. 7 (2005) 36-43 (in Russian).
- P. Rudling, A. Strasser, F. Garzarolli, Welding of zirconium alloys: zirats special topic report, A.N.T. Int., Skultuna, 2007.
- M.S. Slobodyan, Methods of creation of permanent zirconium alloy joints in reactor art: a review, Tsvetnye Met. 10 (2016) 91-98, https://doi.org/10.17580/tsm.2016.10.13.
- J.W. Bennett, Commissioning of NAA at the new OPAL reactor in Australia, J. Radioanal. Nucl. Chem. 278 (2008) 671-673, https://doi.org/10.1007/s10967-008-1502-0.
- A.G. Samoilov, V.S. Volkov, Fuel elements of nuclear reactors, Soviet J. Atom. Energy 6 (1960) 150-164, https://doi.org/10.1007/BF01481447, 3.
- W.A. Aschoff, E.F. Baroch, Electron beam applications to refractory metals, J. Met. 3 (1962) 204-207.
- H. Suzuki, T. Hashimoto, H. Matsuda, Electron-beam welding for pure zirconium and Zircaloy-2 alloy, J. Jpn. Weld. Soc. 31 (1962) 44-52, https://doi.org/10.2207/qjjws1943.31.44, 1, (in Japanese).
- H. Suzuki, T. Hashimoto, H. Matsuda, A study on electron-beam welding conditions of sheets of refractory metals, J. Jpn. Weld. Soc. 38 (1963) 378-383, https://doi.org/10.2207/qjjws1943.32.378, 4, (in Japanese).
- H. Suzuki, T. Hashimoto, H. Matsuda, Some experiments on properties of electron-beam welds of reactive metals and other alloys, J. Jpn. Weld. Soc. 38 (7) (1963) 618-627, https://doi.org/10.2207/qjjws1943.32.618 (in Japanese).
- H. Suzuki, T. Hashimoto, H. Matsuda, Effect of electron-beam welding parameters on characteristics of bead section, J. Jpn. Weld. Soc. 32 (1963) 609-617, https://doi.org/10.2207/qjjws1943.32.609, 7, (in Japanese).
- H. Suzuki, T. Hashimoto, H. Matsuda, Mechanism of penetration and bead shape in electron-beam welding, J. Jpn. Weld. Soc. 32 (1963) 503-513, https://doi.org/10.2207/qjjws1943.32.503, 6, (in Japanese).
- H. Suzuki, T. Hashimoto, H. Matsuda, Welding forces and bead formation mechanism in electron-beam welding, J. Jpn. Weld. Soc. 32 (1963) 996-1005, https://doi.org/10.2207/qjjws1943.32.996, 10, (in Japanese).
- T. Hashimoto, H. Matsuda, Calculation by thermal conduction theory and its discussion for the penetration depth in electron-beam weld bead, J. Jpn. Weld. Soc. 33 (1964) 726-734, https://doi.org/10.2207/qjjws1943.33.9_726, 9, (in Japanese).
- T. Hashimoto, H. Matsuda, On the cooling process and prediction of welds in electron-beam welding, J. Jpn. Weld. Soc. 33 (1964) 918-927, https://doi.org/10.2207/qjjws1943.33.10_918, 10, (in Japanese).
- T. Hashimoto, H. Matsuda, O. Ohashi, H. Irie, Experiments on soft-vacuum electron beam welding, J. Jpn. Weld. Soc. 38 (1969) 1090-1097, https://doi.org/10.2207/qjjws1943.38.10_1090, 10, (in Japanese).
- I.S. Lupakov, B.S. Rodchenkov, V.N. Vukolova, V.N. Tyurin, Structure and phase composition of weldments in the Zr-2.5Nb alloy, Met. Sci. Heat Treat. 15 (1973) 379-381, https://doi.org/10.1007/BF01166648, 5.
- E.Yu Rivkin, A.M. Vasnin, V.E. Mozharov, Resistance of zirconium alloys to fracture, Sov. Mater. Sci. 12:6 (1977) 589-593, https://doi.org/10.1007/BF00721752.
- V.N. Tyurin, B.G. Parfenov, A.I. Evstyukhin, YuF. Bychkov, M.I. Plyshevsky, N.A. Cherkasov, L.T. Rudenekaya, V.V. Osipov, N.S. Rassoshkina, Study of structural transformations in welded joints of zirconium alloys with niobium during heat treatment, in: V.S. Emelyanova, A.I. Evstyukhina (Eds.), Zirconium and its Alloys, Energy Publishing, Moscow, 1982, pp. 55-70 (in Russian).
- V.V. Ivanov, Fatigue crack propagation resistance of welded joints in a zirconium alloy with 2.5%Nb, Weld. Int. 1:9 (1987) 848-849, https://doi.org/10.1080/09507118709451107.
- V.N. Tyurin, Effect of rolling parameters on the structure and properties of welded joints in a zirconium alloy with 2.5%Nb, Weld. Int. 2:5 (1988) 449-451, https://doi.org/10.1080/09507118809447496.
- S.V. Rybakov, A.B. Levitskaya, Mechanical and corrosion properties of welded joints in a zirconium alloy when interacting with liquid cadmium and cesium, Weld. Int. 2 (1988) 20-22, https://doi.org/10.1080/09507118809451123, 1.
- YuA. Grigorovich, Mechanical properties of welded joints in zirconium alloys, Weld. Int. 3:12 (1989) 1063-1066, https://doi.org/10.1080/09507118909449082.
- M. Miura, K. Ogawa, Welding and bonding of zirconium and its alloys, Weld. Int. 3:7 (1989) 591-596, https://doi.org/10.1080/09507118909446619.
- T. Michio, A. Nobuyuki, H. Motomu, S. Tetsumi, Electron beam welding of zirconium plate, Trans. JWRI 19:1 (1990) 149-150. http://hdl.handle.net/11094/9918.
- V.A. Vinogradov, L.N. Shchavelev, V.S. Popenko, V.A. Sereznov, Welding components of the active zone of nuclear reactors, Weld. Int. 8:7 (1994) 546-549, https://doi.org/10.1080/09507119409548646.
- V.V. Melyukov, Effect of the optimum thermal welding conditions on residual strains and stresses in welded joints in Zr-2.5%Nb alloy, Weld. Int. 11: 8 (1997) 639-641, https://doi.org/10.1080/09507119709448447.
- M.I. Plyshevskii, N.S. Rassoshkina, A.N. Semenov, V.N. Tyurin, Effect of shielding conditions in welding and of surface preparation quality on corrosion resistance of welded joints in zirconium, Weld. Int. 15:6 (2001) 494-496, https://doi.org/10.1080/09507110109549394.
- A.G. Poptsov, V.V. Melyukov, A system for contactless control of the temperature field in welding and local heat treatment of pipes made of zirconium alloys, Weld. Int. 15:3 (2001) 235-237, https://doi.org/10.1080/09507110109549349.
- V.I. Vasilkov, A.A. Kislitsky, N.V. Onuchin, V.V. Rozhkov, A.V. Strukov, V.B. Chizhov, P.I. Lavrenyuk, On the causes of the formation of defects in E110 alloy welds made by electron beam welding and methods for dealing with them, Automat. Weld. 5 (2002) 41-43 (in Russian).
- S.A. Sirenko, Study of welded joining of the fuel rod end details with cladding of alloy Zr1Nb, produced different types of welding 182:13 (2003) 182-185. Questions of Atomic Science and Technology. Series: Vacuum, Pure Materials, Superconductors, (in Russian).
- Y.S. Kim, S.J. Choi, Y.M. Cheong, Review of the initiation and arrest temperatures for delayed hydride cracking in zirconium alloys, Met. Mater. Int. 11:1 (2005) 39-47. https://doi.org/10.1007/BF03027482
- E.M. Oks, Plasma Cathode Electron Sources: Physics, Technology, Applications, NTL, Tomsk, 2005 (in Russian).
- M.Y. Yao, B.X. Zhou, Q. Li, W.Q. Liu, Y.L. Chu, The effect of alloying modifications on hydrogen uptake of zirconium-alloy welding specimens during corrosion tests, J. Nucl. Mater. 350 (2006) 195-201, https://doi.org/10.1016/j.jnucmat.2005.12.005.
- V.V. Melyukov, A.G. Korepanov, D.A. Repkin, M.I. Plyshevskii, Controlling the thermal regime of combined welding and local thermocyclic treatment of circumferential welded joints, Weld. Int. 22:8 (2008) 544-548, https://doi.org/10.1080/09507110802383303.
- T.K. Saha, A.K. Ray, Vacuum e the ideal environment for welding of reactive materials, J. Phys. Conf. 114 (2008), 012047, https://doi.org/10.1088/1742-6596/114/1/012047.
- S. Tonpe, N. Saibaba, R.N. Jayaraj, A. Ravi Shankar, U. Kamachi Mudali, B. Raj, Process development for fabrication of Zircaloy-4 dissolver assembly for reprocessing of spent nuclear fuel, Energy Procedia 7 (2011) 459-467, https://doi.org/10.1016/j.egypro.2011.06.063.
- U. Kamachi Mudali, A. Ravi Shankar, R. Natarajan, N. Saibaba, B. Raj, Application of zirconium alloys for reprocessing plant components, Nucl. Technol. 182:3 (2013) 349-357, https://doi.org/10.13182/NT12-73.
- U. Kamachi Mudali, A. Ravi Shankar, Electrochemical and surface studies on Zircaloy-4 exposed to concentrated nitric acid medium, Trans. Indian Inst. Met. 62 (6) (2009) 545-549. https://doi.org/10.1007/s12666-009-0091-0
- A.N. Semenov, M.I. Plyshevskii, V.P. Gordo, N.S. Rassoshkina, Application of the method of design of an optimum experiment to determine the regimes of thermomechanical treatment of welded joints of zirconium alloys, Met. Sci. Heat Treat. 55:5-6 (2013) 265-269, https://doi.org/10.1007/s11041-013-9617-5.
- O. Muranskya, T.M. Holden, O. Kirstein, J.A. James, A.M. Paradowska, L. Edwards, Evaluation of residual stresses in electron-beam welded Zr2.5Nb0.9Hf Zircadyne flange mock-up of a reflector vessel beam tube flange, J. Nucl. Mater. 438 (2013) 154-162, https://doi.org/10.1016/j.jnucmat.2013.02.045.
- A.N. Semenov, M.I. Plyshevskii, V.P. Gordo, N.S. Rassoshkina, V.V. Melyukov, A.G. Korepanov, Optimization of the heating source in electron beam welding of zirconium pipes, Weld. Int. 27:4 (2013) 300-303, https://doi.org/10.1080/09507116.2012.715909.
- M.N. Jha, D.K. Pratihar, A.V. Bapat, V. Dey, M. Ali, A.C. Bagchi, Knowledgebased systems using neural networks for electron beam welding process of reactive material (Zircaloy-4), J. Intell. Manuf. 25 (2014) 1315-1333, https://doi.org/10.1007/s10845-013-0732-3.
- A.N. Semenov, M.I. Plyshevskii, V.V. Melyukov, A.G. Korepanov, N.S. Rassoshkina, A.A. Uvarov, Properties of welded joints from alloy Zr-2.5% Nb after electron-beam local thermocycling, Met. Sci. Heat Treat. 55 (2014) 670-674, https://doi.org/10.1007/s11041-014-9688-y, 11e12.
- P. Bendeich, V. Luzin, M. Law, Residual stresses in a welded Zircaloy cold neutron source containment vessel, Mater. Sci. Forum 777 (2014) 194-198. https://doi.org/10.4028/www.scientific.net/MSF.777.194.
- B. Zhang, X. Li, T. Wang, X. Wang, Microstructure and corrosion behavior of Zr-702 joined by electron beam welding, Vacuum 121 (2015) 159-165, https://doi.org/10.1016/j.vacuum.2015.08.005.
- G.R. Vadolia, K.P. Singh, Electron beam welding: study of process capability and limitations towards development of nuclear components, IOP Conf. Ser.: J. Phys. 823 (2017), 012040, https://doi.org/10.1088/1742-6596/823/1/012040.
- C.J. Pargaa, I.J. van Rooyen, B.D. Coryell, W.R. Lloyd, L.N. Valenti, H. Usman, Room temperature mechanical properties of electron beam welded Zircaloy4 sheet, J. Mater. Process. Technol. 241 (2017) 73-85, https://doi.org/10.1016/j.jmatprotec.2016.11.001.
- B. Bandi, S.K. Dinda, J. Kar, G.G. Roy, P. Srirangam, Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints: X-ray tomography study, Vacuum 158 (2018) 172-179, https://doi.org/10.1016/j.vacuum.2018.09.060.
- J. Vandegrift, C.J. Parga, B. Coryell, D.P. Butt, B.J. Jaques, Oxidation behavior of welded Zry-3, Zry-4, and Zr-1Nb tubes, Nucl. Mater. Energy 21 (2019), 100714, https://doi.org/10.1016/j.nme.2019.100714.
- L.-F. Wei, C. Bao, S.-Z. Wang, Y. Zheng, M.-B. Zhou, Low cycle fatigue properties of hydrogenated welding sheets of Zr-Sn-Nb alloy using funnel-shaped flat specimens, Nucl. Eng. Technol. 52 (8) (2020) 1724-1731, https://doi.org/10.1016/j.net.2020.01.011.
- H. Schultz, Electron Beam Welding, Abington Publishing, Cambridge, 1994.
- R.O. Cirimello, E.E. Perez, O. Saracco, S. Harriague, Recent developments in power reactor fuel in Argentina, in: International Symposium on Improvements in Water Reactor Fuel Technology and Utilization, 1986. Stockholm.
- F.L. Zhang, S.C. Zhang, W.D. He, Fuel design for extended burnup in a demonstration assembly, in: International Symposium on Improvements in Water Reactor Fuel Technology and Utilization, 1986. Stockholm.
- H.G. Weidinger, H. Lettau, Advanced material and fabrication technology for LWR fuel, in: International Symposium on Improvements in Water Reactor Fuel Technology and Utilization, 1986. Stockholm.
- G.B. Goncharov, V.F. Grabin, A.M. Korol, L.I. Adeeva, Structure and properties of welded joints in laser and arc welding Zr-2.5%Nb alloy, Weld. Int. 7:10 (1993) 798-801, https://doi.org/10.1080/09507119309548494.
- S.-S. Kim, C.-Y. Lee, M.-S. Yang, Investigation on Nd:YAG laser weldability of Zircaloy-4 end cap closure for nuclear fuel elements, J. Kor. Nucl. Soc. 33:2 (2001) 175-183.
- S.-S. Kim, J.-W. Lee, J.-H. Koh, Y.-H. Lee, Technology of the end cap laser welding for irradiation fuel rods, J. KWS 21:6 (2003) 626-631.
- Q. Wan, X. Bai, X. Liu, Impact of yttrium ion implantation on corrosion behavior of laser beam welded Zircaloy-4 in sulfuric acid solution, Appl. Surf. Sci. 252 (2005) 1974-1980, https://doi.org/10.1016/j.apsusc.2005.03.154.
- Q. Wan, X. Bai, X. Zhang, Impact of high dose krypton ion irradiation on corrosion behavior of laser beam welded Zircaloy-4, Mater. Res. Bull. 41 (2006) 387-395, https://doi.org/10.1016/j.materresbull.2005.08.007.
- K. Une, S. Ishimoto, Crystallographic measurement of the b to a phase transformation and d-hydride precipitation in a laser-welded Zircaloy-2 tube by electron backscattering diffraction, J. Nucl. Mater. 389 (2009) 436-442, https://doi.org/10.1016/j.jnucmat.2009.02.033.
- K.-N. Song, S.-S. Kim, S.-H. Lee, S.-B. Lee, Laser welding unit for intersection line welding of spacer grid inner straps and its application, J. Laser Micro/Nanoeng. 4 (2009) 11-17, https://doi.org/10.2961/jlmn.2009.01.0003, 1.
- N. Boutarek, B. Azzougui, D. Saidi, M. Neggache, Microstructure change in the interface of CO2 laser welded zirconium alloys, Phys. Procedia 2 (2009) 1159-1165, https://doi.org/10.1016/j.phpro.2009.11.078.
- K.-N. Song, S.-D. Hong, S.-H. Lee, H.-Y. Park, Effect of mechanical properties in the weld zone on the structural analysis results of a plate-type heat exchanger prototype and pressurized water reactor spacer grid, J. Nucl. Sci. Technol. 49 (9) (2012) 947-960, https://doi.org/10.1080/00223131.2012.713571.
- K.-N. Song, S.-H. Lee, Effect of weld properties on the crush strength of the PWR spacer grid, Sci. Technol. Nucl. Install. (2012), 540285, https://doi.org/10.1155/2012/540285.
- D.H. Jeong, J.H. Kim, J.K. Park, K.L. Jeon, S.K. Lee, J.M. Suh, Fatigue characteristics of laser welded Zircaloy thin sheet, Int. J. Mod. Phys. 6 (2012) 367-372, https://doi.org/10.1142/S2010194512003455.
- Q. Han, D. Kim, D. Kim, H. Lee, N. Kim, Laser pulsed welding in thin sheets of Zircaloy-4, J. Mater. Process. Technol. 212 (2012) 1116-1122, https://doi.org/10.1016/j.jmatprotec.2011.12.022.
- W. Tao, C. Cai, L. Li, Y. Chen, Y.L. Wang, Pulsed laser spot welding of intersection points for Zircaloy-4 spacer grid assembly, Mater. Des. 52 (2013) 487-494, https://doi.org/10.1016/j.matdes.2013.05.037.
- J. Hong, C.-Y. Joung, K.-H. Kim, S.-H. Heo, H.-G. Kim, Study on fiber laser welding conditions for the fabrication of a nuclear fuel rod, Int. J. Precis. Eng. Manuf. 15:4 (2014) 777-781, https://doi.org/10.1007/s12541-014-0399-5.
- S. Livingstone, L. Xiao, E.C. Corcoran, G.A. Ferrier, K.N. Potter, Development of laser welded appendages to Zircaloy-4 fuel tubing (sheath/cladding), Nucl. Eng. Des. 284 (2015) 97-105, https://doi.org/10.1016/j.nucengdes.2014.11.029.
- S. Kim, W. Lee, D. Kim, One-step distortion simulation of pulsed laser welding with multi-physics information, Int. J. Simulat. Model. 14:1 (2015) 85-97, https://doi.org/10.2507/IJSIMM14(1)8.291.
- S. Kim, W.-J. Lee, Q. Han, D. Kim, Pulsed laser induced mechanical behavior of Zircaloy-4, J. Mater. Res. 30:4 (2015) 556-565, https://doi.org/10.1557/jmr.2014.390.
- C. Cai, W. Tao, L. Li, Y. Chen, Weld bead formation and corrosion behavior of pulsed laser welded zirconium alloy, Int. J. Adv. Manuf. Technol. 77 (2015) 621-628, https://doi.org/10.1007/s00170-014-6474-3.
- C. Cai, L. Li, W. Tao, G. Peng, X. Wang, Weld bead size, microstructure and corrosion behavior of zirconium alloys joints welded by pulsed laser spot welding, J. Mater. Eng. Perform. 25 (9) (2016) 3783-3792, https://doi.org/10.1007/s11665-016-2250-x.
- L. Hu, D. Zhou, X. Jia, Y. Lu, Z. Tan, D. Jiang, Numerical simulation and laser butt welding of Zr-Sn-Nb-Fe zirconium alloy sheets, Zhongguo Jiguang Chin. J. Lasers 43:7 (2016), 0702002, https://doi.org/10.3788/CJL201643.0702002.
- J.-N. Yang, L.-J. Zhang, J. Ning, Q.-L. Bai, J.-Y. Pei, J.-Z. Liu, G.-F. Lu, J.-X. Zhang, Fiber laser welding characteristics of commercially pure zirconium (R60702) and structure-mechanics-corrosion performances of the joint, Int. J. Refract. Metals Hard Mater. 73 (2018) 58-73, https://doi.org/10.1016/j.ijrmhm.2018.01.023.
- G. Satyanarayana, K.L. Narayana, B. Nageswara Rao, Identification of optimum laser beam welding process parameters for E110 zirconium alloy butt joint based on Taguchi-CFD simulations, Lasers Manuf. Mater. Process. 5:2 (2018) 182-199, https://doi.org/10.1007/s40516-018-0061-7.
- G. Satyanarayana, K.L. Narayana, B. Nageswara Rao, Numerical simulations on the laser spot welding of zirconium alloy endplate for nuclear fuel bundle assembly, Lasers Manuf. Mater. Process. 5:1 (2018) 53-70, https://doi.org/10.1007/s40516-018-0061-7.
- C. Cai, L. Li, G. Peng, Comparative study of oxides formed on fusion zone and base metal of laser welded Zr-1.0Sn-1.0Nb-0.1Fe alloy, J. Mater. Eng. Perform. 28:2 (2019) 1161-1172, https://doi.org/10.1007/s11665-018-3836-2.
- M.A. Elkin, A.S. Kiselev, M.S. Slobodyan, Pulsed laser welding of Zre1%Nb alloy, Nucl. Eng. Technol. 51 (3) (2019) 776-783, https://doi.org/10.1016/j.net.2018.12.016.
- M.S. Slobodyan, S.K. Pavlov, G.E. Remnev, Corrosion and high-temperature steam oxidation of E110 alloy and its laser welds after ion irradiation, Corrosion Sci. 152 (2019) 60-74, https://doi.org/10.1016/j.corsci.2019.02.031.
- G. Satyanarayana, K.L. Narayana, B. Nageswara Rao, M.S. Slobodyan, M.A. Elkin, A.S. Kiselev, Numerical simulation of the processes of formation of a welded joint with a pulsed ND:YAG laser welding of Zr-1%Nb alloy, Therm. Eng. 66:3 (2019) 210-218, https://doi.org/10.1134/S0040601519030066.
- M.S. Slobodyan, V.N. Kudiiarov, A.M. Lider, Effect of energy parameters of pulsed laser welding of Zr-1%Nb alloy on metal contamination with gases and properties of welds, J. Manuf. Process. 45 (2019) 472-490, https://doi.org/10.1016/j.jmapro.2019.06.025.
- G.P. Sakamiti, R.H.M.D. Siqueira, S.M.D. Carvalho, J.B. Meireles, M.S.F.D. Lima, Weldability of a zirconium alloy comparing resistance and pulsed laser methods, Nucl. Mater. Energy 20 (2019), 100693, https://doi.org/10.1016/j.nme.2019.100693.
- J.F. Lancaster, The Physics of Welding, Pergamon Press, Oxford, 1986.
- R.K. Jain, D.K. Agrawal, S.C. Vishwakarma, A.K. Choubey, B.N. Upadhyaya, S.M. Oak, Development of underwater laser cutting technique for steel and zircaloy for nuclear applications, Pramana - J. Phys. 75:6 (2010) 1253-1258, https://doi.org/10.1007/s12043-010-0214-5.
- P.A. Leontiev, N.T. Chekanova, M.G. Khan, Laser Surface Treatment of Metals and Alloys, Metallurgy, Moscow, 1986.
- W. Reitz, J. Rawers, Immersion corrosion studies of laser processed zirconium, J. Mater. Sci. Lett. 9:3 (1990) 355-357, https://doi.org/10.1007/BF00725849.
- K.F. Amouzouvi, L.J. Clegg, R.C. Styles, Surface modifications of zirconium alloys by laser glazing, in: S.A. Meguid (Ed.), Surface Engineering, Springer, Dordrecht, 1990, pp. 270-279, https://doi.org/10.1007/978-94-009-0773-7_28.
- J. Rawers, W. Reitz, S. Bullard, E.K. Roub, Surface and corrosion study of laserprocessed zirconium alloys, Corrosion 47:10 (1991) 769-777, https://doi.org/10.5006/1.3585187.
- W. Reitz, J. Rawers, Effect of laser surface melted zirconium alloys on microstructure and corrosion, resistance, J. Mater. Sci. 27 (9) (1992) 2437-2443, https://doi.org/10.1007/BF01105055.
- M. Munidasa, M. Tian-Chi, A. Mandelis, S.K. Brown, L. Mannik, Nondestructive depth profiling of laser-processed Zr-2.5 Nb alloy by IR photothermal radiometry, Mater. Sci. Eng. 159:1 (1992) 111-118, https://doi.org/10.1016/0921-5093(92)90404-O.
- K.F. Amouzouvi, L.J. Clegg, R.C. Styles, L. Mannik, T.-C. Ma, S.K. Brown, B.-W. Gu, Microstructural changes in laser hardened Zr-2.5Nb alloy, Scripta Metall. Mater. 32 (2) (1995) 289-294, https://doi.org/10.1016/S0956-716X(99)80052-1.
- J. Xu, X. Bai, F. He, S. Wang, X. He, Y. Fan, Influence of Ar ion bombardment on the uniform corrosion resistance of laser-surface-melted Zircaloy-4, J. Nucl. Mater. 265 (3) (1999) 240-244, https://doi.org/10.1016/S0022-3115(98)00732-6.
- V.G. Kirichenko, A.I. Kirdin, T.A. Kovalenko, A.V. Ostapov, The influence of impulse laser irradiation on structure of surface lays zirconium alloys, Bulletin of Kharkov University. Series "Nuclei, parts, fields" 777 (2) (2007) 41-50, 34, (in Russian).
- L. Chai, B. Chen, S. Wang, Z. Zhou, W. Huang, Microstructural characteristics of a commercially pure Zr treated by pulsed laser at different powers, Mater. Char. 110 (2015) 25-32, https://doi.org/10.1016/j.matchar.2015.10.008.
- A. Harooni, A.M. Nasiri, A.P. Gerlich, A. Khajepour, A. Khalifa, J.M. King, Processing window development for laser cladding of zirconium on zirconium alloy, J. Mater. Process. Technol. 230 (2016) 263-271, https://doi.org/10.1016/j.jmatprotec.2015.11.028.
- L. Chai, B. Chen, S. Wang, N. Guo, C. Huang, Z. Zhou, W. Huang, Microstructural changes of Zr702 induced by pulsed laser surface treatment, Appl. Surf. Sci. 364 (2016) 61-68, https://doi.org/10.1016/j.apsusc.2015.12.105.
- B. Chen, L. Chai, S. Wang, N. Guo, B. Song, Z. Zhou, C. Huang, Investigation of microstructures of laser surface-treated Zr702 sheet using electron channeling contrast imaging and electron backscatter diffraction techniques, Surf. Coating. Technol. 296 (2016) 13-19, https://doi.org/10.1016/j.surfcoat.2016.03.099.
- L. Chai, H. Wu, S. Wang, K. Chen, T. Wang, J. Xia, Characterization of microstructure and hardness of a Zr-2.5Nb alloy surface-treated by pulsed laser, Mater. Chem. Phys. 198 (2017) 303-309, https://doi.org/10.1016/j.matchemphys.2017.06.032.
- L. Chai, S. Wang, H. Wu, N. Guo, H. Pan, L. Chen, K.L. Murty, B. Song, a/b Transformation characteristics revealed by pulsed laser-induced non-equilibrium microstructures in duplex-phase Zr alloy, Sci. China Technol. Sci. 60 (2017) 1255-1262, https://doi.org/10.1007/s11431-016-9038-y.
- L.J. Chai, S.Y. Wang, H. Wu, Z. Yang, H. Pan, B. Song, N. Guo, Bimodal plate structures induced by pulsed laser in duplex-phase Zr alloy, Sci. China Technol. Sci. 60 (2017) 587-592, https://doi.org/10.1007/s11431-016-0527-6.
- L. Chai, K. Chen, Y. Zhi, K.L. Murty, L.-Y. Chen, Z. Yang, Nanotwins induced by pulsed laser and their hardening effect in a Zr alloy, J. Alloys Compd. 748 (2018) 163-170, https://doi.org/10.1016/j.jallcom.2018.03.126.
- V. Proskuryakov, S. Mezentzov, I. Rodionov, Structure and hardness of the zirconium surface after laser modification, IOP Conf. Ser.: J. Phys. 1124 (2018), 081042, https://doi.org/10.1088/1742-6596/1124/8/081042.
- K. Chen, L. Zeng, Z. Li, L. Chai, Y. Wang, L.-Y. Chen, H. Yu, Effects of laser surface alloying with Cr on microstructure and hardness of commercial purity Zr, J. Alloys Compd. 784 (2019) 1106-1112, https://doi.org/10.1016/jjallcom.2019.01.097.
- J. Dai, K. Chen, L. Chai, Y. Zhu, H. Guan, N. Guo, Surface microstructural characteristics and hardness of Cr-coated Zr702 sheet processed by pulsed laser, Intermetallics 119 (2020) 106710, https://doi.org/10.1016/j.intermet.2020.106710.
- B. Lustman, F. Kerze (Eds.), The Metallurgy of Zirconium, McGraw-Hill Book Company, New York, 1955.
- V. Gheata, A.C. Galeriu, I. Dobos, F. Glodeanu, Experience gained in the fabrication of experimental fuel rods with natural uranium and Zircaloy-4 cladding for irradiation experiments, in: International Symposium on Water Reactor Fuel Element Fabrication with Special Emphasis on the Effect of Fabrication Technology on Fuel Performance, 1978. Prague.
- A.S. Bain, W.R. Tarasuk, K.T. Bates, D.G. Hardy, CANDU fuel e the influence of design on fuel performance, in: International Symposium on Water Reactor Fuel Element Fabrication with Special Emphasis on the Effect of Fabrication Technology on Fuel Performance, 1978. Prague.
- D.G. Hardy, J.C. Wood, V.F. Urbanic, Zirconium-niobium alloys as fuel cladding for water cooled reactors, in: I Nternational Symposium on Water Reactor Fuel Element Fabrication with Special Emphasis on the Effect of Fabrication Technology on Fuel Performance, 1978. Prague.
- R.A. Bordoni, A.M. Olmedo, Microstructure in the weld region in seam welded and resistance welded Zircaloy-4 tubing, J. Mater. Sci. 16 (1981) 1527-1532. https://doi.org/10.1007/BF02396870
- J.-H. Koh, J.-W. Lee, S.-H. Jung, The effect of weld line on the mechanical strengths and its elimination process in the Zr-4 resistance upset welds, J. Kor. Nucl. Soc. 23:1 (1991) 1-11.
- L.T. Babkin, K.K. Sukhov, D.V. Sannikov, A.Ya Yashunskii, O.K. Peslyak, Sealing of fuel elements for nuclear reactors by resistance butt welding, Weld. Int. 14:2 (2000) 162-164, https://doi.org/10.1080/09507110009549158.
- I.N. Sidorov, A.A. Gradovich, A.A. Kislitsky, V.V. Rozhkov, A.V. Strukov, I.G. Chapaev, P.I. Lavrenyuk Equipment for resistance upset welding of fuel elements of nuclear reactors, Automat. Weld. 3 (2002) 50-52 (in Russian).
- D.S. Setty, R.P. Ravinder, A.L.N. Murthy, Resistance butt welding of zirconium alloy material, Mater. Manuf. Process. 23:8 (2008) 844-851, https://doi.org/10.1080/10426910802384904.
- S.-S. Kim, G.-I. Park, J.-W. Lee, J.-H. Koh, C.-H. Park, Effect of heat on the soundness of Zircaloy-4 end cap closure using a resistance upset welding, J. Nucl. Sci. Technol. 47 (3) (2010) 262-268, https://doi.org/10.1080/18811248.2010.9711953.
- Z. Lin, F. Chen, G. Liang, Numerical simulation of residual stress and deformation of special resistance welding of nuclear power zirconium tube, Adv. Mater. Res. 154-155 (2011) 304-309. https://doi.org/10.4028/www.scientific.net/AMR.154-155.304.
- F. da Silva Junqueira, J.R. Silva, Development of a suitable weld geometry for pressure resistance welding of the leader test assembly (LTA'S) 16NGF fuel assembly fuel rod at ANGRA-1 nuclear power plant, in: International Nuclear Atlantic Conference, Recife, 2013.
- J.-Y. Park, T.-H. Na, T.-H. Lee, J.-H. Lee, B.-Y. Lee, J.-S. Kim, Effect of applied current on the formation of defect in PWR nuclear fuel rods in resistance pressure welding process, J. Nucl. Sci. Technol. 52 (5) (2015) 748-757, https://doi.org/10.1080/00223131.2014.971900.
- T.-H. Na, S.-J. Na, M.-H. Ko, D.-S. Hwang, Algorithm development for quality monitoring on end plug resistance weldment of nuclear fuel rods, Int. J. Adv. Manuf. Technol. 85 (5-8) (2016) 991-1006, https://doi.org/10.1007/s00170-015-7997-y.
- T.-H. Na, S.-J. Na, Y.-W. Park, A study on characteristics of end plug resistance welding process in nuclear fuel rods by experiment and numerical simulation, Int. J. Adv. Manuf. Technol. 98 (2018) 2241-2255, https://doi.org/10.1007/s00170-018-2365-3.
- T.-H. Na, B.-H. Lee, M.-W. Kim, S.-J. Na, Quality monitoring of end plug resistance weldment for nuclear fuel rods by electrode displacement, Int. J. Adv. Manuf. Technol. 99 (2018) 2509-2522, https://doi.org/10.1007/s00170-018-2642-1.
- S.-S. Kim, D.-S. Koo, G.-I. Park, J.-H. Koh, Remote resistance welding of Zr-4 endplate for DUPIC fuel fabrication, Mater. Sci. Forum 580-582 (2008) 397-400. https://doi.org/10.4028/www.scientific.net/MSF.580-582.397.
- S.-S. Kim, J.-W. Lee, G.-I. Park, J.-H. Koh, Development of Zircaloy-4 endplate welding technology for a DUPIC fuel bundle assembly, J. Nucl. Sci. Technol. 46:2 (2009) 103-108, https://doi.org/10.1080/18811248.2007.9711512.
- N.A.P. Kiran Kumar, J.A. Szpunar, Z. He, Microstructural studies and crystallographic orientation of different zones and d-hydrides in resistance welded Zircaloy-4 sheets, J. Nucl. Mater. 414 (2011) 341-351, https://doi.org/10.1016/j.jnucmat.2011.03.027.
- S. Kim, K. Kim, J. Lee, J. Koh, Design and Fabrication of Remote Welding Equipment in a hot-cell, Science and Technology of Nuclear Installations, 2013, 970942, https://doi.org/10.1155/2013/970942.
- H. Suzuki, T. Hashimoto, F. Matsuda, K. Tanuma, Spot welding of zirconium and Zircaloy-2 alloy sheets, J. Jpn. Weld. Soc. 30:6 (1961) 418-428, https://doi.org/10.2207/qjjws1943.30.418 (in Japanese).
- A.M. Olmedo, Microstructure of the weld region in resistance-welded Zircaloy-4, J. Mater. Sci. 15 (1980) 1050-1051. https://doi.org/10.1007/BF00552120
- S. Mishra, R.T. Savalia, K. Bhanumurthy, G.K. Dey, S. Banerjee, Characterisation of metallic glass incorporated Zircaloy-2 weldments, J. Nucl. Mater. 227 (1995) 122-129. https://doi.org/10.1016/0022-3115(95)00105-0
- E.V. Yudina, T.M. Poletika, S.F. Gnyusov, L.B. Zuev, Examination of the structural condition of welded joints in zirconium elements of nuclear reactors, Weld. Int. 20:12 (2006) 965-969, https://doi.org/10.1533/wint.2006.3708.
- S.F. Gnyusov, A.S. Kiselev, M.S. Slobodyan, B.F. Sovetchenko, M.M. Nekhoda, A.V. Strukov, P.M. Yurin, Formation of a joint in resistance spot microwelding, Weld. Int. 19 (2005) 737-741, https://doi.org/10.1533/wint.2005.3510, 9.
- M.S. Slobodyan, A.S. Kiselev, Optimization of welding parameters for smallscale resistance spot welding of zirconium alloys, Mater. Sci. Forum 970 (2019) 145-152. https://doi.org/10.4028/www.scientific.net/MSF.970.145.
- A.S. Kiselev, M.S. Slobodyan, Effects of electrode degradation on properties of small-scale resistance spot welded joints of E110 alloy, Mater. Sci. Forum 970 (2019) 227-235. https://doi.org/10.4028/www.scientific.net/MSF.970.227.
- E.Z. Akbolatov, A.S. Kiselev, M.S. Slobodyan, Prediction and stabilization of initial resistance between electrodes for small-scale resistance spot welding, Weld. World 63:2 (2019) 443-457, https://doi.org/10.1007/s40194-018-0671-x.
- J.B. Meireles, G.P. Sakamiti, J.A. de Castro, Evaluation of electrodes of the resistance spot welding with a chromium coating on the welding of Zircalloy, Soldagem Inspegao 23:3 (2018) 350-363, https://doi.org/10.1590/0104-9224/SI2303.05 (in Portuguese).
- A.B. Aleksandrov, YuA. Zhukov, V.N. Vasyukov, I.S. Gruzman, YuK. Karlov, V.G. Marchenko, A.A. Spektor, Automatic detection of spills and gas pockets upon ultrasonic checking of welds in zirconium fuel claddings, Russ. J. Nondestr. Test. 40:4 (2004) 233-238, https://doi.org/10.1023/B:RUNT.0000043671.04266.cb.
- J. Fu, R. Tan, Q. Wang, J. Deng, M. Liu, A cone beam computed tomography inspection method for fuel rod cladding tubes, Nucl. Instrum. Methods Phys. Res. 688 (2012) 1-6, https://doi.org/10.1016/j.nima.2012.05.093.
- M.N.V. Viswanath, K.R. Subramanyam, K.S. Subramanian, B. Prahlad, R.N. Jayaraj, Evolution of ultrasonic testing for end closure welds for PHWR fuel elements at NFC, in: 18th World Conference on NDT, 2012. Durban, South Africa.
- YuK. Karlov, Development and Implementation of Automated Complexes of Non-destructive Testing of Nuclear Fuel, TPU, Tomsk, 2016 (in Russian).
피인용 문헌
- Fabrication of Copper Alloys as Conductive Materials via Laser Beam Powder Bed Fusion vol.10, pp.4, 2021, https://doi.org/10.7791/jspmee.10.265
- Incorporation of Taguchi approach with CFD simulations on laser welding of spacer grid fuel rod assembly vol.269, 2021, https://doi.org/10.1016/j.mseb.2021.115182
- High-energy surface processing of zirconium alloys for fuel claddings of water-cooled nuclear reactors vol.382, 2021, https://doi.org/10.1016/j.nucengdes.2021.111364