과제정보
This research was supported by the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT. (NRF2013M2B2B1075733).
참고문헌
- J.E. Cahalan, J.M. Kramer, J.F. Marchaterre, C.J. Mueller, D.R. Pedersen, R.H. Sevy, D.C. Wade, T.Y.C. Wei, Integral Fast Reactor Safety Features, No. CONF-880506-12, Argonne National Laboratory, Argonne, USA, 1988.
- K.J. Miles Jr., A.M. Tentner, Metal Fuel Safety Performance, No. CONF-880506- 18, Argonne National Lab, Argonne, USA, 1988.
- A.M. Tentner, E. Parma, T. Wei, R. Wigeland, Severe Accident Approach - Final Report. Evaluation of Design Measures for Severe Accident Prevention and Consequence Mitigation, No. ANL-GENIV-128, Argonne National Laboratory, Argonne, USA, 2010, https://doi.org/10.2172/973483.
- T.H. Bauer, A.E. Wright, W.R. Robinson, J.W. Holland, E.A. Rhodes, Behavior of modern metallic fuel in treat transient overpower tests, Nucl. Tech. 92 (3) (1990) 325-352, https://doi.org/10.13182/NT92-325.
- H. Heo, S.D. Park, D.W. Jerng, I.C. Bang, Visual study of ex-pin phenomena for SFR with metal fuel under initial phase of severe accidents by using simulants, J. Nucl. Sci. Technol. 53 (9) (2016) 1409-1416, https://doi.org/10.1080/00223131.2015.1120246.
- M.H. Lee, H. Hyo, I.C. Bang, D.W. Jerng, Effect of rupture size in Ex-pin phenomena of severe accident in SFR, in: Proceedings of 2017 International Congress on Advances in Nuclear Power Plants, Fukui and Kyoto, Japan, April 24-28, 2017.
- M.H. Lee, H. Hyo, D.W. Jerng, I.C. Bang, Phenomenological study on the Ex-pin phenomenain theinitial phase of HCDA onmetal-fueled SFR using simulant, Ann. Nucl. Energy 130 (2019) 34-46, https://doi.org/10.1016/j.anucene.2019.02.024.
- T. Sofu, J.M. Kramer, The SAS4A/SASSYS-1 Safety Analysis Code System, Chapter 11: FPIN2 Pre-failure Metal Fuel Pin Behavior Model, No. ANL/NE-16/19, Argonne National Laboratory, Argonne, USA, 2017.
- A. Biancheria, T.S. Roth, B.E. Sundquist, Steady-state and transient fuel performance modelling: LIFE-4 update, in: Proceedings of International Conference on Reliable Fuels for Liquid Metal Reactors 5.1-5.14, Tucson, USA, September 7-11, 1986.
- A. Karahan, Modeling of Thermos-Mechanical and Irradiation Behavior of Metallic and Oxide Fuels for Sodium Fast Reactors, Doctoral thesis, Massachusetts Institute of Technology, Cambridge, USA, 2009.
- Dassault Systems, Abaqus Version 2016 Manual, Velizy-Villacoublay, France, 2015.
- Y.Y. Liu, H.C. Tsai, D.A. Donahue, D.O. Pushis, F.E. Savoie, J.W. Holland, A.E. Wright, C. August, J.L. Bailey, D.R. Patterson, Whole-pin furnace system: an experimental facility for studying irradiated fuel pin behavior under potential reactor accident conditions, in: Proceedings of ANS Topical Meeting on Fast Reactor Safety 491, Snowbird, USA, August 12-16, 1990.
- Y.Y. Liu, H.C. Tsai, M.C. Billone, J.W. Holland, J.M. Kramer, Behavior of EBR-II Mk-V-type fuel elements in simulated loss-of-flow tests, J. Nucl. Mater. 204 (1993) 194-202, https://doi.org/10.1016/0022-3115(93)90217-M.
- J.M. Kramer, Y.Y. Liu, M.C. Billone, H.C. Tsai, Modeling the behavior of metallic fast reactor fuels during extended transients, J. Nucl. Mater. 204 (1993) 203-211, https://doi.org/10.1016/0022-3115(93)90218-N.
- W.R. Robinson, R.K. Lo, A.E. Wright, T.H. Bauer, G.S. Stanford, J.A. Morman, Integral fast reactor safety tests M2 and M3 in TREAT, in: Proceedings of ANS Winter Meeting, 50, November 10, 1985, pp. 352-353. San Francisco, USA.
- W.R. Robinson, T.H. Bauer, A.E. Wright, E.A. Rhodes, G.S. Stanford, A.E. Klickman, First TREAT transient overpower tests on U-Pu-Zr fuel:M5 and M6, Trans. Am. Nucl. Soc. 55 (1987) 418.
- N.E. Toredas, M.S. Kazimi, Nuclear Systems: Thermal Hydraulic Fundamentals, CRC press, Boca Raton, USA, 2012.
- L. Leibowitz, R.A. Blomquist, Thermal conductivity and thermal expansion of stainless steels D9 and HT9, Int. J. Thermophys. 9 (5) (1988) 873-883, https://doi.org/10.1007/BF00503252.
- J.K. Fink, L. Leibowitz, Thermodynamic and Transport Properties of Sodium Liquid and Vapor, No. ANL/RE-95/2, Argonne National Laboratory, Argonne, USA, 1995.
- N. Yamanouchi, M. Tamura, H. Hayakawa, A. Hishinuma, T. Kondo, Accumulation of engineering data for practical use of reduced activation ferritic steel: 8%Cr-56-2%W-0.2%V-0.04%Ta-Fe, J. Nucl. Mater. 191 (1992) 822-826, https://doi.org/10.1016/0022-3115(92)90587-B.
- A. Banerjee, S. Raju, R. Divakar, E. Mohands, High temperature heat capacity of alloy D9 using drop calorimetry based enthalpy increment measurements, Int. J. Thermophys. 28 (1) (2007) 97-108, https://doi.org/10.1007/s10765-006-0136-0.
- S. Sharafat, R. Amodeo, N.M. Ghoniem, Materials Data Base and Design Equations for the UCLA Solid Breeder Blanket, No. UCLA-ENG-8611/PPG-937, California University, Los Angenles, USA, 1986.
- K.J. Miles, The SAS4A/SASSYS-1 Safety Analysis Code System. Chapter 9: DEFORM-5 Metallic Fuel Cladding Transient Behavior Model, No. ANL/NE-16/19, Argonne National Laboratory, Argonne, USA, 2017.
- R.J. Dimelfi, J.M. Kramer, Modeling the effects of fast-neutron irradiation of the subsequent mechanical behavior of type 316 stainless steel, J. Nucl. Mater. 89 (1980) 338-346, https://doi.org/10.1016/0022-3115(80)90065-3.
- J.M. Kramer, R.J. Dimelfi, Modeling deformation and failure of fast reactor cladding during simulated accident transients, Nucl. Eng. Des. 63 (1) (1981) 47-54, https://doi.org/10.1016/0029-5493(81)90016-9.
- Bj Makenas, Swelling of 316 Stainless Steel and D9 Cladding in FFTF, No. ASTM-Stp33814s, American Society for Testing and Materials, Philadelphia, USA, 1987, https://doi.org/10.1520/STP33814S.
- T.H. Bauer, G.R. Fenske, J.M. Kramer, Cladding failure margins for metallic fuel in the integral fast reactor, in: Proceedings of International Conference on Structural Mechanics in Reactor Technology, August 17, 1987. Lausanne, Switzerland.
- A.B. Cohen, H. Tsai, L.A. Neimark, Fuel/cladding compatibility in U-19Pu-10Zr/HT9-clad fuel at elevated temperatures, J. Nucl. Mater. 204 (1993) 244-251, https://doi.org/10.1016/0022-3115(93)90223-L.
- H. Tsai, Fuel/cladding Compatibility in Irradiated Metallic Fuel Pins at Elevated Temperatures. in: Proceedings of ANS Topical Meeting on Fast Reactor Safety 257, Snowbird, USA, August 12-16, 1990.
- H.W. Ryu, K.D. Bae, Y.J. Kim, J.J. Han, J.S. Kim, P.J. Budden, Ductile tearing simulation of Battelle pipe test using simplified stress-modified fracture strain concept, Fatig. Fract. Eng. Mater. Struct. 39 (2016) 1391-1406, https://doi.org/10.1111/ffe.12456.
- N.H. Kim, C.S. Oh, Y.J. Kim, C.M. Davies, K. Nikbin, D.W. Dean, Creep failure simulations of 316H at 550℃: Part II - effects of specimen geometry and loading mode, Eng. Fract. Mech. 105 (2013) 169-181, https://doi.org/10.1016/j.engfracmech.2013.04.001.
- T. Kobayashi, M. Kinoshita, S. Hattori, T. Ogawa, Y. Tsuboi, M. Ishida, S. Ogawa, H. Saito, Development of the SESAME metallic fuel performance code, Nucl. Tech. 89 (2) (1990) 183-193, https://doi.org/10.13182/NT90-A34345.
- T. Ogata, T. Yokoo, Development and validation of ALFUS: an irradiation behavior analysis code for metallic fast reactor fuels, Nucl. Technol. 128 (1) (1999) 113-123, https://doi.org/10.13182/NT99-A3018.