DOI QR코드

DOI QR Code

Accuracy of CAD-CAM RPD framework according to manufacturing method: A literature review

국소의치 구조물(framework)의 CAD-CAM 제조방식에 따른 정확도: 문헌고찰

  • Yi, Yuseung (Department of Prosthodontics, Seoul National University Dental Hospital)
  • 이유승 (서울대학교치과병원 치과보철과)
  • Received : 2021.03.16
  • Accepted : 2021.06.21
  • Published : 2021.07.31

Abstract

Purpose. The purpose of this study was to evaluate the currently published literatures investigating the accuracy of computer-aided design and computer-aided manufacturing removable partial denture (CAD-CAM RPD) framework with different manufacturing techniques and methods. Materials and methods. A comprehensive search for literatures was conducted in PubMed database using specific keywords with the patient, intervention, comparison, and outcome (PICO) question, "Is there a difference in accuracy of RPD frameworks manufactured using digital workflow according to the manufacturing process and methods?" Results. A total of 7 articles were selected. Two studies compared intraoral scanning and laboratory scanning for RPD frameworks and had heterogenous results. In the studies using different manufacturing process, RPD frameworks had clinically acceptable accuracy in both subtractive and additive manufacturing. Polyetheretherketone (PEEK)-milled RPD frameworks showed higher fit accuracy than traditionally casted or 3D printed RPDs. Direct milling method showed a higher accuracy than indirect milling method. However, in rapid prototyping, indirect method showed higher accuracy than direct method. Conclusion. The RPD frameworks fabricated using CAD-CAM technology showed a clinically acceptable level of accuracy regardless of manufacturing process or techniques. Consistent results have not been reported regarding the digital impression methods, which were intra oral scanning or laboratory scanning, and further studies are needed.

목적: 본 연구의 목적은 CAD-CAM 방식으로 제작한 RPD framework의 제조 과정 및 제작 방법에 따른 적합도를 문헌 고찰을 통해 평가하는 것이다. 재료 및 방법: 다음의 PICO (patient, intervention, comparison, and outcome) 질문과 관련한 특정 키워드를 이용하여 PubMed 데이터베이스 상에서 포괄적인 문헌 검색을 시행하였다: "제조 과정 및 제작 방식에 따라 디지털 RPD framework의 정확도에 차이가 있는가?" 결과: 총 7개의 문헌이 선택되었으며, 이 중 두 문헌에서 구강스캔과 모형스캔을 이용한 디지털 RPD framework의 정확도에 관하여 비교하였으나, 일관된 결과를 얻지 못하였다. 제작 방식에 따른 비교 문헌에서는 적층 가공 또는 절삭 가공을 통해 제작된 RPD framework 모두 임상적으로 허용가능한 수준의 정확도를 보였으며, PEEK (Polyetheretherketone) milling RPD framework가 전통적 주조방식으로 제작하거나 3D 프린팅으로 제작한 RPD framework보다 높은 적합도를 보였다. Milling RPD framework에서는 direct 방식으로 제작한 경우에 indirect 방식의 경우보다 우수한 적합도가 관찰되었으나, 3D 프린팅 RPD framework에서는 indirect 방식으로 제작한 경우에 더 높은 적합도를 보였다. 결론: CAD-CAM 기술을 이용하여 제작된 디지털 RPD framework는 제조 과정이나 방식에 관계없이 임상적으로 허용되는 수준의 정확도를 보였다. 구강스캔 또는 모형스캔의 디지털 인상 채득 방법에 따라서는 일관된 결과가 보고되지 않았으며, 추후 연구가 필요하다.

Keywords

References

  1. Almufleh B, Emami E, Alageel O, de Melo F, Seng F, Caron E, Nader SA, Al-Hashedi A, Albuquerque R, Feine J, Tamimi F. Patient satisfaction with laser-sintered removable partial dentures: A crossover pilot clinical trial. J Prosthet Dent 2018;119:560-7. https://doi.org/10.1016/j.prosdent.2017.04.021
  2. Arnold C, Hey J, Schweyen R, Setz JM. Accuracy of CAD-CAM-fabricated removable partial dentures. J Prosthet Dent 2018;119:586-92. https://doi.org/10.1016/j.prosdent.2017.04.017
  3. Bibb RJ, Eggbeer D, Williams RJ, Woodward A. Trial fitting of a removable partial denture framework made using computer-aided design and rapid prototyping techniques. Proc Inst Mech Eng H 2006;220: 793-7.
  4. Eggbeer D, Bibb R, Williams R. The computer-aided design and rapid prototyping fabrication of removable partial denture frameworks. Proc Inst Mech Eng H 2005;219:195-202. https://doi.org/10.1243/095441105X9372
  5. Dawood A, Marti BM, Sauret-Jackson V, Darwood A. 3D printing in dentistry. Br Dent J 2015;219:521-9. https://doi.org/10.1038/sj.bdj.2015.914
  6. Diwan R, Talic Y, Omar N, Sadig W. Pattern waxes and inaccuracies in fixed and removable partial denture castings. J Prosthet Dent 1997;77: 553-5. https://doi.org/10.1016/S0022-3913(97)70152-5
  7. Viswambaran M, Sundaram RK. Effect of storage time and framework design on the accuracy of maxillary cobalt-chromium cast removable partial dentures. Contemp Clin Dent 2015;6:471-6. https://doi.org/10.4103/0976-237X.169841
  8. Azari A, Nikzad S. The evolution of rapid prototyping in dentistry: a review. Rapid Prototyp J 2009;15:216-25. https://doi.org/10.1108/13552540910961946
  9. Tregerman I, Renne W, Kelly A, Wilson D. Evaluation of removable partial denture frameworks fabricated using 3 different techniques. J Prosthet Dent 2019;122:390-5. https://doi.org/10.1016/j.prosdent.2018.10.013
  10. Ye H, Li X, Wang G, Kang J, Liu Y, Sun Y, Zhou Y. A novel computer-aided design/computer-assisted manufacture method for one-piece removable partial denture and evaluation of fit. Int J Prosthodont 2018;31:149-51. https://doi.org/10.11607/ijp.5508
  11. Soltanzadeh P, Suprono MS, Kattadiyil MT, Goodacre C, Gregorius W. An in vitro investigation of accuracy and fit of conventional and CAD/CAM removable partial denture frameworks. J Prosthodont 2019;28:547-55. https://doi.org/10.1111/jopr.12997
  12. Lee JW, Park JM, Park EJ, Heo SJ, Koak JY, Kim SK. Accuracy of a digital removable partial denture fabricated by casting a rapid prototyped pattern: A clinical study. J Prosthet Dent 2017;118:468-74. https://doi.org/10.1016/j.prosdent.2016.12.007
  13. Bilgin MS, Baytaroglu EN, Erdem A, Dilber E. A review of computer-aided design/computer-aided manufacture techniques for removable denture fabrication. Eur J Dent 2016;10:286-91. https://doi.org/10.4103/1305-7456.178304
  14. Lima JM, Anami LC, Araujo RM, Pavanelli CA. Removable partial dentures: use of rapid prototyping. J Prosthodont 2014;23:588-91. https://doi.org/10.1111/jopr.12154
  15. Ye H, Ning J, Li M, Niu L, Yang J, Sun Y, Zhou Y. Preliminary clinical application of removable partial denture frameworks fabricated using computer-aided design and rapid prototyping techniques. Int J Prosthodont 2017;30:348-53. https://doi.org/10.11607/ijp.5270
  16. Lang LA, Tulunoglu I. A critically appraised topic review of computer-aided design/computer-aided machining of removable partial denture frameworks. Dent Clin North Am 2014;58:247-55. https://doi.org/10.1016/j.cden.2013.09.006
  17. Negm EE, Aboutaleb FA, Alam-Eldein AM. Virtual evaluation of the accuracy of fit and trueness in maxillary poly(etheretherketone) removable partial denture frameworks fabricated by direct and indirect CAD/CAM techniques. J Prosthodont 2019;28: 804-10. https://doi.org/10.1111/jopr.13075
  18. Seelbach P, Brueckel C, Wostmann B. Accuracy of digital and conventional impression techniques and workflow. Clin Oral Investig 2013;17:1759-64. https://doi.org/10.1007/s00784-012-0864-4
  19. Cho SH, Schaefer O, Thompson GA, Guentsch A. Comparison of accuracy and reproducibility of casts made by digital and conventional methods. J Prosthet Dent 2015;113:310-5. https://doi.org/10.1016/j.prosdent.2014.09.027
  20. Patzelt SB, Emmanouilidi A, Stampf S, Strub JR, Att W. Accuracy of full-arch scans using intraoral scanners. Clin Oral Investig 2014;18:1687-94. https://doi.org/10.1007/s00784-013-1132-y
  21. Ender A, Attin T, Mehl A. In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions. J Prosthet Dent 2016; 115:313-20. https://doi.org/10.1016/j.prosdent.2015.09.011
  22. Guth JF, Runkel C, Beuer F, Stimmelmayr M, Edelhoff D, Keul C. Accuracy of five intraoral scanners compared to indirect digitalization. Clin Oral Investig 2017;21:1445-55. https://doi.org/10.1007/s00784-016-1902-4
  23. Hazeveld A, Huddleston Slater JJ, Ren Y. Accuracy and reproducibility of dental replica models reconstructed by different rapid prototyping techniques. Am J Orthod Dentofacial Orthop 2014;145:108-15. https://doi.org/10.1016/j.ajodo.2013.05.011
  24. Revilla-Leon M, Ozcan M. Additive manufacturing technologies used for processing polymers: current status and potential application in prosthetic dentistry. J Prosthodont 2019;28:146-58. https://doi.org/10.1111/jopr.12801
  25. Williams RJ, Bibb R, Rafik T. A technique for fabricating patterns for removable partial denture frameworks using digitized casts and electronic surveying. J Prosthet Dent 2004;91:85-8. https://doi.org/10.1016/j.prosdent.2003.10.002
  26. Wu J, Wang X, Zhao X, Zhang C, Gao B. A study on the fabrication method of removable partial denture framework by computer-aided design and rapid prototyping. Rapid Prototyp J 2012;18:318-23. https://doi.org/10.1108/13552541211231743
  27. Torii M, Nakata T, Takahashi K, Kawamura N, Shimpo H, Ohkubo C. Fitness and retentive force of cobalt-chromium alloy clasps fabricated with repeated laser sintering and milling. J Prosthodont Res 2018;62:342-6. https://doi.org/10.1016/j.jpor.2018.01.001
  28. Torabi K, Farjood E, Hamedani S. Rapid prototyping technologies and their applications in prosthodontics, a review of literature. J Dent (Shiraz) 2015;16:1-9.
  29. Hitzler L, Alifui-Segbaya F, Williams P, Heine B, Heitzmann M, Hall W, Merkel M, Ochsner A. Additive manufacturing of cobalt-based dental alloys: analysis of microstructure and physicomechanical properties. Adv Mater Sci Eng 2018;2018: 1-12.