Acknowledgement
This study was supported by the Regional Leading Research Center of NRF and MOCIE(Grant number: NRF-2019R1A5A8083201).
References
- Noh, M. J., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "System Design for Laser Scanning Unit using A3", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 71-72, 2011.
- Yoo, K. S., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "Injection Molding of a Laser Scanning Unit Optical System", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 102-103, 2011.
- Robert, E., Hopkins and D. Stephenson, Optical Scanning(Marcel Dekker), pp. 27~82, 1991.
- Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 1 1, pp.163~170, 2004.
- Jeong, I. S., Ban, M. S, Son,, K. E., and Lee, B. B, "Development of Ftheta Lens for Laser Scanning Unit", Technology and Innovation, Vol. 1, No. 1, pp. 13~19, 2013.
- Rim, C. S., "The effect analysis of birefringence of plastic f-theta lens on the beam diameter", Korean Journal of the Optics and Photonics, Vol 10, No. 1, pp. 15-20, 1999.
- Bringans, R. D., "Application of Blue Diode Lasers to Printing," Mrs online Proceedings Library(OPL), Vol. 482, pp. 1203, 1997. https://doi.org/10.1557/PROC-482-1203
- Sakuma, N., "Aspherical Surface in the Laser Writing Optics," Optical Design, No. 17, pp. 9-15, 1999.
- Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics," Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993. https://doi.org/10.1364/AO.32.002295
- Minoura, K., "Historical Review and Future Trends of Scanning Optical Systems for Laser Beam Printers," International Society for Optics and Photonics, Vol. 1987, pp. 264-273, 1993.
- Park, K., and Han, C. Y. "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device," Journal of the Korean Society of Precision Engineering, Vol. 21, pp. 163-170, 2004.
- Klepek, G. "Manufacturing optical lens by injection compression molding," Kunststoffe, Vol. 77, pp. 13, 1987.