한국추진공학회지 (Journal of the Korean Society of Propulsion Engineers)

  • 제25권2호
  • /
  • Pages.1-11
  • /
  • 2021
  • /
  • 1226-6027(pISSN)
  • /
  • 2288-4548(eISSN)
한국추진공학회 (The Korean Society of Propulsion Engineers)
권호 표지
DOI QR코드

DOI QR Code

초음속 연소기 내 공동 형상에 따른 유동 특성

Flow Characteristics in a Supersonic Combustor with a Configuration of a Cavity

  • 투고 : 2020.12.28
  • 심사 : 2021.02.24
  • 발행 : 2021.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

연소기 내부의 공동은 낮은 속도의 재순환영역과 유동의 진동을 일으켜 연료와 공기의 혼합 효율을 증대시키고, 화염을 유지함으로써 지속적인 연소를 가능하게 한다. 본 연구에서는 공동의 형상 인자에 따른 내부 유동의 특성을 실험과 2차원 전산해석을 통해 관찰하였다. 초음속 연소기 내 유동은 단순히 L/D 이외에도 다양한 공동 형상인자에 따라 크게 영향을 받는 것이 관찰되었다. 동일 L/D에서도 공동의 깊이에 따라 open과 closed 형태가 나타남을 확인하였고, 공동의 후방 경사각, 연소기 높이도 유동 특성이 달라지며, 이는 전압력 손실에 큰 영향을 미치는 것을 확인하였다.

The cavity inside the combustor increases the mixing efficiency of fuel and air by inducing a oscillation of the flow and the recirculation area with a low speed, and enables continuous combustion by maintaining the flame. In this study, the characteristics of the internal flow by change in the shape parameters of the cavity were analyzed through experiments and two-dimensional computational analysis. It was observed that the flow in the supersonic combustor was greatly influenced by various shape parameters of cavity besides L/D. Even with the same L/D, it was confirmed that the flow type varies depending on the depth of the cavity, either open or closed type, and the aft ramp angle of the cavity and the height of the combustor also affect the flow characteristics. As a result, the change in the shape parameters of the cavity had a great influence on the total pressure loss.

키워드

과제정보

이 논문은 2017학년도 인하대학교의 지원(56743-01)에 의하여 연구되었습니다.

참고문헌

  1. Choubey, G., Devarajan, Y., Huang, W., Mehar, K., Tiwari, M. and Pandey, K.M., "Recent Advances in Cavity-based Scramjet Engine-a Brief Review," International Journal of Hydrogen Energy, Vol. 44, No. 26, pp. 13895-13909, 2019. https://doi.org/10.1016/j.ijhydene.2019.04.003
  2. Yakar, A.B. and Hanson, R.K., "Cavity Flame-holders for Ignition and Flame Stabilization in Scramjet: An Overview," Journal of Propulsion and Power, Vol. 17, pp. 869-877, 2001. https://doi.org/10.2514/2.5818
  3. Palharini, R.C., Scanlon, T.J. and White, C., "Chemically Reacting Hypersonic Flows over 3D Cavities: Flowfield Structure Characterisation," Computers and Fluids, Vol. 165, pp. 173-187, 2018. https://doi.org/10.1016/j.compfluid.2018.01.029
  4. Baysal, O. and Stallings Jr, R.L., "Computational and Experimental Investigation of Cavity Flowfields," AIAA Journal, Vol. 26, No. 1, pp. 6-7, 1988. https://doi.org/10.2514/3.9842
  5. Das, R., Kim, H.D. and Kurian, J., "Experimental Study of Supersonic Entrainment Using a Cavity," Journal of Propulsion and Power, Vol. 30, No. 5, pp. 1143-1151, 2014. https://doi.org/10.2514/1.B35047
  6. Kumar, M. and Vaidyanathan, A., "On Shock Train Interaction with Cavity Oscillations in a Confined Supersonic Flow," Experimental Thermal and Fluid Science, Vol. 90, pp. 260-274, 2018. https://doi.org/10.1016/j.expthermflusci.2017.08.009
  7. Moradi, R., Mahyari, A., Gerdroodbary, M. B., Abdollahi, A. and Amini, Y., "Shape Effect of Cavity Flameholder on Mixing Zone of Hydrogen Jet at Supersonic Flow," International Journal of Hydrogen Energy, Vol. 43, No. 33, pp. 16364-16372, 2018. https://doi.org/10.1016/j.ijhydene.2018.06.166
  8. Gruber, M.R., "Fundamental Studies of Cavity-based Flameholder Concepts for Supersonic Combustors," Journal of Propulsion and Power, Vol. 17, No. 1, pp. 146-153, 2001. https://doi.org/10.2514/2.5720
  9. Maurya, P.K., Rajeev, C., RR, V.K. and Vaidyanathan, A., "Effect of Aft Wall Offset and Ramp on Pressure Oscillation from Confined Supersonic Flow over Cavity," Experimental Thermal and Fluid Science Vol. 68, pp. 559-573, 2015. https://doi.org/10.1016/j.expthermflusci.2015.06.014
  10. Jialing, J. and Liu, W., "Recent Progress in our Scramjet Research," 17th International Symposium on Air Breathing Engines, Munich, Germany, ISABE-2005-1009, Sep. 2005.
  11. Shi, D., Song, W., Wang, Y. and Wang, Y., "Effects of Cavity Configurations on Flameholding and Performances of Kerosene Fueled Scramjet Combustor," International Journal of Turbo & Jet-Engines, Vol. 34, No. 3, pp. 211-220, 2017
  12. Shin, S.S., Jeong, J.C., Suryan, A. and Kim, H.D., "A Study on the Reduction of Supersonic Cavity Pressure Oscillations Using a Sub-Cavity System," The Journal of the Korean Society of Propulsion Engineers, Vol. 13, No. 5, pp. 41-47, 2009.
  13. Jin, S., Choi, H., Lee, H.J., Byun, J., Bae, J. and Park, D., "Combustion Characteristics Based on Injector Shape of Supersonic Combustor," The Journal of the Korean Society of Propulsion Engineers, Vol. 23, No. 5, pp. 76-87, 2019. https://doi.org/10.6108/KSPE.2019.23.3.076
  14. Yang, I., Lee, Y., Kim, Y. and Lee, K., "Combustion Test of a Mach 5 Scramjet Engine Model," The Journal of the Korean Society of Propulsion Engineers, Vol. 17, No. 3, pp. 9-14, 2013. https://doi.org/10.6108/KSPE.2013.17.3.009
  15. Hwang, S.W. and Rho, O.H., "Numerical Simulation of Unsteady Supersonic Viscous Flow over a Cavity," The Journal of the Korean Society of Propulsion Engineers, Vol. 21, No. 3, pp. 14-24, 1993.
  16. Chang, K., Park, O. and Choi, H., "Numerical Analysis and Control of Open Cavity Flow," The Journal of the Korean Society of Propulsion Engineers, Vol. 30, No. 3, pp. 101-108, 2002.
  17. Won, S., Jeong, E., Jeung, I. and Choi, J., "Combustion Characteristics of Hypersonic Scramjet Engine," The Journal of the Korean Society of Propulsion Engineers, Vol. 8, No. 1, pp. 61-69, 2004.
  18. Seo, H., Jeong, H., Lee, J. and Byun, Y., "A Study of the Mixing Characteristics for Cavity Sizes in Scramjet Engine Combustor," Journal of the Korean Physical Society, Vol. 55, No. 5, pp. 2180-2186, 2009. https://doi.org/10.3938/jkps.55.2180
  19. Oh, J., Seo, H., Byun, Y.H. and Lee, J., "Mixing Characteristics of Various Cavity Shapes in SCRamjet Engine," The Journal of the Korean Society of Propulsion Engineers, Vol. 12, No. 1, pp. 57-53, 2008.