DOI QR코드

DOI QR Code

Multi-objective optimization of mixed convection air cooling in an inclined channel with discrete heat sources

  • Bensouici, Moumtez (Department of Science and Technology, Institute of Sciences and Technology, University Center of Mila) ;
  • Azizi, Mohamed Walid (Department of Science and Technology, Institute of Sciences and Technology, University Center of Mila) ;
  • Bensouici, Fatima Zohra (Faculty of Pharmaceutical Process Engineering, University of Constantine 3)
  • 투고 : 2020.10.23
  • 심사 : 2021.05.12
  • 발행 : 2021.07.10

초록

In this paper, a multi-objective optimization of mixed convection air-cooling of two identical discrete heat sources mounted in an inclined channel is conducted to obtain the optimal design parameters, using Response Surface Methodology (RSM) and desirability function approach. Reynolds number (Re), inclination of the channel (𝛾) and the width of the discrete heat source (b) are selected as the input parameters. The computational simulations are done for different Reynolds numbers (25≤Re≤250), inclination angles of the channel (0°≤𝛾≤ 360°) and the width of the heat source (5≤b≤10 mm). A central composite design (CCD), which comes under the RSM approach, with design parameters was used for analysis of variance (ANOVA). A second-order regression models were developed to correlate the design parameters (Re, 𝛾 and b) with mean Nusselt number (Nu) and maximum temperature (TMax). The optimum values of design parameters produce the lowest value of maximum temperature (TMax) with a higher mean Nusselt number (Nu) are Reynolds number (Re)=209.94, inclination angle of the channel (𝛾)=330° and heat source width (b)=5.13 mm.

키워드

참고문헌

  1. Azizi, M.W., Keblouti, O., Boulanouar, L. and Yallese, M.A. (2020), "Design optimization in hard turning of E19 alloy steel by analysing surface roughness, tool vibration and productivity", Struct. Eng. Mech., 73(5), 501-513. https://doi.org/10.12989/sem.2020.73.5.501.
  2. Bejan, A. (1994), Entropy Generation through Heat and Fluid Flow, John Wiley & Sons.
  3. Bensouici, M. and Bensouici, F.Z. (2017), "Entropy generation and optimization of laminar forced convection Air Cooling in a horizontal channel containing heated sources", J. Appl. Fluid Mech., 10(3), 819-831. https://doi.org/10.18869/acadpub.jafm.73.240.26847.
  4. Bensouici, M. and Bessaih, R. (2010), "Mixed convection in a vertical channel with discrete heat sources using a porous matrix", Numer. Heat Transf. A, 58, 581-604. https://doi.org/10.1080/10407782.2010.516684.
  5. Bessaih, R. and Kadja, M. (2000), "Turbulent natural convection cooling of electronic components mounted on a vertical channel", Appl. Therm. Eng., 20(2), 141-154. https://doi.org/10.1016/S1359-4311(99)00010-1.
  6. Bhowmik, H., Tso, C.P., Tou, K.W. and Tan, F.L. (2005), "Convection heat transfer from discrete heat sources in a liquid cooled rectangular channel", Appl. Therm. Eng., 25, 2532-2542. https://doi.org/10.1016/j.applthermaleng.2004.11.022.
  7. Boutina, L. and Bessaih, R. (2011), "Numerical simulation of mixed convection air-cooling of electronic components mounted in an inclined channel", Appl. Therm. Eng., 31, 2052- 2062. https://doi.org/10.1016/j.applthermaleng.2011.03.021.
  8. Bouziane, A., Boulanouar, L., Azizi, M.W. and Keblouti, O. (2018), "Analysis of cutting forces and roughness during hard turning of bearing steel", Struct. Eng. Mech., 66(3), 285-294. https://doi.org/10.12989/sem.2018.66.3.285.
  9. Box, G.E.P. and Wilson, K. (1951), "On the experimental attainment of optimum conditions", J. Roy. Stat. Soc., 13, 1-45. https://doi.org/10.1111/j.1467-9884.1963.tb01587.x
  10. Cengel, Y.A. (2008), Introduction to Thermodynamics and Heat Transfer, Second Edition: Property Tables and Charts (SI units), The McGraw-Hill Companies.
  11. Choi, C.Y. and Ortega, A. (1993), "Mixed convection in an inclined channel with a discrete heat source", J. Heat Mass Transf., 36, 3119-3134. https://doi.org/10.1016/0017-9310(93)90040-D.
  12. Damavandi, M.D., Forouzanmehr, M. and Safikhani, H. (2017), "Modeling and Pareto based multi-objective optimization of wavy fin-and-elliptical tube heat exchangers using CFD and NSGA-II algorithm", Appl. Therm. Eng., 111, 325-339. https://doi.org/10.1016/j.applthermaleng.2016.09.120.
  13. Derringer, G. and Suich, R. (1980), "Simultaneous optimization of several response variables", J. Qual. Eng., 12, 214-219. https://doi.org/10.1080/00224065.
  14. Esfe, M.H., Arani, A.A.A., Niroumand, A.H., Yan, W.M. and Karimipour, A. (2015), "Mixed convection heat transfer from surface-mounted block heat sources in a horizontal channel with nanofluids", Int. J. Heat Mass Transf., 89, 783-791. https://doi.org/10.1016/j.ijheatmasstransfer.2015.05.100.
  15. Guimares, P.M. and Menon, G.J. (2008), "Combined free and forced convection in an inclined channel with discrete heat sources", Int. Comm. Heat Mass Transf., 35, 1267-1274. https://doi.org/10.1016/j.icheatmasstransfer.2008.08.006.
  16. Hamouche, A. and Bessaih, R. (2009), "Mixed convection air cooling of protruding heat sources mounted in a horizontal channel", Int. Comm. Heat Mass Transf., 36, 841-849. https://doi.org/10.1016/j.icheatmasstransfer.2009.04.009.
  17. Han, H., Yu, R., Li, B. and Zhang, Y. (2019), "Multi-objective optimization of corrugated tube inserted with multi-channel twisted tape using RSM and NSGA-II", Appl. Therm. Eng., 159, 113-731. https://doi.org/10.1016/j.applthermaleng.2019.113731
  18. Harrington, J.E. (1965), "The desirability function", Indus. Qual. Control, 21, 494-498.
  19. Hotta, T.K. and Venkateshan, S.P. (2012), "Natural and mixed convection heat transfer cooling of discrete heat sources placed near the bottom on a PCB", Proc. World Acad. Sci. Eng. Technol., 6(8), 1446-1453. https://doi.org/doi/10.5281/zenodo.1073038.
  20. Hotta, T.K., Balaji, C. and Venkateshan, S.P. (2015), "Experiment driven ANN-GA based technique for optimal distribution of discrete heat sources under mixed convection", Exp. Heat Transf., 28(3), 298-315. https://doi.org/10.1080/08916152.2013.871867.
  21. Icoz, T. and Jaluria, Y. (2004), "Design of cooling systems for electronic equipment using both experimental and numerical inputs", J. Elect. Pack., 126, 465-471. https://doi.org/10.1115/1.1827262.
  22. Icoz, T., Verma, N. and Jaluria, Y. (2006), "Design of air and liquid cooling systems for electronic components using concurrent simulation and experiment", A. J. Heat Transfer., 128,.466-478. https://doi.org/10.1115/1.2353284.
  23. Karvinkoppa, M.V. and Hotta, T.K. (2017), "Numerical investigation of natural and mixed convection heat transfer on optimal distribution of discrete heat sources mounted on a substrate", IOP Conf. Ser.: Mater. Sci. Eng., 263(6), 062066. https://doi.org/10.1088/1757-899X/263/6/062066.
  24. Keblouti, O., Boulanouar, L., Azizi, M.W. and Bouziane, A. (2019), "Multi response optimization of surface roughness in hard turning with coated carbide tool based on cutting parameters and tool vibration", Struct. Eng. Mech., 70(4), 395-405. https://doi.org/10.12989/sem.2019.70.4.395.
  25. Laouche, N., Korichi, A., Popa, C.V. and Polidori, G. (2017), "Laminar aiding and opposing mixed convection in laminar aiding and opposing mixed convection in a vertical channel with an asymmetric discrete heating at one wall", Therm. Sci. Int. J., l21, 2503-2515. https://doi.org/10.2298/TSCI160105149L.
  26. Mathew, V.K. and Hotta, T.K. (2018), "Numerical investigation on optimal arrangement of IC chips mounted on a SMPS board cooled under mixed convection", Therm. Sci. Eng. Prog., 7, 221-229. https://doi.org/doi/10.1016/j. tsep.2018.06.010.
  27. Mathew, V.K. and Hotta, T.K. (2020), "Investigation of substrate board orientation effect on the optimal distribution of IC chips under forced convection", Exp. Heat Transf., 1-22. https://doi.org/10.1080/08916152.2020.1793827.
  28. Mohapatra, T., Sahoo, S.S. and Padhi, B.N. (2019), "Analysis, prediction and multi-response optimization of heat transfer characteristics of a three fluid heat exchanger using Response Surface Methodology and Desirability Function Approach", Appl. Therm. Eng., 151, 536-555. https://doi.org/10.1016/j.applthermaleng.2019.02.001.
  29. Montgomery, D.C. (2001), Design and Analysis of Experiments, John Wiley & Sons, New York.
  30. Myers R.H. and Montgomery, D.C. (1995), Response Surface Methodology: Process and Product Optimization Using Designed Experiments, John Wiley and Sons, Inc., New York.
  31. Myers, R.H. and Montgomery, D.C. (2002), Response Surface Methodology: Process and Product.
  32. Pordanjani, A.H., Vahedi, S.M., Rikhtegar, F. and Wongwises, S. (2019), "Optimization and sensitivity analysis of magneto-hydrodynamic natural convection nanofluid flow inside a square enclosure using response surface methodology", J. Therm. Anal. Calorim., 135, 1031-1045. https://doi.org/10.1007/s10973-018-7652-6.
  33. Sekrani, G., Poncet S. and Proulx, P. (2015), "Mixed Conjugated heat transfer and entropy generation of Al2O3-water nanofluid flows over a heated wall-mounted obstacle", J. Therm. Anal. Calorim., 135(2), 963-979. https://doi.org/10.1007/s10973-018-7349-x.