References
- K. H. Kang, "Design Guideline with the Structural Analysis of the Press Die for Stamping an Auto-part with Ultra High Strength Steel of 1.5GPa UTS-grade", M. S. Thesis, Graduate School, Daegu University, Gyeongbuk, Korea, 2015.
- Kwon Ku Kwan, "Prediction of springback through the coupled analysis of forming process and tool deformation", Kangwon National University, 2019.
- O. S. Seo, E. G. Lee, S. M. Hong, S. C. Choi, S.Y. Ryu, M. G. Lee, Heon Young Kim., "Prediction of Springback for Al alloy sheet using Yoshida-Uemori model", The Korean Society For Technology of Plasticity, Vol. 2012 No. 5 pp. 219-222, 2012.
- Kwak, Jung-Hwan, Jung, Chul-Young, Kim, Se-Ho, Song, Jung-Han. Springback tendency with the variable blank holding force in the drawing process of the UHSS, 12(3), pp. 60-65, 2018.
- N. Kardes, Y. Demiralp, G. Sukumaran, C. Choi, H. Kim, J. Gonzalez-Mendez, N. Agarwal, M. Deshpande, and T. Al tan, "Control of Springback and Di mensional Tolerances in Forming of Advanced High Strength Steel (AHSS) Parts, Part I: Load-Unload Tensile Test and V-Die Bending", Report CPF/1.4/10/01, Center for Precision Forming, The Ohio State University, 2010.
- YANG, Xi, et al. Prediction of springback in air-bending of Advanced High Strength steel (DP780) considering Young s modulus variation and with a piecewise hardening function. International Journal of Mechanical Sciences, 105: pp. 266-272, 2016. https://doi.org/10.1016/j.ijmecsci.2015.11.028
- LEE, Dong-Hwan; HAN, Seong-Ryeol; LEE, Chun-Kyu. Analytical evaluation and study on the springback according to the cross sectional form of 1.2 GPa ultra high strength steel plate. Journal of the Korea Society of Die & Mold Engineering, 13.4: pp. 17-22, 2019.
- K. Yilamu, R. Hino, H. Hamasaki, F. Yoshida, "Bauschinger Effect on Springback of Clad Sheet Metals in Draw Bending", MATERIALS TRANSACTIONS, Volume 51, Issue 7, pp. 1364-1366, 2010. https://doi.org/10.2320/matertrans.M2010058
- Hutte, H.:"Untersuchungen zum Ruckfederungsverhalten hochfester Stahlblechwerkstoffe beim Tiefziehen", Dissertation Universitat Hannover, 2001.
- S. J. Moon, M. G. Lee, Y. T. Keum, "Experimental Drawbead Dies for Measuring Drawbead Forces", Transactions of Materials Processing, 17(7), pp. 511-516, 2008. https://doi.org/10.5228/KSPP.2008.17.7.511
- S-H Kim, "Press Die Design Engineering", Daekwang Surim, 2013.
- Y. S. Kwon, H. W. Bae, B. W. Kang, J. H. Kwak, S. H. Kim, J. W. Park, Y. S. Kim, J. K. Park, "Effects of the Friction and Draw-bead Shape on the Springback Amount in the U-draw Bending Process", The Korean Society For Technology of Plasticity, Vol. 2016 No.10 pp. 209-209, 2016.