References
- F. M. Mahdi, R. N. Razooqi and S. S. Irhayyim, Tikrit J. Eng. Sci., 24, 47 (2017). https://doi.org/10.25130/tjes.24.2017.31
- S. S. Irhayyim, R. N. Razooqi, K. H. Razej and A. T. Abdulhameed, Tikrit J. Pure Sci., 23, 12 (2018).
- A. D. Mahdi, S. S. Irhayyim and S. F. Abduljabbar, Mater. Sci. Forum, 1002, 151 (2020).
- S. S. Irhayyim, H. S. Hammood and M. M. Meteab, Mater. Today Proc., 20, 548 (2020).
- R. Casati and M. Vedani, Metals (Basel)., 4, 65 (2014). https://doi.org/10.3390/met4010065
- M. Meignanamoorthy and M. Ravichandran, Mech. Mechanical Eng., 22, 65 (2018). https://doi.org/10.2478/mme-2018-0007
- H. S. Hammood, A. S. Mahmood and S. S. Irhayyim, Period. Eng. Nat. Sci., 7, 1318 (2019). https://doi.org/10.21533/pen.v7i3.730
- S. S. Irhayyim, Diyala J. Eng. Sci., 4, 72 (2017).
- A. R. Ahmed, S. S. Irhayyim and H. S. Hammood, IOP Conf. Ser. Mater. Sci. Eng., 454, 012036 (2018).
- S. Sivasankaran, K. R. Ramkumar, F. A. Al-Mufadi and O. M. Irfan, Met. Mater. Int., 27, 1 (2019).
- E. Omrani, A. D. Moghadam, P. L. Menezes and P. K. Rohatgi, Int. J. Adv. Manuf. Technol., 83, 325 (2016). https://doi.org/10.1007/s00170-015-7528-x
- S. S. Irhayyim, S. Ahmed and A. A. Annaz, Mater. Res. Express, 6, 105071 (2019). https://doi.org/10.1088/2053-1591/ab3b21
- A. A. Annaz, S. S. Irhayyim, M. L. Hamada and H. S. Hammood, AIMS Mater. Sci., 7, 534 (2020). https://doi.org/10.3934/matersci.2020.5.534
- S. S. Irhayyim, H. S. Hammood and A. D. Mahdi, AIMS Mater. Sci., 7, 103 (2020). https://doi.org/10.3934/matersci.2020.1.103
- S. S. Irhayyim, H. S. Hammood and H. A. Abdulhadi, AIMS Mater. Sci., 6, 1124 (2019). https://doi.org/10.3934/matersci.2019.6.1124
- A. U. Prajapati, A. J. H. Patel, K. V. Patel, P. P. Patel, P. P. Bhatt and S. O. Varma, IOSR J. Mech. Civ. Eng., 13, 72 (2016).
- H. Abdizadeh, R. Ebrahimifard and M. A. Baghchesara, Compos. Part B Eng., 56, 217 (2014). https://doi.org/10.1016/j.compositesb.2013.08.023
- M. R. Mattli, R. A. Shakoor, P. R. Matli and A. M. A. Mohamed, Metals (Basel)., 9, 414 (2019). https://doi.org/10.3390/met9040414
- F. M. Mahdi and A. U. A. Annaz, Sulaimania J. Eng. Sci., 2, 55 (2015). https://doi.org/10.17656/sjes.100024
- A. Khaqani, B. H. Dawood, N. M. Ali and O. Ihsan, J. Mech. Eng. Res. Dev., 43, 415 (2020).
- M. L. Hamada, Tikrit J. Eng. Sci., 26, 1 (2019). https://doi.org/10.25130/tjes.26.3.01
- American Society for Testing and Materials, Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes' Principle (ASTM B962-08), (2008).
- J. R. Cahoon, W. H. Broughton and A. R. Kutzak, Metall. Trans., 2, 1979 (1971). https://doi.org/10.1007/BF02913433
- D. I. Adebiyi, Mater. Des., 74, 67 (2015). https://doi.org/10.1016/j.matdes.2015.02.010
- C. Ujah, P. Popoola, O. Popoola and V. Aigbodion, J. Compos. Mater., 53, 3775 (2019). https://doi.org/10.1177/0021998319848055
- C. O. Ujah, O. M. Popoola and V. S. Aigbodion, Int. J. Adv. Manuf. Technol., 7, 2961 (2020).
- W. D. Callister and D. G. Rethwisch, Materials Science and Engineering: an Introduction, 10th ed., p. 163, Wiley, New York (2018).
- American Society for Testing and Materials, Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus (ASTM G99 - 05), (2012).
- H. S. Hammood, S. S. Irhayyim, A. Y. Awad and H. A. Abdulhadi, Int. J. Automot. Mech. Eng., 17, 7570 (2020). https://doi.org/10.15282/ijame.17.1.2020.06.0561