References
- C. H. Lee, "Entire-spray mixing characteristics over time after the start of the injection using an image-processing technique for high-speed captured images of CR-DI fuel sprays", ARPN Journal of Engineering and Applied Sciences, Vol. 14, No. 3, 2019, pp. 587~595.
- H. Hiroyasu, "Diesel Engine Combustion and its Modeling", COMODIA85, 1985, pp. 53~75.
- H. Hiroyasu, T. Kadota and M. Arai, "Supp. Comments: Fuel Spray Characterization in Diesel Engines", in J. N. Mattavi and C. A. Amann (eds.), Combustion Modeling in Reciprocating Engines, 1985, pp. 369~408.
- R. J. H. Klein-Douwel, P. J. M. Frijters, L. M. T. Somers, W. A. de Boer and R. S. G. Baert, "Macroscopic diesel fuel spray shadowgraphy using high speed digital imaging in a high pressure cell", Fuel, Vol. 86, 2007, pp. 1994~2007. https://doi.org/10.1016/j.fuel.2006.11.039
- F. Pischinger, "Development Work on a Combustion System for Vehicle Diesel Engines", in FISITA Congress, 1962.
- G. Tippelmann, "A New Method of Investigation of Swirl Ports", 1977, SAE paper 770404.
- M. L. Monaghan and H. F. Pettifer, "Air Motion and Its Effect on Diesel Performance an Emissions", 1981, SAE paper 810255.
- Vafidis, "Influence on Air Flow in a Four-Stroke Model Engine", Proc. Instn. Mech. Engrs, Vol. 198C, No. 8, 1984, pp. 71~97.
- C. Arcoumanis, A. F. Bicen and J. H. Whitelaw, "Squissh and Swirl-Squish Interaction in Motored Model Engines", Journal of Fluids Engineering, Vol. 105, 1983, pp. 105~112. https://doi.org/10.1115/1.3240925
- J. M. Desantes, J. V. Benajes and M. Lapuerta, "Intake Port Pipes Evaluation: Comparison between Paddle Wheel and Hot-Wire Anemometry Method", Proc. Instn. Mech. Engrs., Vol. 203A, 1989, pp. 105~111.
- H. Bensler, L. Kapitza, J. Raposo and U. Reisch, "A New Experimental Method for Determining Port Generated Swirl Flow", 2002, SAE paper 2002-01-2846.
- K. I. Kim and C. H. Lee, "Development of a new swirl measurement method for an engine cylinder head by automating the swirl measuring process", Proc. IMechE, Part D: J. Automobile Engineering, Vol. 223, 2009, pp. 375~387.
- Henrik W. R. Dembinski and Hans-Erik Angstrom, "Optical study of swirl during combustion in a CI engine with different injection pressures and swirl ratios compared with calculations", 2012, SAE paper 2012-01-0682.
- K-W Nam, W-N Kim, W-G Lee, "CFD based Diesel Engine Intake Port Development", KSAE 2013 Annual Conference, 2013, KSAE13-A0073.
- F. Perini, K. Zha, S. Busch, and P. Miles and R. D. Reitz, "Principal Component Analysis and Study of Port-Induced Swirl Structures in a Light-Duty Optical Diesel Engine", 2015, SAE paper 2015-01-1696.
- F. Payri, J. Benajes, X. Margot, A. Gil, "CFD modeling of the in-cylinder flow in direct-injection Diesel engines", Computers & Fluids, Vol. 33, 2004, pp. 995~1021. https://doi.org/10.1016/j.compfluid.2003.09.003
- J. Liu, X. Xia, Y. Wang, H. Yang, "Development of a Fast Response High Accuracy Virtual Air Flow Meter for Internal Combustion Engine Applications", 2011 Third International Conference on Measuring Technology and Mechatronics Automation, IEEE computer society, 2011, pp. 1037~1041.
- T. Morel and R. Keribar, "A model for predicting spatially and time resolved convective heat transfer in bowl-in-piston combustion chambers", 1985, SAE paper 850204.
- T. Uzkan, C. Borgnakke and T. Morel, "Characterization of Flow Produed by a High Swirl Inlet Port", 1983, SAE paper 830266.