Current Photovoltaic Research

Korea Photovoltaic Society (한국태양광발전학회)
권호 표지
DOI QR코드

DOI QR Code

Surface Treatment to Inhibit Water-induced Decomposition and δ-phase Formation of Perovskite Thin Films

수분에 의한 페로브스카이트 박막의 분해 및 δ-phase 결정 형성을 억제하기 위한 표면 처리 기술

  • Son, Kyung Nan (Graduate School of Energy Science and Technology, Chungnam National University) ;
  • Naqvi, Syed Dildar Haider (Photovoltaics Research Department, Renewable Energy Institute, Korea Institute of Energy Research) ;
  • Jeong, In Young (Photovoltaics Research Department, Renewable Energy Institute, Korea Institute of Energy Research) ;
  • Ahn, SeJin (Photovoltaics Research Department, Renewable Energy Institute, Korea Institute of Energy Research) ;
  • Chang, Hyo Sik (Graduate School of Energy Science and Technology, Chungnam National University)
  • 손경난 (신에너지소재전공, 에너지과학기술대학원, 충남대학교) ;
  • ;
  • 정인영 (태양광연구단, 재생에너지연구소, 한국에너지기술연구원) ;
  • 안세진 (태양광연구단, 재생에너지연구소, 한국에너지기술연구원) ;
  • 장효식 (신에너지소재전공, 에너지과학기술대학원, 충남대학교)
  • Received : 2021.03.09
  • Accepted : 2021.05.10
  • Published : 2021.06.30
Download PDF
⟨ Previous Next ⟩

Abstract

Perovskite solar cells (PSCs) are currently attracting attention as a promising source of photovoltaic power generation for their rapid increase in efficiency within a short research period. However, the 2-step deposition method, which has been considered as a proper film fabrication route in commercialization point of view of PSC, requires a complicated control of environment to achieve high efficiency because each step of the process are affected by humidity in different manner. It is clearly a large hurdle for this technic to be transferred to industrialization. In this study, we developed a simple surface treatment by which high quality perovskite films can be fabricated through 2-step deposition method in a relatively wide humidity range without complicated humidity control at each step.

Keywords

Acknowledgement

본 연구는 한국에너지기술연구원 주요사업(C1-2402) 및 한도외 사업(C1-2403)의 지원으로 수행되었습니다.

References

  1. "Best Research-Cell Efficiency Chart | Photovoltaic Research | NREL," https://www.nrel.gov/pv/cell-efficiency.html (accessed Mar. 08, 2021).
  2. S. Xiao, K. Zhang, S. Zheng, and S. Yang, "Good or evil: What is the role of water in crystallization of organometal halide perovskites?," Nanoscale Horizons, Vol. 5, No. 8, pp. 1147-1154, 2020. https://doi.org/10.1039/D0NH00270D
  3. K. Shoyama, W. Sato, Y. Guo, E. Nakamura, "Effects of water on the forward and backward conversions of lead(II) iodide to methylammonium lead perovskite," J. Mater. Chem. A, Vol. 5, No. 45, pp. 23815-23821, 2017. https://doi.org/10.1039/C7TA08042E
  4. J. Huang, S. Tan, P. D. Lund, H. Zhou, "Impact of H2O on organic-inorganic hybrid perovskite solar cells," Energy Environ. Sci., Vol. 10, No. 11, pp. 2284-2311, 2017. https://doi.org/10.1039/c7ee01674c
  5. J. Robinson et al., "Effects of ambient humidity on the optimum annealing time of mixed-halide Perovskite solar cells," J. Phys. Energy, Vol. 2, pp. 0-31, 2020.
  6. C. H. Chiang, M. K. Nazeeruddin, M. Gratzel, C. G. Wu, "The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells," Energy Environ. Sci., Vol. 10, No. 3, pp. 808-817, 2017. https://doi.org/10.1039/c6ee03586h
  7. P. Zhu et al., "Simultaneous Contact and Grain-Boundary Passivation in Planar Perovskite Solar Cells Using SnO2-KCl Composite Electron Transport Layer," Adv. Energy Mater., Vol. 10, No. 3, pp. 1-7, 2020.
  8. Y. Zhao et al., "Perovskite seeding growth of formamidinium-lead-iodide-based perovskites for efficient and stable solar cells," Nat. Commun., Vol. 9, No. 1, pp. 1-10, 2018. https://doi.org/10.1038/s41467-017-02088-w
  9. Q. Jiang et al., "Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%," Adv. Mater., Vol. 29, No. 46, pp. 1-7, 2017.
  10. Y. Zhao et al., "A Polymerization-Assisted Grain Growth Strategy for Efficient and Stable Perovskite Solar Cells," Adv. Mater., Vol. 32, No. 17, pp. 1-8, 2020.
  11. J. Zhang et al., "Two-step sequential blade-coating of high quality perovskite layers for efficient solar cells and modules," J. Mater. Chem. A, Vol. 8, No. 17, pp. 8447-8454, 2020. https://doi.org/10.1039/d0ta02043e
  12. C. Xin et al., "Defects Healing in Two-Step Deposited Perovskite Solar Cells via Formamidinium Iodide Compensation," ACS Appl. Energy Mater., Vol. 3, No. 4, pp. 3318-3327, 2020. https://doi.org/10.1021/acsaem.9b02336
  13. J. Cao et al., "Alkali-cation-enhanced benzylammonium passivation for efficient and stable perovskite solar cells fabricated through sequential deposition," J. Mater. Chem. A, Vol. 8, No. 37, pp. 19357-19366, 2020. https://doi.org/10.1039/D0TA04680A
  14. Y. Cui et al., "Correlating Hysteresis and Stability with Organic Cation Composition in the Two-Step Solution-Processed Perovskite Solar Cells," ACS Appl. Mater. Interfaces, Vol. 12, No. 9, pp. 10588-10596, 2020. https://doi.org/10.1021/acsami.9b23374
  15. Q. Jiang et al., "Surface passivation of perovskite film for efficient solar cells," Nat. Photonics, Vol. 13, No. 7, pp. 460-466, 2019. https://doi.org/10.1038/s41566-019-0398-2
  16. Y. Cheng et al., "18% High-Efficiency Air-Processed Perovskite Solar Cells Made in a Humid Atmosphere of 70% RH," Sol. RRL, Vol. 1, No. 9, pp. 1-8, 2017.
  17. Q. Tai et al., "Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity," Nat. Commun., Vol. 7, pp. 1-8, 2016.
  18. K. Zhang et al., "A prenucleation strategy for ambient fabrication of perovskite solar cells with high device performance uniformity," Nat. Commun., Vol. 11, No. 1, pp. 1-11, 2020. https://doi.org/10.1038/s41467-019-13993-7
  19. F. Ma, J. Li, W. Li, N. Lin, L. Wang, J. Qiao, "Stable α/δ phase junction of formamidinium lead iodide perovskites for enhanced near-infrared emission," Chem. Sci., Vol. 8, No. 1, pp. 800-805, 2016. https://doi.org/10.1039/C6SC03542F
  20. Z. Chen, H. Zhang, F. Yao, C. Tao, G. Fang, G. Li, "Room Temperature Formation of Semiconductor Grade α-FAPbI3 Films for Efficient Perovskite Solar Cells," Cell Reports Phys. Sci., Vol. 1, No. 9, 100205, 2020. https://doi.org/10.1016/j.xcrp.2020.100205
  21. Y. Zhang, S. G. Kim, D. K. Lee, N. G. Park, "CH3NH3PbI3 and HC(NH2)2PbI3 Powders Synthesized from Low-Grade PbI2: Single Precursor for High-Efficiency Perovskite Solar Cells," ChemSusChem, Vol. 11, No. 11, pp. 1813-1823, 2018. https://doi.org/10.1002/cssc.201800610
  22. C. De Blasi, S. Galassini, C. Manfredotti, G. Micocci, L. Ruggiero, A. Tepore, "Trapping levels in PbI2," Solid State Commun., Vol. 25, No. 3, pp. 149-153, 1978. https://doi.org/10.1016/0038-1098(78)91467-9
  23. C. J. Tong, L. Li, L. M. Liu, O. V. Prezhdo, "Long Carrier Lifetimes in PbI2-Rich Perovskites Rationalized by Ab Initio Nonadiabatic Molecular Dynamics," ACS Energy Lett., Vol. 3, No. 8, pp. 1868-1874, 2018. https://doi.org/10.1021/acsenergylett.8b00961
  24. F. Jiang et al., "Synergistic Effect of PbI2 Passivation and Chlorine Inclusion Yielding High Open-Circuit Voltage Exceeding 1.15 V in Both Mesoscopic and Inverted Planar CH3NH3PbI3 (Cl)-Based Perovskite Solar Cells," Adv. Funct. Mater., Vol. 26, No. 44, pp. 8119-8127, 2016. https://doi.org/10.1002/adfm.201603968
  25. Q. Jiang et al., "Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2 PbI3-based perovskite solar cells," Nat. Energy, Vol. 2, No. 1, pp. 1-7, 2017.
  26. B. wook Park et al., "Understanding how excess lead iodide precursor improves halide perovskite solar cell performance," Nat. Commun., Vol. 9, No. 1, pp. 1-8, 2018. https://doi.org/10.1038/s41467-017-02088-w
  27. P. Cui et al., "Planar p-n homojunction perovskite solar cells with efficiency exceeding 21.3%," Nat. Energy, Vol. 4, No. 2, pp. 150-159, 2019. https://doi.org/10.1038/s41560-018-0324-8
  28. Y. Chen et al., "Mechanism of PbI2 in Situ Passivated Perovskite Films for Enhancing the Performance of Perovskite Solar Cells," ACS Appl. Mater. Interfaces, Vol. 11, No. 47, pp. 44101-44108, 2019. https://doi.org/10.1021/acsami.9b13648
  29. D. Barrit et al., "Room-Temperature Partial Conversion of α-FAPbI3 Perovskite Phase via PbI2 Solvation Enables High-Performance Solar Cells," Adv. Funct. Mater., Vol. 30, No. 11, pp. 1-10, 2020.
  30. A. Ariyarit, R. Yoshikawa, I. Takenaka, F. Gillot, S. Shiratori, "Improvement of the dynamic spin-washing effect with an optimized process of a perovskite solar cell in ambient air by the Kriging method," Ind. Eng. Chem. Res., Vol. 56, No. 39, pp. 11142-11150, 2017. https://doi.org/10.1021/acs.iecr.7b02515
  31. J. Koo, T. Kim, C. Jung, J. Lee, T. Kim, "Effects of water and iso-propyl alcohol relative humidities on single wafer cleaning system performance," Int. J. Heat Mass Transf., Vol. 50, No. 21-22, pp. 4275-4285, 2007. https://doi.org/10.1016/j.ijheatmasstransfer.2007.02.043