DOI QR코드

DOI QR Code

Bridge health monitoring in the United States: A review

  • Rizzo, Piervincenzo (Department of Civil and Environmental Engineering, University of Pittsburgh) ;
  • Enshaeian, Alireza (Laboratory for Nondestructive Evaluation and Structural Health Monitoring Studies, Department of Civil and Environmental Engineering, University of Pittsburgh)
  • Received : 2020.08.05
  • Accepted : 2020.11.12
  • Published : 2021.03.25

Abstract

The assessment of bridges' health has become a relevant component of the maintenance paradigm especially in those countries in which many structures are rated in poor condition and/or are over 50 years old. Additionally, the permanent monitoring of bridges helps engineers in validating the design prediction of bridge structural response to external loads. With more than 600,000 highway bridges, 46.4% of which rated as fair and 7.6% rated in poor condition, United States is one of those countries in which the installation of reliable bridge health monitoring systems is strategically necessary to minimize and optimize repair and rehabilitation costs and to minimize the risk of failures. In this paper, a thorough review of the scientific literature on structural health monitoring systems installed in U.S. bridges over the last 20 years is presented. This review aims to offer interested readers a holistic perspective of recent and current state-of-the-art bridge health monitoring systems and to extract a "general paradigm" that is common to many real structures. The review, conducted through a comprehensive search of peer-reviewed documents available in the scientific literature, discusses more than sixty bridges in terms of the instrumentation used, scope of the monitoring, and main outcomes. Overall, it was found that the monitoring systems provide a valuable tool to compare the structural responses predicted using analytical or numerical tools with the real response of the given structures. Owing to the relative short time span of the monitoring period, most of the monitoring systems did not flag any serious structural flaws that required the closure of the bridge monitored.

Keywords

Acknowledgement

The authors acknowledge the support of the Pennsylvania Department of Transportation (PennDOT) under the Work Order-003 titled "Data Management, Mining, and Inference for Bridge Monitoring". The initial contribution of Dr. Max Stephens and Miss Qianyun (Gloria) Zhang is acknowledged. The use of the results or reliance on the material presented is the responsibility of the reader. The contents of this document are not meant to represent standards and are not intended for use as a reference in specifications, contracts, regulations, statutes, or any other legal document. The opinions and interpretations expressed are those of the authors and other duly referenced sources. The views and findings reported herein are solely those of the writers and not necessarily those of PennDOT. This paper does not constitute a standard, a specification, or regulations.

References

  1. Adams, D. (2007), Health Monitoring of Structural Materials and Components: Methods with Applications, John Wiley & Sons.
  2. Agdas, D., Rice, J.A., Martinez, J.R. and Lasa, I.R. (2015), "Comparison of visual inspection and structural-health monitoring as bridge condition assessment methods", J. Perform. Constr. Facil., 30(3), 04015049. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000802
  3. Ahlborn, T.M., Shuchman, R., Sutter, L.L., Brooks, C.N., Harris, D.K., Burns, J.W., Endsley, K.A., Evans, D.C., Vaghefi, K. and Oats, R.C. (2010), "The state-of-the-practice of modern structural health monitoring for bridges: A comprehensive review", Technical Report for Contract No. DTOS59-10-H-00001; Michigan Technological University, MI, USA. https://trid.trb.org/view/1101239
  4. Aktan, A.E., Catbas, F.N., Grimmelsman, K.A. and Pervizpour, M. (2002), "Development of a model health monitoring guide for major bridges", Technical Report for Contract No. DTFH61-01-P-00347; Federal Highway Administration Research, Development and Drexel intelligent infrastructure and transportation safety institute, pp. 183-230.
  5. Alder, T.S., Halling, M.W. and Barr, P.J. (2018), "Installation of embedded accelerometers in precast girders for the Nibley Utah Bridge", Report No. CAIT-UTC-NC34; Rutgers University, Bridge Diagnostic Instruments, U.S. Department of Transportation Federal Highway Administration.
  6. Al-Khateeb, H.T., Shenton III, H.W., Chajes, M.J. and Aloupis, C. (2019), "Structural health monitoring of a cable-stayed bridge using regularly conducted diagnostic load tests", Front. Built Environ., 5(41). https://doi.org/10.3389/fbuil.2019.00041
  7. Aono, K., Hasni H., Pochettino O., Lajnef, N. and Chakrabartty, S. (2019), "Quasi-self-powered piezo-floating-gate sensing technology for continuous monitoring of large-scale bridges", Front. Built Environ., 5(29). https://doi.org/10.3389/fbuil.2019.00029
  8. Babanajad, S., Moon, F., Braley, J., Ansari, F., Norouzzadeh, E., Taylor, T., Roy, S. and Maher, A. (2020), "Structural health monitoring of representative cracks in the Manhattan bridge", Report No. CAIT-UTC-NC61; Rutgers University, New York City (NYC), Department of Transportation.
  9. Barr, P.J., Woodward, C.B., Najera, B. and Amin, M.N. (2006), "Long-term structural health monitoring of the San Ysidro Bridge", J. Perform. Constr. Facil., 20(1), 14-20. https://doi.org/10.1061/(ASCE)0887-3828(2006)20:1(14)
  10. Barr, P.J., Petroff, S.M., Hodson, D.J., Thurgood, T.P. and Halling, M.W. (2012), "Baseline testing and long-term monitoring of the Lambert Road Bridge for the long-term bridge performance program", J. Civil Struct. Health Monitor., 2(2), 123-135. https://doi.org/10.1007/s13349-012-0023-2
  11. Betti, R., Khazem, D., Carlos, M., Gostautas, R. and Virmani, Y. (2014), "Corrosion monitoring research for city of New York bridges", Report No. FHWA-HRT-14-023; U.S. Department of Transportation.
  12. Betti, R., Sloane, M.J.D., Khazem, D. and Gatti, C. (2016), "Monitoring the structural health of main cables of suspension bridges", J. Civ. Struct. Health Monitor., 6(3), 355-363. https://doi.org/10.1007/s13349-016-0165-8
  13. Campbell Scientific (2020a), Delaware River: Bridge Health - Campbell gear used in structural-health monitoring system for the Burlington-Bristol Bridge, Campbell Scientific, Inc., Logan, USA. www.campbellsci.com/delaware-river-bridge
  14. Campbell Scientific (2020b), Oregon: Monitoring Bridge Stress and Strain - Campbell Scientific system monitors thermal loading effects on bridge tie girders, Campbell Scientific, Inc., Logan, USA. www.campbellsci.com/fremont-bridge
  15. Campbell Scientific (2020c), Oregon: Bridge Lift Span Performance - Campbell CR1000 dataloggers monitor lift span and counterweight system, Campbell Scientific, Inc., Logan, USA. www.campbellsci.com/i5-bridge
  16. CANARY Systems (2020), https://canarysystems.com/pdfs/canary_pp20.pdf
  17. Catbas, F.N. and Malekzadeh, M. (2016), "A machine learning-based algorithm for processing massive data collected from the mechanical components of movable bridges", Autom. Constr., 72(3), 269-278. https://doi.org/10.1016/j.autcon.2016.02.008
  18. F.N., Susoy, M. and Frangopol, D.M. (2008), "Structural health monitoring and reliability estimation: Long span truss bridge application with environmental monitoring data", Eng. Struct., 30(9), 2347-2359. https://doi.org/10.1016/j.engstruct.2008.01.013
  19. Catbas, F.N., Gul, M., Zaurin, R., Gokce, H.B., Terrell, T., Dumlupinar, T. and Maier, D. (2010), "Long term bridge maintenance monitoring demonstration on a movable bridge: A framework for structural health monitoring of movable bridges", Technical Report for Contract No. BD548-23; University of Central Florida, Orlando, FL, USA. https://trid.trb.org/view/927119
  20. Catbas, F.N., Gokce, H.B. and Gul, M. (2012), "Nonparametric analysis of structural health monitoring data for identification and localization of changes: Concept, lab, and real-life studies", Struct. Health Monitor., 11(5), 613-626. https://doi.org/10.1177/1475921712451955
  21. Cawley, P. (2018), "Structural health monitoring: Closing the gap between research and industrial deployment", Struct. Health Monitor., 17(5), 1225-1244. https://doi.org/10.1177/1475921717750047
  22. Chang, M. and Pakzad, S.N. (2013), "Modified natural excitation technique for stochastic modal identification", J. Struct. Eng., 139(10), 1753-1762. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000559
  23. Chang, M., Pakzad, S.N. and Schanck, C. (2011), "Framework for comparison study of stochastic modal identification considering accuracy and efficiency", Struct. Health Monitor.
  24. Chen, G., Yan, D., Wang, W., Zheng, M., Ge, L. and Liu, F. (2007), "Assessment of the Bill Emerson memorial cable-stayed bridge based on seismic instrumentation data", Technical Report No. OR08-003; Center for Infrastructure, Missouri University of Science and Technology, Rolla, MO, USA. https://scholarsmine.mst.edu/civarc_enveng_facwork/957/
  25. Chen, J.G., Adams, T.M., Sun, H., Bell, E.S. and Buyukozturk, O. (2018), "Camera-based vibration measurement of the world war I memorial bridge in Portsmouth, New Hampshire", J. Struct. Eng., 144(11), 04018207. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002203
  26. Connor, R.J. and Fisher, J.W. (2001), "Report on Field Inspection, Assessment, and Analysis of Floorbeam Connection Cracking on the Birmingham Bridge-Pittsburgh PA", Report No. 02-10; Lehigh University, Bethlehem, PA, USA.
  27. Connor, R.J., Fisher, J.W., Hodgson, I.C. and Bowman, C.A. (2004), "Results of field monitoring prototype floorbeam connection retrofit details on the Birmingham Bridge", Report No. 04-04; Lehigh University, Bethlehem, PA, USA.
  28. Connor, R.J., Hodgson, I.C., Mahmoud, H. and Bowman, C. (2005), "Field Testing and Fatigue Evaluation of the I-79 Bridge over the Ohio River", Report No. 05-02; Lehigh University, Bethlehem, PA, USA.
  29. Conte, J., He, X., Moaveni, B., Masri, S.F., Caffrey, J.P., Wahbeh, M., Tasbihgoo, F., Whang, D.H. and Elgamal, A. (2008), "Dynamic testing of Alfred Zampa memorial bridge", J. Struct. Eng., 134(6), 1006-1015. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:6(1006)
  30. Christenson, R.E. and Motaref, S. (2016), "Dual Purpose Bridge Health Monitoring and Weigh-in-Motion (BWIM): Phase I", Report No. CT-2265-F-15-7; University of Connecticut, Mansfield, CT, USA.
  31. Dalia, Z.M., Bagchi, S., Sabamehr, A., Bagchi, A. and Bhowmick, A. (2018), "Life cycle cost-benefit analysis of SHM of I-35 W St. Anthony Falls bridge", In: International Symposium on Structural Health Monitoring and Nondestructive Testing, Saarbruecken, Germany, October.
  32. De Roeck, G., Degrande, G., Lombaert, G. and Muller, G. (2011), "Examples of Vibration-Based Bridge Structural-Identification for Management", Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011, Leuven, Belgium, July.
  33. Dong, Y., Song, R. and Liu, H. (2010), "Bridges Structural Health Monitoring and Deterioration Detection-Synthesis of Knowledge and Technology", Report No. 309036; Alaska Department of Transportation and Public Facilities, University of Alaska, Fairbanks, AK, USA.
  34. Faridazar, F. (2019), "Toward Self-Diagnosing Bridges", Public Roads, 82(4).
  35. Farrar, C.R. and Worden, K. (2007), "An introduction to structural health monitoring", Phil. Trans. R. Soc. A., 365, 303-315. https://doi.org/10.1098/rsta.2006.1928
  36. Farrar, C.R. and Worden, K. (2012), Structural Health Monitoring: A Machine Learning Perspective, John Wiley & Sons.
  37. Federal Highway Administration (2019a), https://www.fhwa.dot.gov/bridge/nbi/ascii.cfm
  38. Federal Highway Administration (2019b), https://www.fhwa.dot.gov/bridge/britab.cfm#def
  39. Federal Highway Administration (2019c), https://www.fhwa.dot.gov/bridge/fc.cfm
  40. Feng, M.Q. (2019), "A Novel Vision Sensor for Remote Measurement of Bridge Displacement", Report No. NCHRP IDEA Project 189; Columbia University, New York, NY, USA.
  41. Feng, D. and Feng, M.Q. (2017), "Experimental validation of cost-effective vision-based structural health monitoring", Mech. Syst. Signal Process., 88, 199-211. https://doi.org/10.1016/j.ymssp.2016.11.021
  42. Foust, N. (2014), "Statistical Models of the Lambert Road Bridge: Changes in Natural Frequencies due to Temperature", Master of Science Thesis; Utah State University, Logan, UT, USA.
  43. Foust, N.R., Halling, M.W. and Barr, P.J. (2014), "Statistical models of a concrete bridge: changes in modal parameters due to temperature", In: Structures Congress, Boston, MA, USA, April. https://doi.org/10.1061/9780784413357.184
  44. French, C.E., Hedegaard, B., Shield, C.K. and Stolarski, H. (2011), "I35W Collapse, Rebuild, and Structural Health Monitoring - Challenges Associated with Structural Health Monitoring of Bridge Systems", Proceedings of the 18th International Conference on Positron Annihilation, FL, USA, August.
  45. French, C.E.W., Shield, C.K., Stolarski, H.K., Hedegaard, B.D. and Jilk, B.J. (2012), "Instrumentation, Monitoring, and Modeling of the I-35W Bridge", Report No. MN/RC 2012-24; Minnesota Department of Transportation, Minneapolis, MN, USA.
  46. French, C.E.W., Shield, C.K. and Hedegaard, B.D. (2014), "Modeling and monitoring the long-term behavior of post-tensioned concrete bridges", Report No. MN/RC 2014-39; Minnesota Department of Transportation, Minneapolis, MN, USA.
  47. Furkan, M.O., Mao, Q., Livadiotis, S., Mazzotti, M., Aktan, A.E., Sumitro, S.P. and Bartoli, I. (2020), "Towards rapid and robust measurements of highway structures deformation using a wireless sensing system derived from wired sensors", J. Civil Struct. Health Monitor., 10, 297-311. https://doi.org/10.1007/s13349-020-00385-5
  48. Gaebler, K.O., Hedegaard, B.D., Shield, C.K. and Linderman, L.E. (2018), "Signal selection and analysis methodology of long-term vibration data from the I-35W St. Anthony Falls Bridge", Struct. Control Health Monitor., 25(7), e2182. https://doi.org/10.1002/stc.2182
  49. GEOKON (2020), Bridges, New Hampshire, USA. https://www.geokon.com/Bridges
  50. Glisic, B. (2018), "Long-term evaluation of prestress losses in concrete bridges using long-gauge fiber optic sensors", Report No. CAIT-UTC-NC-48; Princeton University, Princeton, NJ, USA.
  51. Guan, H., Karbhari, V.M. and Sikorsky, C.S. (2006), "Web-based structural health monitoring of an FRP composite bridge", Computer-Aided Civil Infrastruct. Eng., 21(1), 39-56. https://doi.org/10.1111/j.1467-8667.2005.00415.x
  52. Guan, H., Karbhari, V.M. and Sikorsky, C.S. (2007), "Long-term structural health monitoring system for a FRP composite highway bridge structure", J. Intell. Mate. Syst. Struct., 18(8), 809-823. https://doi.org/10.1177/1045389X06073471
  53. Guo, T. and Chen, Y.W. (2011), "Field stress/displacement monitoring and fatigue reliability assessment of retrofitted steel bridge details", Eng. Fail. Anal., 18(1), 354-363. https://doi.org/10.1016/j.engfailanal.2010.09.014
  54. Guo, T., Frangopol, D.M. and Chen, Y. (2012), "Fatigue reliability assessment of steel bridge details integrating weigh-in-motion data and probabilistic finite element analysis", Comput. Struct., 112, 245-257. https://doi.org/10.1016/j.compstruc.2012.09.002
  55. Halling, M.W. and Petty, T. (2001), "Strong Motion Instrumentation of I-15 Bridge C-846", Report No. UT-01-12; Research and Development Division, The Utah Department of Transportation, Taylorsville, UT, USA.
  56. Harik, I. and Peiris, A. (2013), "Case Studies of Structural Health Monitoring of Bridges", In: Nondestructive Testing of Materials and Structures, RILEM Bookseries, 6, 1007-1013, Springer, Dordrecht, Netherlands.
  57. Hartnagel, B.A., O'Connor, J., Yen, W.H., Clogston, P. and Celebi, M. (2006), "Planning and implementation of a seismic monitoring system for the Bill Emerson Memorial Bridge in Cape Girardeau, MO", Proceedings of Structures Congress 2006: Structural Engineering and Public Safety, St. Louis, MO, USA, May.
  58. He, X., Moaveni, B., Conte, J.P., Elgamal, A. and Masri, S.F. (2008), "Modal identification study of Vincent Thomas Bridge using simulated wind-induced ambient vibration data", Computer-Aided Civil Infrastruct. Eng., 23(5), 373-388. https://doi.org/10.1111/j.1467-8667.2008.00544.x
  59. He, X., Moaveni, B., Conte, J.P., Elgamal, A. and Masri, S.F. (2009), "System identification of Alfred Zampa Memorial Bridge using dynamic field test data", J. Struct. Eng., 135(1), 54-66. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:1(54)
  60. Hedegaard, B.D., French, C.E., Shield, C.K., Stolarski, H.K. and Jilk, B.J. (2013), "Instrumentation and modeling of I-35W St. Anthony Falls bridge", J. Bridge Eng., 18(6), 476-485. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000384
  61. Hedegaard, B.D., French, C.E. and Shield, C.K. (2017a), "Time-dependent monitoring and modeling of I-35W St. Anthony Falls Bridge. I: Analysis of monitoring data", J. Bridge Eng., 22(7), 04017025. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001053
  62. Hedegaard, B.D., French, C.E. and Shield, C.K. (2017b), "Long-term monitoring strategy for timedependent deflections of posttensioned concrete bridges", J. Bridge Eng., 22(11), 04017095. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001139
  63. Helmicki, A. and Hunt, V. (2013), "Instrumentation of the US grant bridge for monitoring of fabrication, erection, in-service behavior, and to support management, maintenance, and inspection", Report No. FHWA/OH-2013/23; Office of Statewide Planning and Research, The Ohio Department of Transportation, Columbus, OH, USA.
  64. Hong, A.L., Ubertini, F. and Betti, R. (2011), "Wind analysis of a suspension bridge: Identification and finite element model simulation", J. Struct. Eng., 137(1), 133-142. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000279
  65. Hooks, J.M. and Weidner, J. (2016), "Long-Term Bridge Performance Program Protocols, Version 1", Report No. FHWA-HRT-16-007; Office of Infrastructure Research and Development, Turner-Fairbank Highway Research Center, McLean, VA, USA.
  66. Hou, R., Jeong, S., Lynch, J.P. and Law, K.H. (2020a), "Cyber-physical system architecture for automating the mapping of truck loads to bridge behavior using computer vision in connected highway corridors", Transp. Res. Part C: Emerg. Technol., 111, 547-571. https://doi.org/10.1016/j.trc.2019.11.024
  67. Hou, R., Lynch, J.P., Ettouney, M.M. and Jansson, P.O. (2020b), "Partial composite-action and durability assessment of slab-on-girder highway bridge decks in negative bending using long-term structural monitoring data", J. Eng. Mech., 146(4), 04020010. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001725
  68. Hunt, B.E. (2009), Monitoring Scour Critical Bridges, National Academies of Sciences, Engineering, and Medicine, Washington, DC, USA.
  69. IIS (2020), https://www.iisengineering.com/projects/structural-health-monitoring-of-septas-crum-creek-viaduct/
  70. IIS Inc. (2020), http://www.iis-system.com/media/Applications$20SHM.pdf
  71. Inaudi, D., Bolster, M., Deblois, R., French, C., Phipps, A., Sebasky, J. and Western, K. (2009), "Structural health monitoring system for the new I-35W St Anthony Falls Bridge", Proceedings of the 4th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII-4), Zurich, Switzerland, July.
  72. Kachlakev, D.I. and McCurry, D.D. (2000), "Testing of Full-Size Reinforced Concrete Beams Strengthened with FRP Composites: Experimental Results and Design Methods Verification", Report No. FHWA-ORRD-00-19; Oregon Department of Transportation and Federal Highway Administration, OR, USA.
  73. Kachlakev, D.I., Miller, T., Yim, S., Chansawat, K. and Potisuk, T. (2001), "Finite Element Modeling of Concrete Structures Strengthened with FRP Laminates", Report No. FHWA-OR-RD-01-17; Oregon Department of Transportation and Federal Highway Administration, OR, USA.
  74. Karbhari, V.M. and Ansari, F. (2009), Structural Health Monitoring of Civil Infrastructure Systems, Woodhead Publishing, Elsevier.
  75. Kaspar, K.E. (2018), "A Protocol for Using Long-Term Structural Health Monitoring Data to Detect and Localize Damage in Bridges", Master of Science Theses, University of New Hampshire, Durham, England.
  76. Khuc, T. and Catbas, F.N. (2018), "Structural identification using computer vision-based bridge health monitoring", J. Struct. Eng., 144(2), 04017202. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001925
  77. Kleinhans, D.D. (2009), "Structural Monitoring for the Huey P. Long Bridge Widening Project", AREMA 2009 Annual Conference & Exposition, Chicago, Illinois, September. https://www.arema.org/files/library/2009_Conference_Proceedings/Structural_Monitoring_for_The_Huey_P_Long_Bridge_Widening_Project.pdf
  78. Kulcu, E., Qin, X., Barrish, R. and Aktan, A. (2000), "Information technology and data management issues for health monitoring of the Commodore Barry Bridge", Proceedings of SPIE's 5th Annual International Symposium on Nondestructive Evaluation and Health Monitoring of Aging Infrastructure, Newport Beach, CA, USA, June. https://doi.org/10.1117/12.387801
  79. Kurata, M., Kim, J., Lynch, J.P., van der Linden, G.W., Sedarat, H., Thometz, E., Hipley, P. and Sheng, L.-H. (2013), "Internet-enabled wireless structural monitoring systems: Development and permanent deployment at the New Carquinez suspension bridge", J. Struct. Eng., 139(10), 1688-1702. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000609
  80. Kwon, K. and Frangopol, D.M. (2010), "Bridge fatigue reliability assessment using probability density functions of equivalent stress range based on field monitoring data", Int. J. Fatigue, 32(8), 1221-1232. https://doi.org/10.1016/j.ijfatigue.2010.01.002
  81. Jin, C., Li, J., Jang, S., Sun, X. and Christenson, R. (2015), "Structural damage detection for in-service highway bridge under operational and environmental variability", Proceedings Volume 9435, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, San Diego, CA, USA, March.
  82. Jin, C., Jang, S., Sun, X., Li, J. and Christenson, R. (2016), "Damage detection of a highway bridge under severe temperature changes using extended Kalman filter trained neural network", J. Civil Struct. Health Monitor., 6(3), 545-560. https://doi.org/10.1007/s13349-016-0173-8
  83. Jo, H., Sim, S.-H., Nagayama, T. and Spencer Jr., B.F. (2012), "Development and application of highsensitivity wireless smart sensors for decentralized stochastic modal identification", J. Eng. Mech., 138(6), 683-694. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000352
  84. Land, R., Murugesh, G. and Raghavendrachar, M. (2003), "Assessing Bridge Performance-When, What, and How", Technical Memorandum of Public Works Research Institute. https://www.pwri.go.jp/eng/ujnr/tc/g/pdf/19/7-2land.pdf.
  85. Lee, L.S.W. (2005), "Monitoring and service life estimation of reinforced concrete bridge decks rehabilitated with externally bonded carbon fiber reinforced polymer (CFRP) composites", Ph.D. Dissertation; University of California, San Diego, CA, USA.
  86. Lee, L.S., Karbhari, V.M. and Sikorsky, C. (2007), "Structural health monitoring of CFRP strengthened bridge decks using ambient vibrations", Struct. Health Monitor., 6(3), 199-214. https://doi.org/10.1177/1475921707081109
  87. Liang, Y.J. and Chen, W. (2014), "Bridge fatigue life prediction using Mittag-Leffler distribution", Fatigue Fract. Eng. Mater. Struct., 37(3), 255-264. https://doi.org/10.1111/ffe.12110
  88. Liu, M., Frangopol, D.M. and Kim, S. (2009), "Bridge system performance assessment from structural health monitoring: A case study", J. Struct. Eng., 135(6), 733-742. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000014
  89. Lobo-Aguilar, S., Zhang, Z., Jiang, Z. and Christenson, R. (2019), "Infrasound-based noncontact sensing for bridge structural health monitoring", J. Bridge Eng., 24(5), 04019033. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001385
  90. Lu, P., Phares, B.M., Greimann, L.F. and Wipf, T.J. (2010), "Bridge structural health monitoring system using statistical control chart analysis", Transport. Res. Rec.: J. Transport. Res. Board., 2172(1), 123-131. https://doi.org/10.3141/2172-14
  91. Luo, L., Feng, M.Q. and Wu, Z.Y. (2018), "Robust vision sensor for multi-point displacement monitoring of bridges in the field", Eng. Struct., 163, 255-266. https://doi.org/10.1016/j.engstruct.2018.02.014
  92. Maguire, M. (2013), "Transverse and longitudinal bending of segmental concrete box girder bridges", Ph.D. Dissertation; Virginia Tech, Blacksburg, VA, USA.
  93. Maguire, M., Roberts-Wollmann, C. and Cousins, T. (2018), "Live-load testing and long-term monitoring of the Varina-Enon bridge: investigating thermal distress", J. Bridge Eng., 23(3), 04018003. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001200
  94. Mahmoud, H.N., Connor, R.J. and Bowman, C.A. (2005), "Results of the fatigue evaluation and field monitoring of the I-39 Northbound Bridge over the Wisconsin River", Report No. 05-04; Lehigh University, Bethlehem, PA, USA.
  95. Mahmoud, H.N., Hodgson, I.C. and Bowman, C.A. (2006), "Instrumentation, Field Testing, and Fatigue Evaluation of Selected Approach Spans of the Throgs Neck Bridge (TN82) over the East River, New York", Report No. 06-17; Lehigh University, Bethlehem, PA, USA.
  96. McNeil, S., Lee, E., Li, Y., Chiquoine, R., Heaslip, K. and Herning, G. (2019), "COLLABORATIVE PROPOSAL: The Connection between State of Good Repair and Resilience: Measures for Pavements and Bridges", Report No. CAIT-UTC-NC45; Department of Civil and Environmental Engineering, University of Delaware, Newark, DE, USA.
  97. Mehrabi, A.B. and Farhangdoust, S. (2018), "A laser-based noncontact vibration technique for health monitoring of structural cables: background, success, and new developments", Adv. Acoust. Vib., 2018. https://doi.org/10.1155/2018/8640674
  98. Modares, M. and Waksmanski, N. (2013), "Overview of structural health monitoring for steel bridges", Pract. Period. Struct. Des. Constr., 18(3), 187-191. https://doi.org/10.1061/(ASCE)SC.1943-5576.0000154
  99. Moreu, F., Jo, H., Li, J., Kim, R.E., Cho, S., Kimmle, A., Scola, S., Le, H., Spencer Jr, B.F. and LaFave, J.M. (2015), "Dynamic assessment of timber railroad bridges using displacements", J. Bridge Eng., 20(10), 04014114. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000726
  100. Moreu, F., Li, J., Jo, H., Kim, R.E., Scola, S., Spencer Jr, B.F. and LaFave, J.M. (2016), "Reference-free displacements for condition assessment of timber railroad bridges", J. Bridge Eng., 21(2), 04015052. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000805
  101. Moreu, F., Li, X., Li, S. and Zhang, D. (2018), "Technical specifications of structural health monitoring for highway bridges: new Chinese structural health monitoring code", Front. Built Environ., 4, p. 10. https://doi.org/10.3389/fbuil.2018.00010
  102. Moreno-Gomez, A., Perez-Ramirez, C.A., Dominguez-Gonzalez, A., Valtierra-Rodriguez, M., Chavez-Alegria, O. and Amezquita-Sanchez, J.P. (2018), "Sensors used in structural health monitoring", Arch. Comput. Methods Eng., 25(4), 901-918. https://doi.org/10.1007/s11831-017-9217-4
  103. Nagarajaiah, S. and Erazo, K. (2016), "Structural monitoring and identification of civil infrastructure in the United States", Struct. Monit. Maint., Int. J., 3(1), 51-69. https://doi.org/10.12989/smm.2016.3.1.051
  104. Napolitano, R., Liu, Z., Sun, C. and Glisic, B. (2019), "Combination of image-based documentation and augmented reality for structural health monitoring and building pathology", Front. Built Environ., 5, p. 50. https://doi.org/10.3389/fbuil.2019.00050
  105. Natalicchio, C. (2018), "Model calibration of the Indian River Inlet Bridge using structural health monitoring strain data", Ph.D. Dissertation; University of Delaware, Newark, DE, USA.
  106. Nichols, G. (2017), "Statistical Models of I-15 Bridge C-846: Changes in Natural Frequencies due to Temperature", Master of Science Thesis; Utah State University, Logan, UT, USA.
  107. Nichols, G.A., Halling, M.W. and Barr, P.J. (2018), "Installation of Thermocouples, and Analysis of Temperature Data from the 21st South Bridge", Report No. CAIT-UTC-NC33; Utah State University, Logan, UT, USA.
  108. Norouzi, M., Zhang, F., Hunt, V. and Helmicki, A.J. (2014), "Structural Health Monitor of the US Grant Bridge (Data Patterns)", NDE/NDT for Structural Materials Technology for Highway and Bridges, Washington, DC, USA, August.
  109. O'Connor, S.M., Zhang, Y., Lynch, J.P., Ettouney, M.M. and Jansson, P.O. (2017), "Long-term performance assessment of the Telegraph Road Bridge using a permanent wireless monitoring system and automated statistical process control analytics", Struct. Infrastruct. Eng., 13(5), 604-624. https://doi.org/10.1080/15732479.2016.1171883
  110. Orcesi, A. and Frangopol, D. (2011), "Optimization of Bridge Maintenance Strategies Based on Structural Health Monitoring Information", Struct. Saf., 33(1), 26-41. https://doi.org/10.1016/j.strusafe.2010.05.002
  111. Orsak, J. (2019), "A New Method for Detecting the Onset of Scour and Managing Scour Critical Bridges", Report No. DOT/FRA/ORD-19/32; US Department of Transportation, Federal Railroad Administration.
  112. Pace, J.M., Barr, P.J., Powelson, P. and Mountain Plains Consortium (2019), Prestress Losses and Development of Short-term Data Acquisition System for Bridge Monitoring (No. MPC-19-387), Mountain Plains Consortium.
  113. Pakzad, S.N. (2010), "Development and deployment of large scale wireless sensor network on a long-span bridge", Smart Struct. Syst., Int. J., 6(5-6), 525-543. https://doi.org/10.12989/sss.2010.6.5_6.525
  114. Pakzad, S.N. and Fenves, G.L. (2009), "Statistical analysis of vibration modes of a suspension bridge using spatially dense wireless sensor network", J. Struct. Eng., 135(7), 863-872. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000033
  115. Pakzad, S.N., Fenves, G.L., Kim, S. and Culler, D.E. (2008), "Design and implementation of scalable wireless sensor network for structural monitoring", J. Infrastruct. Syst., 14(1), 89-101. https://doi.org/10.1061/(ASCE)1076-0342(2008)14:1(89)
  116. Peiris, A., Sun, C. and Harik, I. (2018), "Lessons learned from six different structural health monitoring systems on highway bridges", J. Low Freq. Noise, Vib. Act. Control, 39(3), 616-630. https://doi.org/10.1177/1461348418815406
  117. Phares, B.M., Wipf, T.J., Greimann, L.F., Wood, D.L., Lee, Y.S. and Doornink, J.D. (2007), "Evaluation of steel bridges (volume II): structural health monitoring system for secondary road bridges", Report No. IHRB Project TR-493; Center for Transportation Research and Education, Iowa State University, Ames, IA, USA.
  118. Pines, D. and Aktan, A.E. (2002), "Status of structural health monitoring of long-span bridges in the United States", Prog. Struct. Eng. Mater., 4(4), 372-380. https://doi.org/10.1002/pse.129
  119. Pure Technologies (2020), https://puretechltd.com/case-studies/texas-dept-transportation-fred-hartman-bridge/
  120. Robertson, I.N. (2005), "Prediction of vertical deflections for a long-span prestressed concrete bridge structure", Eng. Struct., 27(12), 1820-1827. https://doi.org/10.1016/j.engstruct.2005.05.013
  121. Sanayei, M., Phelps, J.E., Sipple, J.D., Bell, E.S. and Brenner, B.R. (2012), "Instrumentation, nondestructive testing, and finite-element model updating for bridge evaluation using strain measurements", J. Bridge Eng., 17(1), 130-138. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000228
  122. Santini Bell, E., Sipple, J.D., Lefebvre, P., Phelps, J., Brenner, B. and Sanayei, M. (2010), "Instrumentation, Modeling, and Monitoring of a Concrete Bridge from Construction Through Service", Transportation Research Board 89th Annual Meeting, Washington, DC, USA, January.
  123. Santini Bell, E., Lefebvre, P.J., Sanayei, M., Brenner, B., Sipple, J.D. and Peddle, J. (2013), "Objective load rating of a steel-girder bridge using structural modeling and health monitoring", J. Struct. Eng., 139(10), 1771-1779. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000599
  124. Schenewerk, M.S., Harris, R.S. and Stowell, J. (2006), "Structural health monitoring using GPS", Bridges, 9(2), 01036035.
  125. Schultz, A.E., Morton, D.L., Tillmann, A.S., Campos, J.E., Thompson, D.J., Lee-Norris, A.J. and Ballard, R.M. (2014), "Acoustic Emission Monitoring of a Fracture-Critical Bridge", Report No. MN/RC 2014-15; University of Minnesota, Minneapolis, MN, USA.
  126. Sen, D., Erazo, K., Zhang, W., Nagarajaiah, S. and Sun, L. (2019), "On the effectiveness of principal component analysis for decoupling structural damage and environmental effects in bridge structures", J. Sound Vib., 457, 280-298. https://doi.org/10.1016/j.jsv.2019.06.003
  127. Seo, J., Phares, B., Lu, P., Wipf, T. and Dahlberg, J. (2013), "Bridge rating protocol using ambient trucks through structural health monitoring system", Eng. Struct., 46, 569-580. https://doi.org/10.1016/j.engstruct.2012.08.012
  128. Shahsavari, V., Mashayekhizadeh, M., Mehrkash, M. and Santini-Bell, E. (2019), "Diagnostic testing of a vertical lift truss bridge for model verification and decision-making support", Front. Built Environ., 5, p. 92. https://doi.org/10.3389/fbuil.2019.00092
  129. Shahsavari, V., Mehrkash, M. and Santini-Bell, E. (2020), "Damage detection and decreased load-carrying capacity assessment of a vertical-lift steel truss bridge", J. Perform. Constr. Facil., 34(2), 04019123. https://doi.org/10.1061/(ASCE)CF.19r43-5509.0001400
  130. Sharyatpanahi, S.B.G. (2015), "Structural health monitoring of bridges using wireless sensor networks" Master of Science Thesis; New Jersey Institute of Technology, Newark, NJ, USA. https://digitalcommons.njit.edu/theses/231/
  131. Shenton III, H.W., Chajes, M.J., Wenczel, G. and Cardinal, J. (2013), "Inaugural Load Test of the Charles W. Cullen Bridge at Indian River Inlet", Report No. DCT 238; Center for Innovative Bridge Engineering, University of Delaware, Newark, DE, USA.
  132. Shenton III, H.W., Chajes, M.J., Wenczel, G. and Al-Khateeb, H.T. (2016), "Load Tests of the Charles W. Cullen Bridge at Indian River Inlet", Technical Report; Center for Innovative Bridge Engineering, University of Delaware, Newark, DE, USA.
  133. Shenton III, H.W., Al-Khateeb, H.T., Chajes, M.J. and Wenczel, G. (2017), "Indian river inlet bridge (part A): Description of the bridge and the structural health monitoring system", Bridge Struct., 13(1), 3-13. https://doi.org/10.3233/BRS-170111
  134. SMARTEC (2017a), New Mexico I10 Bridge, https://smartec.ch/en/case-study/new-mexico-i10-bridge/, Published on January 30th, 2017. Last date accessed May 19, 2020.
  135. SMARTEC (2017b), Rio Puerco, https://smartec.ch/en/case-study/rio-puerco/. Published on January 31st, 2017. Last date accessed May 19, 2020.
  136. Soltesz, S. (2002), "Strain monitoring for Horsetail Falls and Sylvan Bridges", Report No. FHWA-OR-DF-02-17; Department of Transportation, OR, USA.
  137. Sun, L., Shang, Z., Xia, Y., Bhowmick, S. and Nagarajaiah, S. (2020), "Review of bridge structural health monitoring aided by big data and artificial intelligence: from condition assessment to damage detection", J. Struct. Eng., 146(5), 04020073. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002535
  138. Swartz, R., Lynch, J., Sweetman, B. and Rolfes, R. (2010), "Structural monitoring of wind turbines using wireless sensor networks", Smart Struct. Syst., Int. J., 6(3), 183-196. https://doi.org/10.12989/sss.2010.6.3.183
  139. Taheri, S. (2019), "A review on five key sensors for monitoring of concrete structures", Constr. Build. Mater., 204, 492-509. https://doi.org/10.1016/j.conbuildmat.2019.01.172
  140. Talebinejad, I., Fischer, C. and Ansari, F. (2011), "Numerical evaluation of vibration-based methods for damage assessment of cable-stayed bridges", Comput.-Aided Civil Infrastruct. Eng., 26(3), 239-251. https://doi.org/10.1111/j.1467-8667.2010.00684.x
  141. Texas Department of Transportation (2020), https://puretechltd.com/case-studies/texas-dept-transportation-fred-hartman-bridge/
  142. Torbol, M., Kim, S. and Chou, P.H. (2013), "Remote structural health monitoring systems for next generation SCADA", Smart Struct. Syst., Int. J., 11(5), 511-531. https://doi.org/10.12989/sss.2013.11.5.511
  143. Virginia Department of Transportation (2019), https://www.virginiadot.org/info/resources/bridge_defs.pdf
  144. Watkins, S.E., Fonda, J.W. and Nanni, A. (2007), "Assessment of an instrumented reinforced-concrete bridge with fiber-reinforced-polymer strengthening", Opt. Eng., 46(5), 051010. https://doi.org/10.1117/1.2740758
  145. Weinmann, T.L. (2015), "Huey P. Long Bridge Widening and Truss Lift Monitoring", In: Structures Congress 2015, Portland, OR, USA, April.
  146. Whelan, M.J., Gangone, M.V., Janoyan, K.D. and Jha, R. (2009), "Real-time wireless vibration monitoring for operational modal analysis of an integral abutment highway bridge", Eng. Struct., 31(10), 2224-2235. https://doi.org/10.1016/j.engstruct.2009.03.022
  147. Wipf, T.J., Phares, B.M., Greimann, L.F., Wood, D.L. and Doornink, J.D. (2007), "Evaluation of steel bridges (Volume I): monitoring the structural condition of fracture-critical bridges using fiber optic technology", Report No. IHRB Project TR-493; Center for Transportation Research and Education, Iowa State University, Ames, IA, USA.
  148. Worden, K., Farrar, C.R., Manson, G. and Park, G. (2007), "The fundamental axioms of structural health monitoring", Proc. R. Soc. A, 463, 1639-1664. https://doi.org/10.1098/rspa.2007.1834
  149. Wu, Z.Y., Zhou, K., Shenton, H.W. and Chajes, M.J. (2019), "Development of sensor placement optimization tool and application to large-span cable-stayed bridge", J. Civil Struct. Health Monitor., 9(1), 77-90. https://doi.org/10.1007/s13349-018-0320-5
  150. Xiao, F., Hulsey, J.L. and Balasubramanian, R. (2017), "Fiber optic health monitoring and temperature behavior of bridge in cold region", Struct. Control Health Monitor., 24(11). https://doi.org/10.1002/stc.2020
  151. Xiao, P., Wu, Z.Y., Christenson, R. and Lobo-Aguilar, S. (2020), "Development of video analytics with template matching methods for using camera as sensor and application to highway bridge structural health monitoring", J. Civil Struct. Health Monit., 10, 405-424. https://doi.org/10.1007/s13349-020-00392-6
  152. Xu, Y. and Xia, Y. (2011), Structural Health Monitoring of Long-Span Suspension Bridges, CRC Press, Boca Raton, FL, USA.
  153. Yan, R., Chen, X. and Mukhopadhyay, S.C. (2017), Structural Health Monitoring, Springer, Berlin, Germany.
  154. Yarnold, M.T. and Moon, F.L. (2015), "Temperature-based structural health monitoring baseline for longspan bridges", Eng. Struct., 86, 157-167. https://doi.org/10.1016/j.engstruct.2014.12.042
  155. Yarnold, M.T., Moon, F.L., Aktan, A.E. and Glisic, B. (2012a), "Structural monitoring of the Tacony-Palmyra Bridge using video and sensor integration for enhanced data interpretation", Proceedings of the 6th International Conference on Bridge Maintenance, Safety and Management, Stresa, Lake Maggiore, Italy, July.
  156. Yarnold, M.T., Moon, F.L., Dubbs, N.C. and Aktan, A.E. (2012b), "Evaluation of a long-span steel tied arch bridge using temperature-based structural identification", Proceedings of the 6th International Conference on Bridge Maintenance, Safety and Management, Stresa, Lake Maggiore, Italy, July.
  157. Yun, H., Nayeri, R., Tasbihgoo, F., Wahbeh, M., Caffrey, J., Wolfe, R., Nigbor, R., Masri, S.F., Abdel-Ghaffar, A. and Sheng, L.-H. (2008), "Monitoring the collision of a cargo ship with the Vincent Thomas Bridge", Struct. Control Health Monitor., 15(2), 183-206. https://doi.org/10.1002/stc.213
  158. Zhang, Y., Kurata, M. and Lynch, J.P. (2017), "Long-term modal analysis of wireless structural monitoring data from a suspension bridge under varying environmental and operational conditions: System design and automated modal analysis", J. Eng. Mech., 143(4), 04016124. https://doi.org/10.1061/(ASCE)EM.1943-7889.0001198
  159. Zhu, Z., Davidson, M.T., Harik, I.E. and Sun, C. (2015), "Effect Of Thermal Loads on Substructures: New Trammel Creek Bridge on KY-100 In Allen Co., Kentucky", Report No. KTC-15-14/SPR10-408-1F; Kentucky Transportation Center, College of Engineering, University of Kentucky, Frankfort, KY, USA.
  160. Zuo, D. and Jones, N. (2005), Stay-cable vibration monitoring of the Fred Hartman Bridge (Houston, Texas) and the Veterans Memorial Bridge (Port Arthur, Texas), FHWA/TX-06/0-1401-2 Report.
  161. Zuo, D. and Jones, N.P. (2010), "Interpretation of field observations of wind-and rain-wind-induced stay cable vibrations", J. Wind Eng. Indust. Aerodyn., 98(2), 73-87. https://doi.org/10.1016/j.jweia.2009.09.004