DOI QR코드

DOI QR Code

Intelligent estimation of the discharge peak in Al Aqiq drainage basin: A case study in Al Madinah Munwwarah region

  • Aldrees, Ali (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Bakheit, Abubakr Taha (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Assilzadeh, Hamid (Institute of Research and Development, Duy Tan University)
  • 투고 : 2020.05.08
  • 심사 : 2021.03.05
  • 발행 : 2021.06.25

초록

The NRCS-CN model is one of the commonly used models for the estimation of discharge peak in a watershed in Saudi Arabia using the DEM outputs and daily rainfall data. The current study aims to classify the sub-basins using rainfall volume, rain off volume and estimate the discharge peak using NRCS-CN method. The drainage map of the studied sub-basin areas was extracted from SRTM Dem 30 m outputs. To estimate the surface runoff and its discharge peak, the drainage area was divided into four tributary basins for Wadi Al-Aqiq using the WMS software outputs from SRTM Dem 30 m. The extracted sub-basins were Wadis Rim, Al Yitimah, Al Ishsh and Sha'ib Ruwawah. The results indicate the importance of the integrated use of the digital processing outputs of the DEM in extracting the morphometric variables necessary in calculating the concentration-time, unit peak discharge and the land resources map in determining the runoff curve. In addition, the weighted curve numbers were ranged between 88.4, 89.9, and 92.1 in Wadi Al Ishsh, wadi Rim, and wadi Al Aqiq watersheds, respectively. It was evident that the attained results can be calibrated by the actual recorded discharge and related to several watersheds.

키워드

과제정보

This publication was supported by the Deanship of Scientific Research at Prince Sattam bin Abdulaziz University, Alkharj, Saudi Arabia

참고문헌

  1. Abd Rahman, N., Yusop, Z., Azen, Z., Taher, S. and Kane, I.L. (2017), "Mitigation of time series approach on climate change adaptation on rainfall of Wadi Al-Aqiq, Madinah, Saudi Arabia", Jurnal Teknologi, 79(5). https://doi.org/10.11113/jt.v79.10206
  2. Abedini, M. and Zhang, C. (2020), "Dynamic performance of concrete columns retrofitted with FRP using segment pressure technique", Compos. Struct., 260, 113473. https://doi.org/10.1016/j.compstruct.2020.113473
  3. Abedini, M., Khlaghi., E.A., Mehrmashhadi, J., Mussa., M.H., Ansari., M. and Momeni, T. (2019), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", Front. Struct. Civil Eng., 14, 532-553. https://doi.org/10.1007/s11709-020-0604-9
  4. Abedini, M., Zhang, C., Mehrmashhadi, J. and Akhlaghi, E. (2020), "Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column", Structures, 28, 456-466. https://doi.org/10.1016/j.istruc.2020.08.084
  5. Abou El-Magd, I., Hermas, E. and El Bastawesy, M. (2010), "GIS-modelling of the spatial variability of flash flood hazard in Abu Dabbab catchment, Red Sea Region, Egypt", Egypt. J. Remote Sens. Space Sci., 13(1), 81-88. https://doi.org/10.1016/j.ejrs.2010.07.010
  6. Afrazi, M. and Rouhanifar, S. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civil Eng. J., 19(4), 83-96.
  7. Afrazi, M., Yazdani, M. and Fakhimi, A. (2017), "The numerical study of effect of an oversize particle on the shear strength of sand in direct shear test", Proceedings of the 4th International Conference on Recent Innovations in Civil Engineering, Architecture, and Urban Palnning, Vol. 1, pp. 1-14.
  8. Afrazi, M., Yazdani, M., Alitalesh, M. and Fakhimi, A. (2018), "Numerical analysis of effective parameters in direct shear test by hybrid discrete - finite element method", Modares Civil Eng. J., 18(3), 13-24.
  9. Afsar Dizaj, E., Fanaie, N. and Zarifpour, A. (2018), "Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained braces", Adv. Struct. Eng., 21(7), 1002-1020. https://doi.org/10.1177/1369433217737115
  10. Al Kajbaf, A., Fanaie, N. and Najarkolaie, K.F. (2018), "Numerical simulation of failure in steel posttensioned connections under cyclic loading", Eng. Fail. Anal., 91, 35-57. https://doi.org/10.1016/j.engfailanal.2018.04.024
  11. Alabduljabbar, H., Haido, J.H., Alyousef, R., Yousif, S.T., McConnell, J., Wakil, K. and Jermsittiparsert, K. (2020), "Prediction of the flexural behavior of corroded concrete beams using combined method", Structures, 25, 1000-1008. https://doi.org/10.1016/j.istruc.2020.03.057
  12. Alahmadi, F., Abd Rahman, N. and Yusop, Z. (2016), "HYDROLOGICAL MODELLING OF UNGAUGED ARID VOLCANIC ENVIRONMENTS AT UPPER BATHAN CATCHMENT, MADINAH, SAUDI ARABIA", Jurnal Teknologi, 78(9-4). https://doi.org/10.11113/jt.v78.9676
  13. Alaskar, A., Shah, S.N.R., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020a), "Development of Pozzolanic material from clay", Adv. Concrete Constr., Int. J., 10(4), 301-310. http://doi.org/10.12989/acc.2020.10.5.393
  14. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020b), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., Int. J., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187
  15. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., Int. J., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147
  16. Arnous, M.O., Aboulela, H.A. and Green, D.R. (2011), "Geo-environmental hazards assessment of the north western Gulf of Suez, Egypt", J. Coast. Conserv., 15(1), 37-50. https://doi.org/10.1007/s11852-010-0118-z
  17. Asadolahi, S.M. and Fanaie, N. (2020), "Performance of self-centering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 23(9), 1813-1822. https://doi.org/10.1177/1369433219900940
  18. Azab, M. (2009), "Flood hazard between Marsa Alam-Ras Banas, Red Sea, Egypt", In: Fourth Environmental Conference, Faculty of Science, Zagazig University, pp. 17-35.
  19. Bai, B., Guo, Z., Zhou, C., Zhang, W. and Zhang, J. (2021), "Application of adaptive reliability importance sampling-based extended domain PSO on single mode failure in reliability engineering", Inform. Sci., 546, 42-59. https://doi.org/10.1016/j.ins.2020.07.069
  20. Ballesteros, J., Bodoque, J., Diez-Herrero, A., Sanchez-Silva, M. and Stoffel, M. (2011), "Calibration of floodplain roughness and estimation of flood discharge based on tree-ring evidence and hydraulic modelling", J. Hydrol., 403(1-2), 103-115. https://doi.org/10.1016/j.jhydrol.2011.03.045
  21. Bao, J., Xue, S., Zhang, P., Dai, Z. and Cui, Y. (2020), "Coupled effects of sustained compressive loading and freeze-thaw cycles on water penetration into concrete", Struct. Concrete, 22(S1), E944-E954. https://doi.org/10.1002/suco.201900200
  22. Biswas, S., Sudhakar, S. and Desai, V. (1999), "Prioritisation of subwatersheds based on morphometric analysis of drainage basin: A remote sensing and GIS approach", J. Indian Soc. Remote Sens., 27(3), 155. https://doi.org/10.1007/BF02991569
  23. Cao, Y., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alaskar, A., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020a), "Investigation on the monotonic behavior of the steel rack upright-beam column connection", Smart Struct. Syst., Int. J., 26(1), 103-115. https://doi.org/10.12989/sss.2020.26.1.103
  24. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020b), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Structures, 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031
  25. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020c), "Application of extreme learning machine in behavior of beam to column connections", Structures, 25, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058
  26. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020d), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., Int. J., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567
  27. Chao, L., Zhang, K., Li, Z., Zhu, Y., Wang, J. and Yu, Z. (2018), "Geographically weighted regression based methods for merging satellite and gauge precipitation", J. Hydrol., 558, 275-289. https://doi.org/10.1016/j.jhydrol.2018.01.042
  28. Chen, Y., He, L., Guan, Y., Lu, H. and Li, J. (2017), "Life cycle assessment of greenhouse gas emissions and water-energy optimization for shale gas supply chain planning based on multi-level approach: Case study in Barnett, Marcellus, Fayetteville, and Haynesville shales", Energy Convers. Manage., 134, 382-398. https://doi.org/10.1016/j.enconman.2016.12.019
  29. Chen, Y., He, L., Li, J. and Zhang, S. (2018), "Multi-criteria design of shale-gas-water supply chains and production systems towards optimal life cycle economics and greenhouse gas emissions under uncertainty", Comput. Chem. Eng, 109, 216-235. https://doi.org/10.1016/j.compchemeng.2017.11.014
  30. Chen, X., Wang, D., Wang, T., Yang, Z., Zou, X., Wang, P., Luo, W., Li, Q., Liao, L. and Hu, W. (2019), "Enhanced photoresponsivity of a GaAs nanowire metal-semiconductor-metal photodetector by adjusting the fermi level", ACS Appl. Mater. Interf., 11(36), 33188-33193. https://doi.org/10.1021/acsami.9b07891
  31. Chen, J., Liu, G. and Liu, Y. (2020), "Lightweight privacy-preserving raw data publishing scheme", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2020.2974183
  32. Chen, Y., Li, J., Lu, H. and Yan, P. (2021), "Coupling system dynamics analysis and risk aversion programming for optimizing the mixed noise-driven shale gas-water supply chains", J. Cleaner Prod., 278, 123209. https://doi.org/10.1016/j.jclepro.2020.123209
  33. Cheng, H. and Liu, Y. (2020), "An improved RSU-based authentication scheme for VANET", J. Internet Technol., 21(4), 1137-1150.
  34. Cheng, X., He, L., Lu, H., Chen, Y. and Ren, L. (2016), "Optimal water resources management and system benefit for the Marcellus shale-gas reservoir in Pennsylvania and West Virginia", J. Hydrol., 540, 412-422. https://doi.org/10.1016/j.jhydrol.2016.06.041
  35. Ding, L., Li, S., Gao, H., Liu, Y.-J., Huang, L. and Deng, Z. (2019), "Adaptive neural network-based finite-time online optimal tracking control of the nonlinear system with dead zone", IEEE Transact. Cybernetics, 51(1), 382-392. https://doi.org/10.1109/TCYB.2019.2939424
  36. Dinh-Cong, D., Pham-Duy, S. and Nguyen-Thoi, T. (2018), "Damage detection of 2D frame structures using incomplete measurements by optimization procedure and model reduction", J. Adv. Eng. Computat., 2(3), 164-173. http://dx.doi.org/10.25073/jaec.201823.203
  37. Dinh-Cong, D., Vo-Van, L., Nguyen-Quoc, D. and Nguyen-Thoi, T. (2019), "Modal kinetic energy change ratio-based damage assessment of laminated composite beams using noisy and incomplete measurements", J. Adv. Eng. Computat., 3(3), 452-463. http://dx.doi.org/10.25073/jaec.201933.248
  38. Dong, Q. and Cui, L. (2021), "Reliability analysis of a system with two-stage degradation using Wiener processes with piecewise linear drift", IMA J. Manage. Mathe., 32(1), 3-29. https://doi.org/10.1093/imaman/dpaa009
  39. Duan, F., Hu, M., Guo, C., Song, Y., Wang, M., He, L., Zhang, Z., Pettinari, R. and Zhou, L. (2020), "Chromium-based metal-organic framework embedded with cobalt phthalocyanine for the sensitively impedimetric cytosensing of colorectal cancer (CT26) cells and cell imaging", Chem. Eng. J., 398, 125452. https://doi.org/10.1016/j.cej.2020.125452
  40. Fanaie, N. and Ezzatshoar, S. (2014), "Studying the seismic behavior of gate braced frames by incremental dynamic analysis (IDA)", J. Constr. Steel Res., 99, 111-120. https://doi.org/10.1016/j.jcsr.2014.04.008
  41. Fanaie, N. and Moghadam, H.S. (2019), "Experimental study of rigid connection of drilled beam to CFT column with external stiffeners", J. Constr. Steel Res., 153, 209-221. https://doi.org/10.1016/j.jcsr.2018.10.016
  42. Fanaie, N. and Tahriri, M. (2017), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1002/smll.202002138
  43. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485
  44. Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382
  45. Fanaie, N., Kazerani, S. and Soroushnia, S. (2017), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Methods Civil Eng., 1(3), 16-23.
  46. Fanaie, N., Faegh, S.S. and Partovi, F. (2019), "An improved and innovative formulation for calculating amplified elastic story drift induced by RBS connections in steel moment frames", J. Constr. Steel Res., 160, 510-527. https://doi.org/10.1016/j.jcsr.2019.06.003
  47. Feng, Q., Li, Y., Wang, N., Hao, Y., Chang, J., Wang, Z., Zhang, X., Zhang, Z. and Wang, L. (2020a), "A biomimetic nanogenerator of reactive nitrogen species based on battlefield transfer strategy for enhanced immunotherapy", Small, 16(25), 2002138. https://doi.org/10.1002/smll.202002138
  48. Feng, S., Lu, H., Tian, P., Xue, Y., Lu, J., Tang, M. and Feng, W. (2020b), "Analysis of microplastics in a remote region of the Tibetan Plateau: Implications for natural environmental response to human activities", Sci. Total Environ., 739, 140087. https://doi.org/10.1016/j.scitotenv.2020.140087
  49. Feng, W., Lu, H., Yao, T. and Yu, Q. (2020c), "Drought characteristics and its elevation dependence in the Qinghai-Tibet plateau during the last half-century", Scientific Reports, 10(1), 1-11. https://doi.org/10.1038/s41598-020-71295-1
  50. Ferguson, B.K. (1998), Introduction to Stormwater: Concept, Purpose, Design, John Wiley & Sons.
  51. Ganesan, T., Vasant, P., Sanghvi, P., Thomas, J. and Litvinchev, I. (2020), "Random matrix generators for optimizing a fuzzy biofuel supply chain system", J. Adv. Eng. Computat., 4(1), 33-50. http://dx.doi.org/10.25073/jaec.202041.268
  52. Gao, N. and Zhang, Y. (2019), "A low frequency underwater metastructure composed by helix metal and viscoelastic damping rubber", J. Vib. Control, 25(3), 538-548. https://doi.org/10.1177/1077546318788446.
  53. Gao, N., Wu, J.H., Yu, L. and Hou, H. (2016), "Ultralow frequency acoustic bandgap and vibration energy recovery in tetragonal folding beam phononic crystal", Int. J. Modern Phys. B, 30(18), 1650111. https://doi.org/10.1142/S0217979216501113
  54. Gao, N., Cheng, B., Hou, H. and Zhang, R. (2018a), "Mesophase pitch based carbon foams as sound absorbers", Mater. Lett., 212, 243-246. https://doi.org/10.1016/j.matlet.2017.10.074
  55. Gao, N., Hou, H., Cheng, B. and Zhang, R. (2018b), "A hollow inclusion self-similarity phononic crystal with an ultra-low-frequency bandgap", Int. J. Modern Phys. B, 32(02), 1850005. https://doi.org/10.1142/S0217979218500054
  56. Gao, N., Hou, H. and Wu, J.H. (2018c), "A composite and deformable honeycomb acoustic metamaterial", Int. J. Modern Phys. B, 32(20), 1850204. https://doi.org/10.1142/S0217979218502041
  57. Gao, N., Hou, H., Zhang, Y. and Wu, J.H. (2018d), "Sound absorption of a new oblique-section acoustic metamaterial with nested resonator", Modern Physics Letters B, 32(04), 1850040. https://doi.org/10.1142/S0217984918500409
  58. Gao, N.-S., Guo, X.-Y., Cheng, B.-Z., Zhang, Y.-N., Wei, Z.-Y. and Hou, H. (2019a), "Elastic wave modulation in hollow metamaterial beam with acoustic black hole", IEEE Access, 7, 124141-124146. https://doi.org/10.1109/ACCESS.2019.2938250
  59. Gao, N., Wei, Z., Hou, H. and Krushynska, A.O. (2019b), "Design and experimental investigation of V-folded beams with acoustic black hole indentations", J. Acoust. Soc. Am., 145(1), EL79-EL83. https://doi.org/10.1121/1.5088027
  60. Gholipour, G., Zhang, C. and Mousavi, A.A. (2020), "Numerical analysis of axially loaded RC columns subjected to the combination of impact and blast loads", Eng. Struct., 219, 110924. https://doi.org/10.1016/j.engstruct.2020.110924
  61. Guan, Z., Xing, Q., Xu, M., Yang, R., Liu, T. and Wang, Z. (2019), "MFQE 2.0: A new approach for multi-frame quality enhancement on compressed video", IEEE Transact. Pattern Anal. Mach. Intell., 43(3), 949-963. 10.1109/TPAMI.2019.2944806
  62. Guo, H., Qian, K., Cai, A., Tang, J. and Liu, J. (2019), "Ordered gold nanoparticle arrays on the tip of silver wrinkled structures for single molecule detection", Sensors Actuat. B: Chem., 300, 126846. https://doi.org/10.1016/j.snb.2019.126846
  63. Guo, H., Li, X., Zhu, Q., Zhang, Z., Liu, Y., Li, Z., Wen, H., Li, Y., Tang, J. and Liu, J. (2020), "Imaging nano-defects of metal waveguides using the microwave cavity interference enhancement method", Nanotechnology, 31(45), 455203. https://doi.org/10.1088/1361-6528/abaa74
  64. Haghnazar, H., Sangsefidi, Y., Mehraein, M. and Tavakol-Davani, H. (2020), "Evaluation of infilling and replenishment of river sand mining pits", Environ. Earth Sci., 79(14), 362. https://doi.org/10.1007/s12665-020-09106-z
  65. Han, X., Zhang, D., Yan, J., Zhao, S. and Liu, J. (2020), "Process development of flue gas desulphurization wastewater treatment in coal-fired power plants towards Zero Liquid Discharge: Energetic, economic and environmental analyses", J. Cleaner Prod., 26, 121144. https://doi.org/10.1016/j.jclepro.2020.121144
  66. He, L., Chen, Y. and Li, J. (2018a), "A three-level framework for balancing the tradeoffs among the energy, water, and air-emission implications within the life-cycle shale gas supply chains", Resour. Conserv. Recycl., 133, 206-228. https://doi.org/10.1016/j.resconrec.2018.02.015
  67. He, L., Chen, Y., Zhao, H., Tian, P., Xue, Y. and Chen, L. (2018b), "Game-based analysis of energy-water nexus for identifying environmental impacts during Shale gas operations under stochastic input", Sci. Total Environ., 627, 1585-1601. https://doi.org/10.1016/j.scitotenv.2018.02.004
  68. He, L., Shen, J. and Zhang, Y. (2018c), "Ecological vulnerability assessment for ecological conservation and environmental management", J. Environ. Manage., 206, 1115-1125. https://doi.org/10.1016/j.jenvman.2017.11.059
  69. He, L., Liu, J., Liu, Y., Cui, B., Hu, B., Wang, M., Tian, K., Song, Y., Wu, S. and Zhang, Z. (2019), "Titanium dioxide encapsulated carbon-nitride nanosheets derived from MXene and melamine-cyanuric acid composite as a multifunctional electrocatalyst for hydrogen and oxygen evolution reaction and oxygen reduction reaction", Appl. Catal. B: Environ., 248, 366-379. https://doi.org/10.1016/j.apcatb.2019.02.033
  70. He, L., Shao, F. and Ren, L. (2020), "Sustainability appraisal of desired contaminated groundwater remediation strategies: an information-entropy-based stochastic multi-criteria preference model", Environ. Develop. Sustain., 23, 1759-1779. https://doi.org/10.1007/s10668-020-00650-z
  71. Horton, R.E. (1945), "Erosional development of streams and their drainage basins; hydrophysical approach to quantitative morphology", Geol. Soc. Am. Bull., 56(3), 275-370. https://doi.org/10.1130/0016-7606(1945)56[275:EDOSAT]2.0.CO;2
  72. Hu, X., Chong, H.-Y. and Wang, X. (2019), "Sustainability perceptions of off-site manufacturing stakeholders in Australia", J. Cleaner Prod., 227, 346-354. https://doi.org/10.1016/j.jclepro.2019.03.258
  73. Hu, J., Zhang, H., Li, Z., Zhao, C., Xu, Z. and Pan, Q. (2020a), "Object traversing by monocular UAV in outdoor environment", Asian J. Control. https://doi.org/10.1002/asjc.2415
  74. Hu, J., Zhang, H., Liu, L., Zhu, X., Zhao, C. and Pan, Q. (2020b), "Convergent Multiagent Formation Control With Collision Avoidance", IEEE Transact. Robotics, 36(6), 1805-1818. https://doi.org/10.1109/TRO.2020.2998766
  75. Hu, P., Cao, L., Su, J., Li, Q. and Li, Y. (2020c), "Distribution characteristics of salt-out particles in steam turbine stage", Energy, 192, 116626. https://doi.org/10.1016/j.energy.2019.116626
  76. Huang, Z., Yi, S., Chen, H. and He, X. (2019), "Parameter analysis of damaged region for laminates with matrix defects", J. Sandw. Struct. Mater., 23(2), 580-620. https://doi.org/10.1177/1099636219842290
  77. Huang, H., Huang, M., Zhang, W., Pospisil, S. and Wu, T. (2020a), "Experimental investigation on rehabilitation of corroded RC columns with bsp and hpfl under combined loadings", J. Struct. Eng., 146(8), 04020157. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002725
  78. Huang, Y., Wang, J., Wang, F. and He, B. (2020b), "Event-triggered adaptive finite-time tracking control for full state constraints nonlinear systems with parameter uncertainties and given transient performance", ISA Transact., 108, 131-143. https://doi.org/10.1016/j.isatra.2020.08.022
  79. Huynh-Van, V. and Tran-Thanh, P. (2019), "Discrete Sliding Mode Control Design for Piezoelectric Actuator", J. Adv. Eng. Comput., 3(3), 492-502. http://dx.doi.org/10.25073/jaec.201933.254
  80. Ibrahim, E.A.H., El-Barodi, M. and Al-Ghamdi, K. (2015), "Integration of Point and Remote Sensing Data for Monitoring Surface Runoff around Madinah City, Saudi Arabia", Adv. Remote Sens., 4(04), 287. https://doi.org/10.4236/ars.2015.44024
  81. Ismail, Y., Othman, A., Abd El-Latif, R. and Ahmed, K. (2010), "Impact of ash ood on development potentials of Wadi Abu Ghusun, Eastern Desert, Egypt", Kuwait J. Sci. Eng., 37(2A), 111-134.
  82. Jia, Q., Li, Z., Guo, C., Huang, X., Kang, M., Song, Y., He, L., Zhou, N., Wang, M. and Zhang, Z. (2020), "PEGMA-modified bimetallic NiCo Prussian blue analogue doped with Tb (III) ions: Efficiently pH-responsive and controlled release system for anticancer drug", Chem. Eng. J., 389, 124468. https://doi.org/10.1016/j.cej.2020.124468
  83. Jia, L.-C., Jin, Y.-F., Ren, J.-W., Zhao, L.-H., Yan, D.-X. and Li, Z.-M. (2021), "Highly thermally conductive liquid metal-based composites with superior thermostability for thermal management", J. Mater. Chem. C, 9(8), 2904-2911. https://doi.org/10.1039/D0TC05493C
  84. Jiang, Q., Shao, F., Gao, W., Chen, Z., Jiang, G. and Ho, Y.-S. (2018), "Unified no-reference quality assessment of singly and multiply distorted stereoscopic images", IEEE Transact. Image Process., 28(4), 1866-1881. https://doi.org/10.1109/TIP.2018.2881828
  85. Jin, Y.-Y., Xie, L.-H. and Yang, H.-B. (2020), "Locally upper bounded poset-valued maps and stratifiable spaces", Topol. Applicat., 107517. [In press] https://doi.org/10.1016/j.topol.2020.107517
  86. Ju, Y., Shen, T. and Wang, D. (2020), "Bonding behavior between reactive powder concrete and normal strength concrete", Constr. Build. Mater., 242, 118024. https://doi.org/10.1016/j.conbuildmat.2020.118024
  87. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.-T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 36, 1539-1558. https://doi.org/10.1007/s00366-019-00780-7
  88. Lei, Z., Hao, S., Yang, J. and Dan, X. (2020), "Study on solid waste pyrolysis coke catalyst for catalytic cracking of coal tar", Int. J. Hydrog. Energy, 45(38), 19280-19290. https://doi.org/10.1016/j.ijhydene.2020.05.075
  89. Li, H., Tang, J., Kang, Y., Zhao, H., Fang, D., Fang, X., Chen, R. and Wei, Z. (2018), "Optical properties of quasi-type-II structure in GaAs/GaAsSb/GaAs coaxial single quantum-well nanowires", Appl. Phys. Lett., 113(23), 233104. https://doi.org/10.1063/1.5053844
  90. Li, T., Xu, M., Zhu, C., Yang, R., Wang, Z. and Guan, Z. (2019a), "A deep learning approach for multi-frame in-loop filter of HEVC", IEEE Transact. Image Process., 28(11), 5663-5678. https://doi.org/10.1109/TIP.2019.2921877
  91. Li, X., Zhu, Y. and Wang, J. (2019b), "Highly efficient privacy preserving location-based services with enhanced one-round blind filter", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2019.2926385
  92. Li, C., Sun, L., Xu, Z., Wu, X., Liang, T. and Shi, W. (2020a), "Experimental investigation and error analysis of high precision FBG displacement sensor for structural health monitoring", Int. J. Struct. Stabil. Dyn., 20(06), 2040011. https://doi.org/10.1142/S0219455420400118
  93. Li, H., Zhang, T., Tsang, D.C. and Li, G. (2020b), "Effects of external additives: Biochar, bentonite, phosphate, on co-composting for swine manure and corn straw", Chemosphere, 248, 125927. https://doi.org/10.1016/j.chemosphere.2020.125927
  94. Li, Z., Liu, H., Dun, Z., Ren, L. and Fang, J. (2020c), "Grouting effect on rock fracture using shear and seepage assessment", Constr. Build. Mater., 242, 118131. https://doi.org/10.1016/j.conbuildmat.2020.118131
  95. Li, Z., Zhou, H., Hu, D. and Zhang, C. (2020d), "Yield criterion for rocklike geomaterials based on strain energy and CMP model", Int. J. Geomech., 20(3), 04020013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001593
  96. Lin, J., Cai, X., Liu, Z., Liu, N., Xie, M., Zhou, B., Wang, H. and Guo, Z. (2020), "Anti-liquid-interfering and bacterially antiadhesive strategy for highly stretchable and ultrasensitive strain sensors based on Cassie-Baxter wetting state", Adv. Funct. Mater., 30(23), 2000398. https://doi.org/10.1002/adfm.202000398
  97. Liu, J., Wu, C., Wu, G. and Wang, X. (2015), "A novel differential search algorithm and applications for structure design", Appl. Mathe. Computat., 268, 246-269. https://doi.org/10.1016/j.amc.2015.06.036
  98. Liu, L., Li, J., Yue, F., Yan, X., Wang, F., Bloszies, S. and Wang, Y. (2018), "Effects of arbuscular mycorrhizal inoculation and biochar amendment on maize growth, cadmium uptake and soil cadmium speciation in Cd-contaminated soil", Chemosphere, 194, 495-503. https://doi.org/10.1016/j.chemosphere.2017.12.025
  99. Liu, E., Lv, L., Yi, Y. and Xie, P. (2019), "Research on the steady operation optimization model of natural gas pipeline considering the combined operation of air coolers and compressors", IEEE Access, 7, 83251-83265. https://doi.org/10.1109/ACCESS.2019.2924515
  100. Liu, C., Wang, F., He, L., Deng, X., Liu, J. and Wu, Y. (2020a), "Experimental and numerical investigation on dynamic responses of the umbrella membrane structure excited by heavy rainfall", J. Vib. Control, 27(5-6), 675-684. https://doi.org/10.1177/1077546320932691
  101. Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020b), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., Int. J., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743
  102. Liu, L., Li, D., Ma, Y., Shen, H., Zhao, S. and Wang, Y. (2020c), "Combined application of arbuscular mycorrhizal fungi and exogenous melatonin alleviates drought stress and improves plant growth in tobacco seedlings", J. Plant Growth Regul., 1-14. https://doi.org/10.1007/s00344-020-10165-6
  103. Liu, Q., Song, Z., Han, H., Donkor, S., Jiang, L., Wang, W. and Chu, H. (2020d), "A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves", Constr. Build. Mater., 260, 119695. https://doi.org/10.1016/j.conbuildmat.2020.119695
  104. Liu, S., Yu, W., Chan, F.T. and Niu, B. (2020e), "A variable weight-based hybrid approach for multi-attribute group decision making under interval-valued intuitionistic fuzzy sets", Int. J. Intell. Syst., 36(2), 1015-1052. https://doi.org/10.1002/int.22329
  105. Liu, Y., Yang, C. and Sun, Q. (2020f), "Thresholds based image extraction schemes in big data environment in intelligent traffic management", IEEE Transact. Intell. Transport. Syst. https://doi.org/10.1109/TITS.2020.2994386
  106. Liu, Y., Zhang, B., Feng, Y., Lv, X., Ji, D., Niu, Z., Yang, Y., Zhao, X. and Fan, Y. (2020g), "Development of 340-GHz Transceiver Front End Based on GaAs Monolithic Integration Technology for THz Active Imaging Array", Appl. Sci., 10(21), 7924. https://doi.org/10.3390/app10217924
  107. Long, Q., Wu, C. and Wang, X. (2015), "A system of nonsmooth equations solver based upon subgradient method", Appl. Mathe. Computat., 251, 284-299. https://doi.org/10.1016/j.amc.2014.11.064
  108. Lu, H., Tian, P. and He, L. (2019), "Evaluating the global potential of aquifer thermal energy storage and determining the potential worldwide hotspots driven by socio-economic, geo-hydrologic and climatic conditions", Renew. Sustain. Energy Rev., 112, 788-796. https://doi.org/10.1016/j.rser.2019.06.013
  109. Lu, H., Guan, Y., He, L., Adhikari, H., Pellikka, P., Heiskanen, J. and Maeda, E. (2020), "Patch aggregation trends of the global climate landscape under future global warming scenario", Int. J. Climatol., 40(5), 2674-2685. https://doi.org/10.1002/joc.6358
  110. Lv, Q., Liu, H., Wang, J., Liu, H. and Shang, Y. (2020a), "Multiscale analysis on spatiotemporal dynamics of energy consumption CO2 emissions in China: Utilizing the integrated of DMSP-OLS and NPP-VIIRS nighttime light datasets", Sci. Total Environ., 703, 134394. https://doi.org/10.1016/j.scitotenv.2019.134394
  111. Lv, X., Li, N., Xu, X. and Yang, Y. (2020b), "Understanding the emergence and development of online travel agencies: a dynamic evaluation and simulation approach", Internet Res, 30(6), 1783-1810. https://doi.org/10.1108/INTR-11-2019-0464
  112. Magesh, N., Jitheshlal, K., Chandrasekar, N. and Jini, K. (2013), "Geographical information system-based morphometric analysis of Bharathapuzha river basin, Kerala, India", Appl. Water Sci., 3(2), 467-477. https://doi.org/10.1007/s13201-013-0095-0
  113. Mahmoud, S.H. and Alazba, A. (2015), "Hydrological response to land cover changes and human activities in arid regions using a geographic information system and remote sensing", PloS one, 10(4), e0125805. https://doi.org/10.1371/journal.pone.0125805
  114. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6
  115. Mi, C., Cao, L., Zhang, Z., Feng, Y., Yao, L. and Wu, Y. (2020), "A port container code recognition algorithm under natural conditions", J. Coast. Res., 103(SI), 822-829. https://doi.org/10.2112/SI103-170.1
  116. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853
  117. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785
  118. Ni, T., Chang, H., Song, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2019a), "Non-intrusive online distributed pulse shrinking-based interconnect testing in 2.5 D IC", IEEE Transact. Circuits Syst. II: Express Briefs. https://doi.org/10.1109/TCSII.2019.2962824
  119. Ni, T., Yao, Y., Chang, H., Lu, L., Liang, H., Yan, A., Huang, Z. and Wen, X. (2019b), "LCHR-TSV: Novel low cost and highly repairable honeycomb-based TSV redundancy architecture for clustered faults", IEEE Transact. Comput.-Aided Des. Integr Circuits Syst., 39(10), 2938-2951. https://doi.org/10.1109/TCAD.2019.2946243
  120. Ni, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2020), "A cost-effective TSV repair architecture for clustered faults in 3D IC", IEEE Transact. Comput.-Aided Des. Integr. Circuits Syst. https://doi.org/10.1109/TCAD.2020.3025169
  121. NRCS, U. (1986), Urban Hydrology for Small Watersheds-Technical Release 55; US Department of Agriculture Natural Resources Conservation: Washington, DC, USA.
  122. Peng, S., Chen, Q., Zheng, C. and Liu, E. (2020), "Analysis of particle deposition in a new-type rectifying plate system during shale gas extraction", Energy Sci. Eng., 8(3), 702-717. https://doi.org/10.1002/ese3.543
  123. Qi, C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives", Minerals Eng., 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025
  124. Qi, C., Chen, Q. and Kim, S.S. (2020), "Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multi-objective optimization", Minerals Eng., 155, 106422. https://doi.org/10.1016/j.mineng.2020.106422
  125. Qu, S., Han, Y., Wu, Z. and Raza, H. (2020), "Consensus modeling with asymmetric cost based on data-driven robust optimization", Group Decis. Negot., 1-38. https://doi.org/10.1007/s10726-020-09707-w
  126. Ren, J., Zhang, C. and Hao, Q. (2020), "A theoretical method to evaluate honeynet potency", Future Gener. Comput. Syst., 116, 76-85. https://doi.org/10.1016/j.future.2020.08.021
  127. Roy, S. and Mistri, B. (2013), "Estimation of peak flood discharge for an ungauged river: a case study of the Kunur River, West Bengal", Geogr. J., 2013. https://doi.org/10.1155/2013/214140
  128. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424. http://doi.org/10.12989/sss.2018.22.4.413
  129. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679
  130. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Statist. Mech. Appl., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046
  131. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335
  132. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019a), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534
  133. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019b), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319
  134. Shariati, M., Trung, N.-T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019c), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., Int. J., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427
  135. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020a), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0
  136. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020b), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., Int. J., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155
  137. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020c), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., Int. J., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183
  138. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020d), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x
  139. Shen, C.L., Lou, Q., Zang, J.H., Liu, K.K., Qu, S.N., Dong, L. and Shan, C.X. (2020), "Near-infrared chemiluminescent carbon nanodots and their application in reactive oxygen species bioimaging", Adv. Sci., 7(8), 1903525. https://doi.org/10.1002/advs.201903525
  140. Shi, K., Tang, Y., Liu, X. and Zhong, S. (2017a), "Non-fragile sampled-data robust synchronization of uncertain delayed chaotic Lurie systems with randomly occurring controller gain fluctuation", ISA Transact., 66, 185-199. https://doi.org/10.1016/j.isatra.2016.11.002
  141. Shi, K., Tang, Y., Liu, X. and Zhong, S. (2017b), "Secondary delay-partition approach on robust performance analysis for uncertain time-varying Lurie nonlinear control system", Optim. Control Applicat. Methods, 38(6), 1208-1226. https://doi.org/10.1002/oca.2326
  142. Shi, K., Tang, Y., Zhong, S., Yin, C., Huang, X. and Wang, W. (2018), "Nonfragile asynchronous control for uncertain chaotic Lurie network systems with Bernoulli stochastic process", Int. J. Robust Nonlinear Control, 28(5), 1693-1714. https://doi.org/10.1002/rnc.3980
  143. Shi, M., Narayanasamy, M., Yang, C., Zhao, L., Jiang, J., Angaiah, S. and Yan, C. (2020a), "3D interpenetrating assembly of partially oxidized MXene confined Mn-Fe bimetallic oxide for superior energy storage in ionic liquid", Electrochimica Acta, 334, 135546. https://doi.org/10.1016/j.electacta.2019.135546
  144. Shi, M., Xiao, P., Lang, J., Yan, C. and Yan, X. (2020b), "Porous g-C3N4 and MXene dual-confined FeOOH quantum dots for superior energy storage in an ionic liquid", Advanced Science, 7(2), 1901975. https://doi.org/10.1002/advs.201901975
  145. Singh, V., Gu, N. and Wang, X. (2011), "A theoretical framework of a BIM-based multi-disciplinary collaboration platform", Automat. Constr., 20(2), 134-144. https://doi.org/10.1016/j.autcon.2010.09.011
  146. Sorman, A.U. (1993), "Application of the TR-55 Model to Storms in Arid Climate Case Study: Upper Tabalah, The Kingdom of Saudi Arabia", Meteorol. Environ. Arid Land Agric. Sci., 4(1).
  147. Sorman, A., Qari, M. and Hassani, M. (1994), "Estimation of flood peaks using remote sensing techniques; case study: Wadi Itwad, southwestern Saudi Arabia", J. King Abdulaziz Univ.: Metrology, Environ. Arid Land Agric. Sci., 5, 161-177.
  148. Stralher, A. (1964), "Quantitative geomorphology of drainage basins and channel network", In: Handbook of Applied Hidrology, McGraw Hill, pp. 439-476.
  149. Su, F., Jia, Q., Li, Z., Wang, M., He, L., Peng, D., Song, Y., Zhang, Z. and Fang, S. (2019a), "Aptamer-templated silver nanoclusters embedded in zirconium metal-organic framework for targeted antitumor drug delivery", Micropor. Mesopor. Mater., 275, 152-162. https://doi.org/10.1016/j.micromeso.2018.08.026
  150. Su, Z., Liu, E., Xu, Y., Xie, P., Shang, C. and Zhu, Q. (2019b), "Flow field and noise characteristics of manifold in natural gas transportation station", Oil & Gas Science and Technology-Revue d'IFP Energies Nouvelles, 74, 70. https://doi.org/10.2516/ogst/2019038
  151. Subyani, A. and Al-Ahmadi, F. (2011), "Rainfall-runoff modeling in the Al-Madinah area of Western Saudi Arabia", J. Environ. Hydrol., 19.
  152. Subyani, A.M., Al-Modayan, A.A. and Al-Ahmadi, F.S. (2010), "Topographic, seasonal and aridity influences on", J. Environ. Hydrol., 18(2).
  153. Sun, L., Yang, Z., Jin, Q. and Yan, W. (2020a), "Effect of Axial Compression Ratio on Seismic Behavior of GFRP Reinforced Concrete Columns", Int. J. Struct. Stabil. Dyn., 20(06), 2040004. https://doi.org/10.1142/S0219455420400040
  154. Sun, Y., Wang, J., Wu, J., Shi, W., Ji, D., Wang, X. and Zhao, X. (2020b), "Constraints hindering the development of high-rise modular buildings", Appl. Sci., 10(20), 7159. https://doi.org/10.3390/app10207159
  155. Tera'at El Mansuriyah St, E. (2012), "Determining potential sites for runoff water harvesting using remote sensing and geographic information systems-based modeling in Sinai", Am. J. Environ. Sci., 8, 42-55. https://doi.org/10.3844/ajessp.2012.42.55
  156. Tian, P., Lu, H., Feng, W., Guan, Y. and Xue, Y. (2020), "Large decrease in streamflow and sediment load of Qinghai-Tibetan Plateau driven by future climate change: A case study in Lhasa River Basin", Catena, 187, 104340. https://doi.org/10.1016/j.catena.2019.104340
  157. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. https://doi.org/10.12989/scs.2014.17.5.623
  158. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "RETRACTED ARTICLE: Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manuf., 29, 1793-1801. https://doi.org/10.1007/s10845-016-1217-y
  159. Trung, N.-T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639
  160. Tsai, Y.-H., Wang, J., Chien, W.-T., Wei, C.-Y., Wang, X. and Hsieh, S.-H. (2019), "A BIM-based approach for predicting corrosion under insulation", Automat. Constr., 107, 102923. https://doi.org/10.1016/j.autcon.2019.102923
  161. Wang, W., Guo, J., Long, C., Li, W. and Guan, J. (2015), "Flaky carbonyl iron particles with both small grain size and low internal strain for broadband microwave absorption", J. Alloys Compounds, 637, 106-111. https://doi.org/10.1016/j.jallcom.2015.02.220
  162. Wang, X., Wang, J., Sun, X., Wei, S., Cui, L., Yang, W. and Liu, J. (2018), "Hierarchical coral-like NiMoS nanohybrids as highly efficient bifunctional electrocatalysts for overall urea electrolysis", Nano Res., 11(2), 988-996. https://doi.org/10.1007/s12274-017-1711-3
  163. Wang, G., Yao, Y., Chen, Z. and Hu, P. (2019a), "Thermodynamic and optical analyses of a hybrid solar CPV/T system with high solar concentrating uniformity based on spectral beam splitting technology", Energy, 166, 256-266. https://doi.org/10.1016/j.energy.2018.10.089
  164. Wang, M., Hu, M., Liu, J., Guo, C., Peng, D., Jia, Q., He, L., Zhang, Z. and Du, M. (2019b), "Covalent organic framework-based electrochemical aptasensors for the ultrasensitive detection of antibiotics", Biosens. Bioelectron., 132, 8-16. https://doi.org/10.1016/j.bios.2019.02.040
  165. Wang, B., Zhang, B. and Liu, X. (2020a), "An image encryption approach on the basis of a time delay chaotic system", Optik, 225, 165737. https://doi.org/10.1016/j.ijleo.2020.165737
  166. Wang, B., Zhang, B., Liu, X. and Zou, F. (2020b), "Novel infrared image enhancement optimization algorithm combined with DFOCS", Optik, 224, 165476. https://doi.org/10.1016/j.ijleo.2020.165476
  167. Wang, J., Huang, Y., Wang, T., Zhang, C. and hui Liu, Y. (2020c), "Fuzzy finite-time stable compensation control for a building structural vibration system with actuator failures", Appl. Soft Comput., 93, 106372. https://doi.org/10.1016/j.asoc.2020.106372
  168. Wang, J., Zhu, P., He, B., Deng, G., Zhang, C. and Huang, X. (2020d), "An adaptive neural sliding mode control with ESO for uncertain nonlinear systems", Int. J. Control Automat. Syst., 19(2), 687-697. https://doi.org/10.1007/s12555-019-0972-x
  169. Wang, S., Zhang, K., van Beek, L.P., Tian, X. and Bogaard, T.A. (2020e), "Physically-based landslide prediction over a large region: Scaling low-resolution hydrological model results for high-resolution slope stability assessment", Environ. Modell. Softw., 124, 104607. https://doi.org/10.1016/j.envsoft.2019.104607
  170. Wang, X.-F., Gao, P., Liu, Y.-F., Li, H.-F. and Lu, F. (2020f), "Predicting Thermophilic Proteins by Machine Learning", Curr. Bioinform., 15(5), 493-502. https://doi.org/10.2174/1574893615666200207094357
  171. Wang, X., Liu, Y. and Choo, K. (2020g), "Fault tolerant, ulti-subset aggregation scheme for smart grid", IEEE Transact. Ind. Inform.
  172. Wang, D., Chen, X., Fang, X., Tang, J., Lin, F., Wang, X., Liu, G., Liao, L., Ho, J.C. and Wei, Z. (2021), "Photoresponse improvement of mixed-dimensional 1D-2D GaAs photodetectors by incorporating constructive interface states", Nanoscale, 13(2), 1086-1092. https://doi.org/10.1039/D0NR06788A
  173. Wu, C., Wang, X., Chen, M. and Kim, M.J. (2019a), "Differential received signal strength based RFID positioning for construction equipment tracking", Adv. Eng. Inform, 42, 100960. https://doi.org/10.1016/j.aei.2019.100960
  174. Wu, T., Cao, J., Xiong, L. and Zhang, H. (2019b), "New stabilization results for semi-Markov chaotic systems with fuzzy sampled-data control", Complexity, 2019. https://doi.org/10.1155/2019/7875305
  175. Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2020a), "Critical review of data-driven decision-making in bridge operation and maintenance", Struct. Infrastruct. Eng., 1-24. https://doi.org/10.1080/15732479.2020.1833946
  176. Wu, T., Xiong, L., Cheng, J. and Xie, X. (2020b), "New results on stabilization analysis for fuzzy semi-Markov jump chaotic systems with state quantized sampled-data controller", Inform. Sci., 521, 231-250. https://doi.org/10.1016/j.ins.2020.02.051
  177. Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2021), "Ontological knowledge base for concrete bridge rehabilitation project management", Automat. Constr., 121, 103428. https://doi.org/10.1016/j.autcon.2020.103428
  178. Xiong, L., Zhang, H., Li, Y. and Liu, Z. (2016), "Improved stability and H∞ performance for neutral systems with uncertain Markovian jump", Nonlinear Anal.: Hybrid Syst., 19, 13-25. https://doi.org/10.1016/j.nahs.2015.07.005
  179. Xiong, Z., Xiao, N., Xu, F., Zhang, X., Xu, Q., Zhang, K. and Ye, C. (2020), "An equivalent exchange based data forwarding incentive scheme for socially aware networks", J. Signal Process. Syst., 93, 249-263. https://doi.org/10.1007/s11265-020-01610-6
  180. Xu, M., Li, C., Chen, Z., Wang, Z. and Guan, Z. (2018a), "Assessing visual quality of omnidirectional videos", IEEE Transact. Circuits Syst. Video Technol., 29(12), 3516-3530. https://doi.org/10.1109/TCSVT.2018.2886277
  181. Xu, M., Li, T., Wang, Z., Deng, X., Yang, R. and Guan, Z. (2018b), "Reducing complexity of HEVC: A deep learning approach", IEEE Transact. Image Process., 27(10), 5044-5059. https://doi.org/10.1109/TIP.2018.2847035
  182. Xu, L., Jiang, S. and Zou, Q. (2020a), "An in silico approach to identification, categorization and prediction of nucleic acid binding proteins", Brief. Bioinform., 22(3), bbaa171. https://doi.org/10.1093/bib/bbaa171
  183. Xu, M., Li, C., Zhang, S. and Le Callet, P. (2020b), "State-of-the-art in 360 video/image processing: Perception, assessment and compression", IEEE J. Sel. Top. Signal Process., 14(1), 5-26. https://doi.org/10.1109/JSTSP.2020.2966864
  184. Xu, P., Lu, W., Zhang, J. and Zhang, L. (2020c), "Efficient hydrolysis of ammonia borane for hydrogen evolution catalyzed by plasmonic Ag@ Pd core-shell nanocubes", ACS Sustain. Chem. Eng., 8(33), 12366-12377. https://doi.org/10.1021/acssuschemeng.0c02276
  185. Xu, S., Wang, J., Shou, W., Ngo, T., Sadick, A.-M. and Wang, X. (2020d), "Computer vision techniques in construction: A critical review", Arch. Computat. Methods Eng., 1-15. https://doi.org/10.1007/s11831-020-09504-3
  186. Xue, Q., Zhu, Y. and Wang, J. (2019), "Joint distribution estimation and Naive Bayes classification under local differential privacy", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2019.2959581
  187. Yan, H., Xue, X., Chen, W., Wu, X., Dong, J., Liu, Y. and Wang, Z. (2020), "Reversible Na+ insertion/extraction in conductive polypyrrole-decorated NaTi2(PO4)3 nanocomposite with outstanding electrochemical property", Appl. Surf. Sci., 530, 147295. https://doi.org/10.1016/j.apsusc.2020.147295
  188. Yang, Y., Yao, J., Wang, C., Gao, Y., Zhang, Q., An, S. and Song, W. (2015), "New pore space characterization method of shale matrix formation by considering organic and inorganic pores", J. Natural Gas Sci. Eng., 27, 496-503. https://doi.org/10.1016/j.jngse.2015.08.017
  189. Yang, R., Xu, M., Liu, T., Wang, Z. and Guan, Z. (2018), "Enhancing quality for HEVC compressed videos", IEEE Transact. Circuits Syst. Video Technol., 29(7), 2039-2054. https://doi.org/10.1109/TCSVT.2018.2867568
  190. Yang, C., Gao, F. and Dong, M. (2020a), "Energy efficiency modeling of integrated energy system in coastal areas", J. Coast. Res., 103(SI), 995-1001. https://doi.org/10.2112/SI103-207.1
  191. Yang, W., Zhao, Y., Wang, D., Wu, H., Lin, A. and He, L. (2020b), "Using principal components analysis and IDW interpolation to determine spatial and temporal changes of surface water quality of Xin'anjiang river in Huangshan, China", Int. J. Environ. Res. Public Health, 17(8), 2942. https://doi.org/10.3390/ijerph17082942
  192. Yang, Y., Liu, J., Yao, J., Kou, J., Li, Z., Wu, T., Zhang, K., Zhang, L. and Sun, H. (2020c), "Adsorption behaviors of shale oil in kerogen slit by molecular simulation", Chem. Eng. J., 387, 124054. https://doi.org/10.1016/j.cej.2020.124054
  193. Yang, Z., Xu, P., Wei, W., Gao, G., Zhou, N. and Wu, G. (2020d), "Influence of the crosswind on the pantograph arcing dynamics", IEEE Transact. Plasma Sci., 48(8), 2822-2830. https://doi.org/10.1109/TPS.2020.3010553
  194. Youssef, A.M., Pradhan, B. and Hassan, A.M. (2011), "Flash flood risk estimation along the St. Katherine road, southern Sinai, Egypt using GIS based morphometry and satellite imagery", Environ. Earth Sci., 62(3), 611-623. https://doi.org/10.1007/s12665-010-0551-1
  195. Yu, H., Zhu, X., Qian, G., Gong, X. and Nie, X. (2020), "Evaluation of phosphorus slag (PS) content and particle size on the performance modification effect of asphalt", Constr. Build. Mater., 256, 119334. https://doi.org/10.1016/j.conbuildmat.2020.119334
  196. Zhang, W. (2020), "Parameter adjustment strategy and experimental development of hydraulic system for wave energy power generation", Symmetry, 12(5), 711. https://doi.org/10.3390/sym12050711
  197. Zhang, J. and Liu, B. (2019), "A review on the recent developments of sequence-based protein feature extraction methods", Curr. Bioinform., 14(3), 190-199. https://doi.org/10.2174/1574893614666181212102749
  198. Zhang, C. and Mousavi, A.A. (2020), "Blast loads induced responses of RC structural members: State-of-the-art review", Compos. Part B: Eng., 195, 108066. https://doi.org/10.1016/j.compositesb.2020.108066
  199. Zhang, C. and Wang, H. (2020), "Swing vibration control of suspended structures using the Active Rotary Inertia Driver system: Theoretical modeling and experimental verification", Struct. Control Health Monitor., 27(6), e2543. https://doi.org/10.1002/stc.2543
  200. Zhang, K., Wang, Q., Chao, L., Ye, J., Li, Z., Yu, Z., Yang, T. and Ju, Q. (2019), "Ground observation-based analysis of soil moisture spatiotemporal variability across a humid to semi-humid transitional zone in China", J. Hydrol., 574, 903-914. https://doi.org/10.1016/j.jhydrol.2019.04.087
  201. Zhang, C., Abedini, M. and Mehrmashhadi, J. (2020a), "Development of pressure-impulse models and residual capacity assessment of RC columns using high fidelity Arbitrary Lagrangian-Eulerian simulation", Eng. Struct., 224, 111219. https://doi.org/10.1016/j.engstruct.2020.111219
  202. Zhang, C., Gholipour, G. and Mousavi, A.A. (2020b), "State-of-the-art review on responses of RC structures subjected to lateral impact loads", Arch. Comput. Methods Eng., 1-31. https://doi.org/10.1007/s11831-020-09467-5
  203. Zhang, K., Ruben, G.B., Li, X., Li, Z., Yu, Z., Xia, J. and Dong, Z. (2020c), "A comprehensive assessment framework for quantifying climatic and anthropogenic contributions to streamflow changes: A case study in a typical semi-arid North China basin", Environ. Modell. Softw., 128, 104704. https://doi.org/10.1016/j.envsoft.2020.104704
  204. Zhang, T., He, X., Deng, Y., Tsang, D.C., Jiang, R., Becker, G.C. and Kruse, A. (2020d), "Phosphorus recovered from digestate by hydrothermal processes with struvite crystallization and its potential as a fertilizer", Sci. Total Environ., 698, 134240. https://doi.org/10.1016/j.scitotenv.2019.134240
  205. Zhang, T., He, X., Deng, Y., Tsang, D. C., Yuan, H., Shen, J. and Zhang, S. (2020e), "Swine manure valorization for phosphorus and nitrogen recovery by catalytic-thermal hydrolysis and struvite crystallization", Sci. Total Environ., 729, 138999. https://doi.org/10.1016/j.scitotenv.2020.138999
  206. Zhao, X., Peng, X., Zhao, T., Yang, L. and Shu, Y. (2019), "Preparation and Electrochemical Properties of Multi-Walled Carbon Nanotube/Dextran/Nano-Gold Composites", Nanosci. Nanotechnol. Lett., 11(10), 1404-1409. https://doi.org/10.1166/nnl.2019.3018
  207. Zhao, J., Liu, J., Jiang, J. and Gao, F. (2020a), "Efficient Deployment with Geometric Analysis for mmWave UAV Communications", IEEE Wirel. Commun. Lett., 9(7), 1115-1119. 10.1109/LWC.2020.2982637
  208. Zhao, X., Ye, Y., Ma, J., Shi, P. and Chen, H. (2020b), "Construction of electric vehicle driving cycle for studying electric vehicle energy consumption and equivalent emissions", Environ. Sci. Pollut. Res., 27, 37395-37409. https://doi.org/10.1007/s11356-020-09094-4
  209. Zhao, X., Zhao, X., Yu, Q., Ye, Y. and Yu, M. (2020c), "Development of a representative urban driving cycle construction methodology for electric vehicles: A case study in Xi'an", Transport. Res. Part D: Transport Environ., 81, 102279. https://doi.org/10.1016/j.trd.2020.102279
  210. Zheng, J., Zhang, C. and Li, A. (2020), "Experimental investigation on the mechanical properties of curved metallic plate dampers", Appl. Sci., 10(1), 269. https://doi.org/10.3390/app10010269
  211. Zhong, P.-F., Lin, H.-M., Wang, L.-W., Mo, Z.-Y., Meng, X.-J., Tang, H.-T. and Pan, Y.-M. (2020), "Electrochemically enabled synthesis of sulfide imidazopyridines via a radical cyclization cascade", Green Chem., 22(19), 6334-6339. https://doi.org/10.1039/D0GC02125C
  212. Zhu, Q. (2019), "Research on road traffic situation awareness system based on image big data", IEEE Intell. Syst., 35(1), 18-26. https://doi.org/10.1109/MIS.2019.2942836
  213. Zhu, B., Su, B. and Li, Y. (2018a), "Input-output and structural decomposition analysis of India's carbon emissions and intensity, 2007/08-2013/14", Appl. Energy, 230, 1545-1556. https://doi.org/10.1016/j.apenergy.2018.09.026
  214. Zhu, J., Shi, Q., Wu, P., Sheng, Z. and Wang, X. (2018b), "Complexity analysis of prefabrication contractors' dynamic price competition in mega projects with different competition strategies", Complexity, 2018. https://doi.org/10.1155/2018/5928235
  215. Zhu, J., Wang, X., Chen, M., Wu, P. and Kim, M.J. (2019a), "Integration of BIM and GIS: IFC geometry transformation to shapefile using enhanced open-source approach", Automat. Constr., 106, 102859. https://doi.org/10.1016/j.autcon.2019.102859
  216. Zhu, J., Wang, X., Wang, P., Wu, Z. and Kim, M.J. (2019b), "Integration of BIM and GIS: Geometry from IFC to shapefile using open-source technology", Automat. Constr., 102, 105-119. https://doi.org/10.1016/j.autcon.2019.02.014
  217. Zhu, G., Wang, S., Sun, L., Ge, W. and Zhang, X. (2020a), "Output feedback adaptive dynamic surface sliding-mode control for quadrotor UAVs with tracking error constraints", Complexity, 2020. https://doi.org/10.1155/2020/8537198
  218. Zhu, J., Wu, P., Chen, M., Kim, M. J., Wang, X. and Fang, T. (2020b), "Automatically processing IFC clipping representation for BIM and GIS integration at the process level", Appl. Sci., 10(6), 2009. https://doi.org/10.3390/app10062009
  219. Zuo, C., Li, J., Sun, J., Fan, Y., Zhang, J., Lu, L., Zhang, R., Wang, B., Huang, L. and Chen, Q. (2020a), "Transport of intensity equation: a tutorial", Opt. Las. Eng., 135, 106187. https://doi.org/10.1016/j.optlaseng.2020.106187
  220. Zuo, C., Sun, J., Li, J., Asundi, A. and Chen, Q. (2020b), "Wide-field high-resolution 3d microscopy with fourier ptychographic diffraction tomography", Opt. Las. Eng., 128, 106003. https://doi.org/10.1016/j.optlaseng.2020.106003
  221. Zuo, X., Dong, M., Gao, F. and Tian, S. (2020c), "The modeling of the electric heating and cooling system of the integrated energy system in the coastal area", J. Coast. Res., 103(SI), 1022-1029. https://doi.org/10.2112/SI103-213.1