DOI QR코드

DOI QR Code

Influence of crack on the permeability of plastic concrete

  • He, Yongqiang (Yiwu Industrial & Commercial College) ;
  • Alyousef, Rayed (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Alaskar, Abdulaziz (Department of Civil Engineering, College of Engineering, King Saud University) ;
  • Alabduljabbar, Hisham (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Mohamed, Abdeliazim Mustafa (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Maureira-Carsalade, Nelson (Facultad de Ingenieria, Universidad Catolica de la Santisima Concepcion) ;
  • Roco-Videla, Angel (Programa Magister en ciencias quimico-biologicas, Facultad de Ciencias de la Salud, Universidad Bernardo O'Higgins) ;
  • Issakhov, Alibek (Al-Farabi Kazakh National University) ;
  • Assilzadeh, Hamid (Institute of Research and Development, Duy Tan University)
  • 투고 : 2019.12.05
  • 심사 : 2021.03.12
  • 발행 : 2021.05.25

초록

This study examined the relations between permeability of the concrete due to addition of new cracks. The different concrete types analyzed were standard concrete, reinforced steel fiber concrete, and reinforced concrete polypropylene fiber. In consideration of the improved polypropylene content of polypropylene fiber reinforced concrete, the crack diameter was decreased by 72-93% for up to 0.25% fiber and cracks were eliminated with 0.3% fiber inclusion. In terms of steel fiber-reinforced concrete, the results showed that steel reinforcing macro fibers decrease the permeability of cracked concrete at wider crack widths. While the permeability of unreinforced concrete was the highest, 0.5% steel content resulted in lower permeability while a higher steel content concrete with 1% steel had the lowest permeability. Crack stitching phenomenon and the effect of multiple cracks may be attributed to the decrease in the permeability. With respect to normal concrete, the findings showed the crack opening displacement at the highest tension is less than 20 microns. At this loading stage, after unloading, around 80% of the displacement is restored and the residual crack opening is notably small, indicating the low impact of cracking on concrete permeability (CP) and showing that CP was increased with crack width. As a result, adding polypropylene aggregate to concrete could significantly reduce the width of crack, while adding steel fiber to concrete reduces the permeability of cracked concrete compared to normal concrete which may result in a minor crack on CP.

키워드

참고문헌

  1. Abedini, M. and Zhang, C. (2020a), "Dynamic performance of concrete columns retrofitted with FRP using segment pressure technique", Compos. Struct., 260, 113473. https://doi.org/10.1016/j.compstruct.2020.113473
  2. Abedini, M. and Zhang, C. (2020b), "Performance assessment of concrete and steel material models in ls-dyna for enhanced numerical simulation, a state of the art review", Arch. Computat. Methods Eng., 1-22. https://doi.org/10.1007/s11831-020-09483-5
  3. Abedini, M., Mutalib, A.A., Zhang, C., Mehrmashhadi, J., Raman, S.N., Alipour, R., Momeni, T. and Mussa, M.H. (2020a), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", Front. Struct. Civil Eng., 14(2), 532-553. https://doi.org/10.1007/s11709-020-0604-9
  4. Abedini, M., Zhang, C., Mehrmashhadi, J. and Akhlaghi, E. (2020b), "Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column", Structures, 28, 456-466. https://doi.org/10.1016/j.istruc.2020.08.084
  5. Afrazi, M. and Rouhanifar, S. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civil Eng. J., 19(4), 83-96.
  6. Afrazi, M., Yazdani, M. and Fakhimi, A. (2017a), "The numerical study of effect of an oversize particle on the shear strength of sand in direct shear test", Proceedings of the 4th International Conference on Recent Innovations in Civil Engineering, Architecture, and Urban Palnning.
  7. Afrazi, M., Yazdani, M. and Fakhimi, A. (2017b), "The numerical study of effect of an oversize particle on the shear strength of sand in Triaxial test", Proceedings of the 4th International Conference on Recent Innovations in Civil Engineering, Architecture, and Urban Palnning.
  8. Afrazi, M., Yazdani, M., Alitalesh, M. and Fakhimi, A. (2018), "Numerical analysis of effective parameters in direct shear test by hybrid discrete - finite element method", Modares Civil Eng. J., 18(3), 13-24.
  9. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034
  10. Afsar Dizaj, E., Fanaie, N. and Zarifpour, A. (2018), "Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained braces", Adv. Struct. Eng., 21(7), 1002-1020. https://doi.org/10.1177/1369433217737115
  11. Al-khafaji, A. (2019), "Some Results of Differential Subordination and Differential Superordination Theorems for Univalent Functions Defined by Ruscheweyh Derivative Operator", J. Adv. Eng. Computat., 3(2). https://doi.org/10.25073/jaec.201932.237
  12. Al Kajbaf, A., Fanaie, N. and Najarkolaie, K.F. (2018), "Numerical simulation of failure in steel posttensioned connections under cyclic loading", Eng. Fail. Anal., 91, 35-57. https://doi.org/10.1016/j.engfailanal.2018.04.024
  13. Alam, Z., Sun, L., Zhang, C., Su, Z. and Samali, B. (2020a), "Experimental and numerical investigation on the complex behaviour of the localised seismic response in a multi-storey plan-asymmetric structure", Struct. Infrastruct. Eng., 17(1), 86-102. https://doi.org/10.1080/15732479.2020.1730914
  14. Alam, Z., Zhang, C. and Samali, B. (2020b), "Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure", Struct. Des. Tall Special Build., 29(2), e1750. https://doi.org/10.1002/tal.1750
  15. Alam, Z., Zhang, C. and Samali, B. (2020c), "The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures", Earthq. Eng. Eng. Vib., 19(1), 223-237. https://doi.org/10.1007/s11803-020-0558-x
  16. Alaskar, A., Shah, S., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020a), "Development of Pozzolanic material from clay", Adv. Concrete Constr., Int. J., 10(4), 301-310. https://doi.org/10.12989/acc.2020.10.4.301
  17. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L. S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020b), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., Int. J., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187
  18. Aldea, C.-M., Shah, S.P. and Karr, A. (1999), "Permeability of cracked concrete", Mater. Struct., 32(5), 370-376. https://doi.org/10.1007/BF02479629
  19. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., Int. J., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147
  20. Arif, M.Z., Ahmed, R., Sadia, U.H., Tultul, M.S.I. and Chakma, R. (2020), "Decision Tree Method Using for Fetal State Classification from Cardiotography Data", J. Adv. Eng. Computat., 4(1). https://doi.org/10.25073/jaec.202041.273
  21. Asadolahi, S.M. and Fanaie, N. (2020), "Performance of self-centering steel moment frame considering stress relaxation in prestressed cables", Adv. Struct. Eng., 1369433219900940. https://doi.org/10.1177/1369433219900940
  22. Bahadori, A. and Ghassemieh, M. (2016), "Seismic evaluation of I-shaped beam to box-column connections with top and seat plates by the component method."
  23. Bahri, H. and Harrag, A. (2018), "Variable Step Size P&O MPPT Controller to Improve Static and Dynamic PV System Performances", J. Adv. Eng. Computat., 2(2) https://doi.org/10.25073/jaec.201822.94
  24. Bai, B., Guo, Z., Zhou, C., Zhang, W. and Zhang, J. (2021), "Application of adaptive reliability importance sampling-based extended domain PSO on single mode failure in reliability engineering", Inform. Sci., 546, 42-59. https://doi.org/10.1016/j.ins.2020.07.069
  25. Bao, J., Li, S., Zhang, P., Xue, S., Cui, Y. and Zhao, T. (2020a), "Influence of exposure environments and moisture content on water repellency of surface impregnation of cement-based materials", J. Mater. Res. Technol., 9(6), 12115-12125. https://doi.org/10.1016/j.jmrt.2020.08.046
  26. Bao, J., Xue, S., Zhang, P., Dai, Z. and Cui, Y. (2020b), "Coupled effects of sustained compressive loading and freeze-thaw cycles on water penetration into concrete", Struct. Concrete, 22, E944-E954. https://doi.org/10.1002/suco.201900200
  27. Cai, C., Wu, X., Liu, W., Zhu, W., Chen, H., Qiu, J.C.D., Sun, C.- N., Liu, J., Wei, Q. and Shi, Y. (2020), "Selective laser melting of near-α titanium alloy Ti-6Al-2Zr-1Mo-1V: Parameter optimization, heat treatment and mechanical performance", J. Mater. Sci. Technol., 57, 51-64. https://doi.org/10.1016/j.jmst.2020.05.004
  28. Cao, L. (2020), "Changing Port Governance Model: Port Spatial Structure and Trade Efficiency", J. Coastal Res., 95(SI), 963-968. https://doi.org/10.2112/SI95-187.1
  29. Cao, B., Dong, W., Lv, Z., Gu, Y., Singh, S. and Kumar, P. (2020a), "Hybrid microgrid many-objective sizing optimization with fuzzy decision", IEEE Transact. Fuzzy Syst., 28(11), 2702-2710. https://doi.org/10.1109/TFUZZ.2020.3026140
  30. Cao, B., Zhao, J., Lv, Z., Gu, Y., Yang, P. and Halgamuge, S.K. (2020b), "Multiobjective Evolution of Fuzzy Rough Neural Network via Distributed Parallelism for Stock Prediction", IEEE Transact. Fuzzy Syst., 28(5), 939-952. https://doi.org/10.1109/TFUZZ.2020.2972207
  31. Cao, Y., Alyousef, R., Baharom, S., Shah, S., Alaskar, A., Alabduljabbar, H., Mustafa Mohamed, A. and Assilzadeh, H. (2020c), "Dynamic attainment of mixed aspect ratio for concrete members reinforced with steel fiber under impact loading", Mech. Adv. Mater. Struct., 1-10. https://doi.org/10.1080/15376494.2020.1847371
  32. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020d), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Structures, 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031
  33. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020e), "Application of extreme learning machine in behavior of beam to column connections", Structures, 25, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058
  34. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020f), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., Int. J., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567
  35. Chao, M., Kai, C. and Zhiwei, Z. (2020), "Research on tobacco foreign body detection device based on machine vision", Transact. Inst. Measure. Control, 42(15), 2857-2871. https://doi.org/10.1177/0142331220929816
  36. Che-Ngoc, H., Pham-Chau, A.-T. and Bora, D.J. (2018), "A New Fuzzy Rule Based Contrast Enhancement Method using The Two-Steps Automatic Clustering Algorithm", J. Adv. Eng. Computat., 2(4), 239-250. http://dx.doi.org/10.25073/jaec.201824.214
  37. Chen, Y., He, L., Guan, Y., Lu, H. and Li, J. (2017), "Life cycle assessment of greenhouse gas emissions and water-energy optimization for shale gas supply chain planning based on multi-level approach: Case study in Barnett, Marcellus, Fayetteville, and Haynesville shales", Energy Convers. Manage., 134, 382-398. https://doi.org/10.1016/j.enconman.2016.12.019
  38. Chen, Y., He, L., Li, J. and Zhang, S. (2018), "Multi-criteria design of shale-gas-water supply chains and production systems towards optimal life cycle economics and greenhouse gas emissions under uncertainty", Comput. Chem. Eng., 109, 216-235. https://doi.org/10.1016/j.compchemeng.2017.11.014
  39. Chen, H., Qiao, H., Xu, L., Feng, Q. and Cai, K. (2019a), "A fuzzy optimization strategy for the implementation of RBF LSSVR model in vis-NIR analysis of pomelo maturity", IEEE Transact. Indust. Inform., 15(11), 5971-5979. https://doi.org/10.1109/TII.2019.2933582
  40. Chen, X., Wang, D., Wang, T., Yang, Z., Zou, X., Wang, P., Luo, W., Li, Q., Liao, L. and Hu, W. (2019b), "Enhanced photoresponsivity of a GaAs nanowire metal-semiconductor-metal photodetector by adjusting the fermi level", ACS Appl. Mater. Interf., 11(36), 33188-33193. https://doi.org/10.1021/acsami.9b07891
  41. Chen, C., Wang, X., Wang, Y., Yang, D., Yao, F., Zhang, W., Wang, B., Sewvandi, G.A., Yang, D. and Hu, D. (2020a), "Additive Manufacturing of Piezoelectric Materials", Adv. Function. Mater., 30(52), 2005141. https://doi.org/10.1002/adfm.202005141
  42. Chen, H., Chen, A., Xu, L., Xie, H., Qiao, H., Lin, Q. and Cai, K. (2020b), "A deep learning CNN architecture applied in smart near-infrared analysis of water pollution for agricultural irrigation resources", Agricul. Water Manage., 240, 106303. https://doi.org/10.1016/j.agwat.2020.106303
  43. Chen, H., Zhang, G., Fan, D., Fang, L. and Huang, L. (2020c), "Nonlinear lamb wave analysis for microdefect identification in mechanical structural health assessment", Measurement, 108026. https://doi.org/10.1016/j.measurement.2020.108026
  44. Chen, J., Liu, G. and Liu, Y. (2020d), "Lightweight privacy-preserving raw data publishing scheme", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2020.2974183
  45. Chen, Z., Wang, J., Ma, K., Huang, X. and Wang, T. (2020e), "Fuzzy adaptive two-bits-triggered control for nonlinear uncertain system with input saturation and output constraint", Int. J. Adapt. Control Signal Process., 34(4), 543-559. https://doi.org/10.1002/acs.3098
  46. Chen, F., Zhong, Y., Gao, X., Jin, Z., Wang, E., Zhu, F., Shao, X. and He, X. (2021a), "Non-uniform model of relationship between surface strain and rust expansion force of reinforced concrete."
  47. Chen, Y., Li, J., Lu, H. and Yan, P. (2021b), "Coupling system dynamics analysis and risk aversion programming for optimizing the mixed noise-driven shale gas-water supply chains", J. Cleaner Product., 278, 123209. https://doi.org/10.1016/j.jclepro.2020.123209
  48. Cheng, H. and Liu, Y. (2020), "An improved RSU-based authentication scheme for VANET", J. Internet Technol., 21(4), 1137-1150.
  49. Cheng, X., He, L., Lu, H., Chen, Y. and Ren, L. (2016), "Optimal water resources management and system benefit for the Marcellus shale-gas reservoir in Pennsylvania and West Virginia", J. Hydrol., 540, 412-422. https://doi.org/10.1016/j.jhydrol.2016.06.041
  50. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., Int. J., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141
  51. Deng, Y., Zhang, T., Sharma, B.K. and Nie, H. (2019), "Optimization and mechanism studies on cell disruption and phosphorus recovery from microalgae with magnesium modified hydrochar in assisted hydrothermal system", Sci. Total Environ., 646, 1140-1154. https://doi.org/10.1016/j.scitotenv.2018.07.369
  52. Desmettre, C. and Charron, J.-P. (2012), "Water permeability of reinforced concrete with and without fiber subjected to static and constant tensile loading", Cement Concrete Res., 42(7), 945-952. https://doi.org/10.1016/j.cemconres.2012.03.014
  53. Desmettre, C. and Charron, J.-P. (2013), "Water Permeability of Reinforced Concrete Subjected to Cyclic Tensile Loading", ACI Mater. J., 110(1).
  54. Ding, L., Li, S., Gao, H., Liu, Y.-J., Huang, L. and Deng, Z. (2019), "Adaptive neural network-based finite-time online optimal tracking control of the nonlinear system with dead zone", IEEE Transact. Cybernet, 51(1), 382-392. https://doi.org/10.1109/TCYB.2019.2939424
  55. Dinh-Cong, D., Keykhosravi, M.H., Alyousef, R., Salih, M.N., Nguyen, H., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Poi-Ngian, S. (2019), "The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate", Smart Struct. Syst., Int. J., 24(4), 541-552. https://doi.org/10.12989/sss.2019.24.4.541
  56. Fanaie, N. and Ezzatshoar, S. (2014), "Studying the seismic behavior of gate braced frames by incremental dynamic analysis (IDA)", J. Constr. Steel Res., 99, 111-120. https://doi.org/10.1016/j.jcsr.2014.04.008
  57. Fanaie, N. and Moghadam, H.S. (2019), "Experimental study of rigid connection of drilled beam to CFT column with external stiffeners", J. Constr. Steel Res., 153, 209-221. https://doi.org/10.1016/j.jcsr.2018.10.016
  58. Fanaie, N. and Tahriri, M. (2017), "Stability and stiffness analysis of a steel frame with an oblique beam using method of least work", J. Constr. Steel Res., 137, 342-357. https://doi.org/10.1016/j.jcsr.2017.06.032
  59. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int. J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485
  60. Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382
  61. Fanaie, N., Kazerani, S. and Soroushnia, S. (2017), "Numerical study of slotted web drilled flange moment frame connection", Int. J. Numer. Methods Civil Eng., 1(3), 16-23. https://doi.org/10.29252/nmce.1.3.16
  62. Fanaie, N., Faegh, S.S. and Partovi, F. (2019), "An improved and innovative formulation for calculating amplified elastic story drift induced by RBS connections in steel moment frames", J. Constr. Steel Res., 160, 510-527. https://doi.org/10.1016/j.jcsr.2019.06.003
  63. Feng, Q., Li, Y., Wang, N., Hao, Y., Chang, J., Wang, Z., Zhang, X., Zhang, Z. and Wang, L. (2020), "A biomimetic nanogenerator of reactive nitrogen species based on battlefield transfer strategy for enhanced immunotherapy", Small, 16(25), 2002138. https://doi.org/10.1002/smll.202002138
  64. Fu, X., Pace, P., Aloi, G., Yang, L. and Fortino, G. (2020), "Topology optimization against cascading failures on wireless sensor networks using a memetic algorithm", Computer Networks, 177, 107327. https://doi.org/10.1016/j.comnet.2020.107327
  65. Gao, N. and Lu, K. (2020), "An underwater metamaterial for broadband acoustic absorption at low frequency", Appl. Acoust., 169, 107500. https://doi.org/10.1016/j.apacoust.2020.107500
  66. Gao, N. and Zhang, Y. (2019), "A low frequency underwater metastructure composed by helix metal and viscoelastic damping rubber", J. Vib. Control, 25(3), 538-548. https://doi.org/10.1177/1077546318788446
  67. Gao, N., Wu, J.H., Yu, L. and Hou, H. (2016), "Ultralow frequency acoustic bandgap and vibration energy recovery in tetragonal folding beam phononic crystal", Int. J. Modern Phys. B, 30(18), 1650111. https://doi.org/10.1142/S0217979216501113
  68. Gao, N., Luo, D., Cheng, B. and Hou, H. (2020), "Teaching-learning-based optimization of a composite metastructure in the 0-10 kHz broadband sound absorption range", J. Acoust. Soc. Am., 148(2), EL125-EL129. https://doi.org/10.1121/10.0001678
  69. Gao, N., Guo, X., Deng, J., Cheng, B. and Hou, H. (2021a), "Elastic wave modulation of double-leaf ABH beam embedded mass oscillator", Appl. Acoust., 173, 107694. https://doi.org/10.1016/j.apacoust.2020.107694
  70. Gao, N., Wang, B., Lu, K. and Hou, H. (2021b), "Complex band structure and evanescent Bloch wave propagation of periodic nested acoustic black hole phononic structure", Appl. Acoust., 177, 107906. https://doi.org/10.1016/j.apacoust.2020.107906
  71. Ghassemieh, M. and Bahadori, A. (2015), "Seismic evaluation of a steel moment frame with cover plate connection considering flexibility by component method", Proceedings of the 2015 world congress on Advances in Structural Engineering and Mechanics, Incheon, Korea.
  72. Gholipour, G., Zhang, C. and Mousavi, A.A. (2020a), "Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collision", Marine Struct., 69, 102662. https://doi.org/10.1016/j.marstruc.2019.102662
  73. Gholipour, G., Zhang, C. and Mousavi, A.A. (2020b), "Numerical analysis of axially loaded RC columns subjected to the combination of impact and blast loads", Eng. Struct., 219, 110924. https://doi.org/10.1016/j.engstruct.2020.110924
  74. Guan, Z., Xing, Q., Xu, M., Yang, R., Liu, T. and Wang, Z. (2019), "MFQE 2.0: A new approach for multi-frame quality enhancement on compressed video", IEEE Transact. Pattern Anal. Mach. Intell., 43(3), 949-963. https://doi.org/10.1109/TPAMI.2019.2944806
  75. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081
  76. Han, X., Chen, N., Yan, J., Liu, J., Liu, M. and Karellas, S. (2019), "Thermodynamic analysis and life cycle assessment of supercritical pulverized coal-fired power plant integrated with No. 0 feedwater pre-heater under partial loads", J. Cleaner Product., 233, 1106-1122. https://doi.org/10.1016/j.jclepro.2019.06.159
  77. Han, X., Zhang, D., Yan, J., Zhao, S. and Liu, J. (2020), "Process development of flue gas desulphurization wastewater treatment in coal-fired power plants towards Zero Liquid Discharge: Energetic, economic and environmental analyses", J. Cleaner Product., 261, 121144. https://doi.org/10.1016/j.jclepro.2020.121144
  78. Hannawi, K., Bian, H., Prince-Agbodjan, W. and Raghavan, B. (2016), "Effect of different types of fibers on the microstructure and the mechanical behavior of ultra-high performance fiber-reinforced concretes", Compos. Part B: Eng., 86, 214-220. https://doi.org/10.1016/j.compositesb.2015.09.059
  79. He, L., Chen, Y. and Li, J. (2018a), "A three-level framework for balancing the tradeoffs among the energy, water, and air-emission implications within the life-cycle shale gas supply chains", Resour. Conserv. Recycl., 133, 206-228. https://doi.org/10.1016/j.resconrec.2018.02.015
  80. He, L., Chen, Y., Zhao, H., Tian, P., Xue, Y. and Chen, L. (2018b), "Game-based analysis of energy-water nexus for identifying environmental impacts during Shale gas operations under stochastic input", Sci. Total Environ., 627, 1585-1601. https://doi.org/10.1016/j.scitotenv.2018.02.004
  81. He, L., Shao, F. and Ren, L. (2020a), "Sustainability appraisal of desired contaminated groundwater remediation strategies: an information-entropy-based stochastic multi-criteria preference model", Environ. Develop. Sustain., 23, 1759-1779. https://doi.org/10.1007/s10668-020-00650-z
  82. He, S., Guo, F. and Zou, Q. (2020b), "MRMD2. 0: A Python Tool for Machine Learning with Feature Ranking and Reduction", Current Bioinform., 15(10), 1213-1221. https://doi.org/10.2174/1574893615999200503030350
  83. Hinchberger, S., Weck, J. and Newson, T. (2010), "Mechanical and hydraulic characterization of plastic concrete for seepage cut-off walls", Can. Geotech. J., 47(4), 461-471. https://doi.org/10.1139/T09-103
  84. Hu, Y., Chen, Q., Feng, S. and Zuo, C. (2020), "Microscopic fringe projection profilometry: A review", Optics Lasers Eng., 106192. https://doi.org/10.1016/j.optlaseng.2020.106192
  85. Huang, H., Huang, M., Zhang, W., Pospisil, S. and Wu, T. (2020a), "Experimental Investigation on Rehabilitation of Corroded RC Columns with BSP and HPFL under Combined Loadings", J. Struct. Eng., 146(8), 04020157. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002725
  86. Huang, J., Alyousef, R., Suhatril, M., Baharom, S., Alabduljabbar, H., Alaskar, A. and Assilzadeh, H. (2020b), "Influence of porosity and cement grade on concrete mechanical properties", Adv. Concrete Constr., Int. J., 10(5), 393-402. https://doi.org/10.12989/acc.2020.10.5.393
  87. Huang, Y., Wang, J., Wang, F. and He, B. (2020c), "Eventt-riggered adaptive finite-time tracking control for full state constraints nonlinear systems with parameter uncertainties and given transient performance", ISA Transactions, 108, 131-143. https://doi.org/10.1016/j.isatra.2020.08.022
  88. Huang, Z., Zheng, H., Guo, L. and Mo, D. (2020d), "Influence of the position of artificial boundary on computation accuracy of conjugated infinite element for a finite length cylindrical shell", Acoust. Australia, 48(2), 287-294. https://doi.org/10.1007/s40857-020-00175-5
  89. Hubert, M., Desmettre, C. and Charron, J.-P. (2015), "Influence of fiber content and reinforcement ratio on the water permeability of reinforced concrete", Mater. Struct., 48(9), 2795-2807. https://doi.org/10.1617/s11527-014-0354-z
  90. Huo, S.-Y., Huang, H.-B., Wang, L.-J. and Chen, J.-J. (2021), "Deterministic interface modes in two-dimensional acoustic systems", Int. J. Modern Phys. B, 35(1), 2150010. https://doi.org/10.1142/S0217979221500107
  91. ICOLD (1985), Filling Materials: For Watertight Cut Off Walls, CIGB/ICOLD.
  92. Islam, G.S. and Gupta, S.D. (2016), "Evaluating plastic shrinkage and permeability of polypropylene fiber reinforced concrete", Int. J. Sustain. Built Environ., 5(2), 345-354. https://doi.org/10.1016/j.ijsbe.2016.05.007
  93. Jia, L.-C., Jin, Y.-F., Ren, J.-W., Zhao, L.-H., Yan, D.-X. and Li, Z.-M. (2021), "Highly thermally conductive liquid metal-based composites with superior thermostability for thermal management", J. Mater. Chem. C, 9(8), 2904-2911. https://doi.org/10.1039/D0TC05493C
  94. Jiang, Q., Shao, F., Gao, W., Chen, Z., Jiang, G. and Ho, Y.-S. (2018), "Unified no-reference quality assessment of singly and multiply distorted stereoscopic images", IEEE Transact. Image Process., 28(4), 1866-1881. https://doi.org/10.1109/TIP.2018.2881828
  95. Jiao, S.-q., Jiao, H.-d., Song, W.-l., Wang, M.-y. and Tu, J.-g. (2020a), "A review on liquid metals as cathodes for molten salt/oxide electrolysis", Int. J. Minerals Metall. Mater., 27, 1588-1598. https://doi.org/10.1007/s12613-020-1971-x
  96. Jiao, S.-q., Wang, M.-y. and Song, W.-l. (2020b), "Editorial for special issue on high-temperature molten salt chemistry and technology", Int. J. Minerals Metall. Mater., 27(12), 1569-1571. https://doi.org/10.1007/s12613-020-2225-7
  97. Ju, Y., Shen, T. and Wang, D. (2020), "Bonding behavior between reactive powder concrete and normal strength concrete", Constr. Build. Mater., 242, 118024. https://doi.org/10.1016/j.conbuildmat.2020.118024
  98. Kordestani, H., Zhang, C. and Shadabfar, M. (2020), "Beam damage detection under a moving load using random decrement technique and Savitzky-Golay Filter", Sensors, 20(1), 243. https://doi.org/10.3390/s20010243
  99. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019a), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., Int. J., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207
  100. Li, T., Xu, M., Zhu, C., Yang, R., Wang, Z. and Guan, Z. (2019b), "A deep learning approach for multi-frame in-loop filter of HEVC", IEEE Transact. Image Process., 28(11), 5663-5678. https://doi.org/10.1109/TIP.2019.2921877
  101. Li, B.-H., Liu, Y., Zhang, A.-M., Wang, W.-H. and Wan, S. (2020a), "A Survey on Blocking Technology of Entity Resolution", J. Comput. Sci. Technol., 35(4), 769-793. https://doi.org/10.1007/s11390-020-0350-4
  102. Li, C., Sun, L., Xu, Z., Wu, X., Liang, T. and Shi, W. (2020b), "Experimental Investigation and Error Analysis of High Precision FBG Displacement Sensor for Structural Health Monitoring", Int. J. Struct. Stabil. Dyn., 20(6), 2040011. https://doi.org/10.1142/S0219455420400118
  103. Li, X., Zhang, R., Zhang, X., Zhu, P. and Yao, T. (2020c), "Silver-Catalyzed Decarboxylative Allylation of Difluoroarylacetic Acids with Allyl Sulfones in Water", Chem. - Asian J., 15(7), 1175-1179. https://doi.org/10.1002/asia.202000059
  104. Li, Z., Liu, H., Dun, Z., Ren, L. and Fang, J. (2020d), "Grouting effect on rock fracture using shear and seepage assessment", Constr. Build. Mater., 242, 118131. https://doi.org/10.1016/j.conbuildmat.2020.118131
  105. Liu, L. and Liu, S. (2020), "Integrated production and distribution problem of perishable products with a minimum total order weighted delivery time", Mathematics, 8(2), 146. https://doi.org/10.3390/math8020146
  106. Liu, J., Wu, C., Wu, G. and Wang, X. (2015), "A novel differential search algorithm and applications for structure design", Appl. Mathe. Computat., 268, 246-269. https://doi.org/10.1016/j.amc.2015.06.036
  107. Liu, S., Chan, F.T. and Ran, W. (2016), "Decision making for the selection of cloud vendor: An improved approach under group decision-making with integrated weights and objective/subjective attributes", Expert Syst. Applicat., 55, 37-47. https://doi.org/10.1016/j.eswa.2016.01.059
  108. Liu, G., Ren, G., Zhao, L., Cheng, L., Wang, C. and Sun, B. (2017), "Antibacterial activity and mechanism of bifidocin A against Listeria monocytogenes", Food Control, 73, 854-861. https://doi.org/10.1016/j.foodcont.2016.09.036
  109. Liu, Y., Hu, B., Wu, S., Wang, M., Zhang, Z., Cui, B., He, L. and Du, M. (2019), "Hierarchical nanocomposite electrocatalyst of bimetallic zeolitic imidazolate framework and MoS2 sheets for non-Pt methanol oxidation and water splitting", Appl. Catal. B: Environ., 258, 117970. https://doi.org/10.1016/j.apcatb.2019.117970
  110. Liu, C., Deng, X., Liu, J., Peng, T., Yang, S. and Zheng, Z. (2020a), "Dynamic response of saddle membrane structure under hail impact", Eng. Struct., 214, 110597. https://doi.org/10.1016/j.engstruct.2020.110597
  111. Liu, C., Wang, F., Deng, X., Pang, S., Liu, J., Wu, Y. and Xu, Z. (2020b), "Hailstone-induced dynamic responses of pretensioned umbrella membrane structure", Adv. Struct. Eng., 1369433220940149. https://doi.org/10.1177/1369433220940149
  112. Liu, C., Wang, F., He, L., Deng, X., Liu, J. and Wu, Y. (2020c), "Experimental and numerical investigation on dynamic responses of the umbrella membrane structure excited by heavy rainfall", J. Vib. Control, 27(5-6). https://doi.org/10.1177/1077546320932691
  113. Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020d), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., Int. J., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743
  114. Liu, J., Liu, Y. and Wang, X. (2020e), "An environmental assessment model of construction and demolition waste based on system dynamics: a case study in Guangzhou", Environ. Sci. Pollut. Res., 27(30), 37237-37259. https://doi.org/10.1007/s11356-019-07107-5
  115. Liu, J., Wang, C., Sun, H., Wang, H., Rong, F., He, L., Lou, Y., Zhang, S., Zhang, Z. and Du, M. (2020f), "CoOx/CoNy nanoparticles encapsulated carbon-nitride nanosheets as an efficiently trifunctional electrocatalyst for overall water splitting and Zn-air battery", Appl. Catal. B: Environ., 279, 119407. https://doi.org/10.1016/j.apcatb.2020.119407
  116. Liu, Q., Song, Z., Han, H., Donkor, S., Jiang, L., Wang, W. and Chu, H. (2020g), "A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves", Constr. Build. Mater., 260, 119695. https://doi.org/10.1016/j.conbuildmat.2020.119695
  117. Liu, S., Yu, W., Chan, F.T. and Niu, B. (2020h), "A variable weight-based hybrid approach for multi-attribute group decision making under interval-valued intuitionistic fuzzy sets", Int. J. Intell. Syst., 36(2), 1015-1052. https://doi.org/10.1002/int.22329
  118. Liu, Y., Zhang, B., Feng, Y., Lv, X., Ji, D., Niu, Z., Yang, Y., Zhao, X. and Fan, Y. (2020i), "Development of 340-GHz Transceiver Front End Based on GaAs Monolithic Integration Technology for THz Active Imaging Array", Appl. Sci., 10(21), 7924. https://doi.org/10.3390/app10217924
  119. Lv, Z. and Kumar, N. (2020), "Software defined solutions for sensors in 6G/IoE", Comput. Commun., 153, 42-47. https://doi.org/10.1016/j.comcom.2020.01.060
  120. Lv, Z. and Qiao, L. (2020), "Deep belief network and linear perceptron based cognitive computing for collaborative robots", Appl. Soft Comput., 92, 106300. https://doi.org/10.1016/j.asoc.2020.106300
  121. Lv, Z. and Song, H. (2019), "Mobile internet of things under data physical fusion technology", IEEE Internet of Things Journal, 7(5), 4616-4624. https://doi.org/10.1109/JIOT.2019.2954588
  122. Lv, Z. and Xiu, W. (2019), "Interaction of edge-cloud computing based on SDN and NFV for next generation IoT", IEEE Internet of Things Journal, 7(7), 5706-5712. https://doi.org/10.1109/JIOT.2019.2942719
  123. Mahboubi, A. and Ajorloo, A. (2005), "Experimental study of the mechanical behavior of plastic concrete in triaxial compression", Cement Concrete Res., 35(2), 412-419. https://doi.org/10.1016/j.cemconres.2004.09.011
  124. Marsal, R.J. and Resendiz, D. (1971), "Effectiveness of cutoffs in earth foundations and abutments of dams", Proceedings of the Fourth Pan-American Conference on Soil Mechanics and Foundation Engineering.
  125. Miloud, B. (2005), "Permeability and porosity characteristics of steel fiber reinforced concrete", Asian J. Civil Eng. (Build. Hous.), 6(4), 317-330. https://www.sid.ir/en/journal/ViewPaper.aspx?id=48863
  126. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014
  127. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014b), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833
  128. Mou, B. and Bai, Y. (2018), "Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone", Eng. Struct., 168, 487-504. https://doi.org/10.1016/j.engstruct.2018.04.029
  129. Mou, B., Li, X., Bai, Y. and Wang, L. (2019a), "Shear behavior of panel zones in steel beam-to-column connections with unequal depth of outer annular stiffener", J. Struct. Eng., 145(2), 04018247. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002256
  130. Mou, B., Zhao, F., Qiao, Q., Wang, L., Li, H., He, B. and Hao, Z. (2019b), "Flexural behavior of beam to column joints with or without an overlying concrete slab", Eng. Struct., 199, 109616. https://doi.org/10.1016/j.engstruct.2019.109616
  131. Mousavi, A.A., Zhang, C., Masri, S.F. and Gholipour, G. (2020), "Structural damage localization and quantification based on a ceemdan hilbert transform neural network approach: A model steel truss bridge case study", Sensors, 20(5), 1271. https://doi.org/10.3390/s20051271
  132. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., Int. J., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279
  133. Nguyen, T.B.T. (2017), "Adaptive MIMO Controller Design for Chaos Synchronization in Coupled Josephson Junctions via Fuzzy Neural Networks", J. Adv. Eng. Computat., 1(1), 80-86. http://dx.doi.org/10.25073/jaec.201711.52
  134. Ni, T., Chang, H., Song, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2019a), "Non-intrusive online distributed pulse shrinking-based interconnect testing in 2.5 D IC", IEEE Transact. Circuits Syst. II: Express Briefs, 67(11), 2657-2661. https://doi.org/10.1109/TCSII.2019.2962824
  135. Ni, T., Yao, Y., Chang, H., Lu, L., Liang, H., Yan, A., Huang, Z. and Wen, X. (2019b), "LCHR-TSV: Novel low cost and highly repairable honeycomb-based TSV redundancy architecture for clustered faults", IEEE Transact. Comput.-Aided Des. Integr. Circuits Syst., 39(10), 2938-2951. https://doi.org/10.1109/TCAD.2019.2946243
  136. Ni, T., Xu, Q., Huang, Z., Liang, H., Yan, A. and Wen, X. (2020), "A cost-effective TSV repair architecture for clustered faults in 3D IC", IEEE Transact. Comput.-Aided Des. Integr. Circuits Syst. https://doi.org/10.1109/TCAD.2020.3025169
  137. Pang, R., Xu, B., Zhou, Y., Zhang, X. and Wang, X. (2020), "Fragility analysis of high CFRDs subjected to mainshock-aftershock sequences based on plastic failure", Eng. Struct., 206, 110152. https://doi.org/10.1016/j.engstruct.2019.110152
  138. Pisheh, Y.P. and Hosseini, S.M.M. (2012), "Stress-strain behavior of plastic concrete using monotonic triaxial compression tests", J. Central South Univ., 19(4), 1125-1131. https://doi.org/10.1007/s11771-012-1118-y
  139. Qi, C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives", Minerals Eng., 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025
  140. Qi, C., Fourie, A., Chen, Q. and Liu, P. (2019), "Application of first-principles theory in ferrite phases of cemented paste backfill", Minerals Eng., 133, 47-51. https://doi.org/10.1016/j.mineng.2019.01.011
  141. Qian, J., Feng, S., Li, Y., Tao, T., Han, J., Chen, Q. and Zuo, C. (2020a), "Single-shot absolute 3D shape measurement with deep-learning-based color fringe projection profilometry", Optics Letters, 45(7), 1842-1845. https://doi.org/10.1364/OL.388994
  142. Qian, J., Feng, S., Tao, T., Hu, Y., Li, Y., Chen, Q. and Zuo, C. (2020b), "Deep-learning-enabled geometric constraints and phase unwrapping for single-shot absolute 3D shape measurement", APL Photonics, 5(4), 046105. https://doi.org/10.1063/5.0003217
  143. Qiu, T., Shi, X., Wang, J., Li, Y., Qu, S., Cheng, Q., Cui, T. and Sui, S. (2019), "Deep learning: A rapid and efficient route to automatic metasurface design", Adv. Sci., 6(12), 1900128. https://doi.org/10.1002/advs.201900128
  144. Qu, S., Han, Y., Wu, Z. and Raza, H. (2020), "Consensus modeling with asymmetric cost based on data-driven robust optimization", Group Decision Negotiat., 1-38. https://doi.org/10.1007/s10726-020-09707-w
  145. Rapoport, J., Aldea, C.-M., Shah, S.P., Ankenman, B. and Karr, A. (2002), "Permeability of cracked steel fiber-reinforced concrete", J. Mater. Civil Eng., 14(4), 355-358. https://doi.org/10.1061/(ASCE)0899-1561(2002)14:4(355)
  146. Ren, J., Zhang, C. and Hao, Q. (2020), "A theoretical method to evaluate honeynet potency", Future Generat. Comput. Syst., 116, 76-85. https://doi.org/10.1016/j.future.2020.08.021
  147. Rice, J.D. and Duncan, J.M. (2009), "Findings of case histories on the long-term performance of seepage barriers in dams", J. Geotech. Geoenviron. Eng., 136(1), 2-15. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000175
  148. Roy, S.K., Nayak, D., Dash, N., Dhawan, N. and Rath, S.S. (2020), "Microwave-assisted reduction roasting-magnetic separation studies of two mineralogically different low-grade iron ores", Int. J. Minerals Metall. Mater., 27(11), 1449-1461. https://doi.org/10.1007/s12613-020-1992-5
  149. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Statist. Mech. Applicat., 124046. https://doi.org/10.1016/j.physa.2019.124046
  150. Shahabi, S., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S. (2016), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., Int. J., 20(3), 651-669. https://10.12989/scs.2016.20.3.651
  151. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008
  152. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050
  153. Shariati, A., Shariati, M., Ramli Sulong, N.H., Suhatril, M., Arabnejad Khanouki, M.M. and Mahoutian, M. (2014a), "Experimental assessment of angle shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Constr. Build. Mater., 52, 276-283. http://dx.doi.org/10.1016/j.conbuildmat.2013.11.036
  154. Shariati, M., Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Arabnejad Khanouki, M.M. (2014b), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017
  155. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017.
  156. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019a), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534
  157. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and PoiNgian, S. (2019b), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319
  158. Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019c), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., Int. J., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225
  159. Shariati, M., Trung, N.-T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019d), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., Int. J., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427
  160. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020a), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., Int. J., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587
  161. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020b), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0
  162. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020c), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., Int. J., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155
  163. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020d), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., Int. J., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183
  164. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020e), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886
  165. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020f), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x
  166. Shi, K., Tang, Y., Liu, X. and Zhong, S. (2017), "Non-fragile sampled-data robust synchronization of uncertain delayed chaotic Lurie systems with randomly occurring controller gain fluctuation", ISA Transact., 66, 185-199. https://doi.org/10.1016/j.isatra.2016.11.002
  167. Shi, K., Tang, Y., Zhong, S., Yin, C., Huang, X. and Wang, W. (2018), "Nonfragile asynchronous control for uncertain chaotic Lurie network systems with Bernoulli stochastic process", Int. J. Robust Nonlinear Control, 28(5), 1693-1714. https://doi.org/10.1002/rnc.3980
  168. Shi, K., Wang, J., Tang, Y. and Zhong, S. (2020a), "Reliable asynchronous sampled-data filtering of T-S fuzzy uncertain delayed neural networks with stochastic switched topologies", Fuzzy Sets Syst., 381, 1-25. https://doi.org/10.1016/j.fss.2018.11.017
  169. Shi, K., Wang, J., Zhong, S., Tang, Y. and Cheng, J. (2020b), "Non-fragile memory filtering of TS fuzzy delayed neural networks based on switched fuzzy sampled-data control", Fuzzy Sets Syst., 394, 40-64. https://doi.org/10.1016/j.fss.2019.09.001
  170. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225
  171. Singh, A. and Singhal, D. (2011), "Permeability of steel fibre reinforced concrete influence of fibre parameters", Procedia Eng., 14, 2823-2829. https://doi.org/10.1016/j.proeng.2011.07.355
  172. Soroush, A. and Soroush, M. (2005), "Parameters affecting the thickness of bentonite cake in cutoff wall construction: case study and physical modeling", Can. Geotech. J., 42(2), 646-654 https://doi.org/10.1139/t04-090
  173. Sun, L., Li, C., Zhang, C., Su, Z. and Chen, C. (2018), "Early monitoring of rebar corrosion evolution based on FBG sensor", Int. J. Struct. Stabil. Dyn., 18(8), 1840001. https://doi.org/10.1142/S0219455418400011
  174. Sun, L., Li, C., Zhang, C., Liang, T. and Zhao, Z. (2019), "The strain transfer mechanism of fiber bragg grating sensor for extra large strain monitoring", Sensors, 19(8), 1851. https://doi.org/10.3390/s19081851
  175. Sun, L., Yang, Z., Jin, Q. and Yan, W. (2020), "Effect of Axial Compression Ratio on Seismic Behavior of GFRP Reinforced Concrete Columns", Int. J. Struct. Stabil. Dyn., 20(6), 2040004. https://doi.org/10.1142/S0219455420400040
  176. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the 5th International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland.
  177. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433
  178. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997
  179. Trung, N.-T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019a), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639
  180. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019b), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., Int. J., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415
  181. Tsai, Y.-H., Wang, J., Chien, W.-T., Wei, C.-Y., Wang, X. and Hsieh, S.-H. (2019), "A BIM-based approach for predicting corrosion under insulation", Automat. Constr., 107, 102923. https://doi.org/10.1016/j.autcon.2019.102923
  182. Wang, W., Guo, J., Long, C., Li, W. and Guan, J. (2015), "Flaky carbonyl iron particles with both small grain size and low internal strain for broadband microwave absorption", J. Alloys Compounds, 637, 106-111. https://doi.org/10.1016/j.jallcom.2015.02.220
  183. Wang, J., Huang, Y., Wang, T., Zhang, C. and hui Liu, Y. (2020a), "Fuzzy finite-time stable compensation control for a building structural vibration system with actuator failures", Appl. Soft Comput., 93, 106372. https://doi.org/10.1016/j.asoc.2020.106372
  184. Wang, J., Zhu, P., He, B., Deng, G., Zhang, C. and Huang, X. (2020b), "An adaptive neural sliding mode control with ESO for uncertain nonlinear systems", Int. J. Control Automat. Syst., 1-11. https://doi.org/10.1007/s12555-019-0972-x
  185. Wang, L., Huang, Y., Xie, Y. and Du, Y. (2020c), "A new regularization method for dynamic load identification", Science Progress, 103(3), 0036850420931283. https://doi.org/10.1177/0036850420931283
  186. Wang, X.-F., Gao, P., Liu, Y.-F., Li, H.-F. and Lu, F. (2020d), "Predicting Thermophilic Proteins by Machine Learning", Current Bioinform., 15(5), 493-502. https://doi.org/10.2174/1574893615666200207094357
  187. Wang, X.-p., Li, Z.-c., Sun, T.-c., Kou, J. and Li, X.-h. (2020e), "Factor analysis on the purity of magnesium titanate directly prepared from seashore titanomagnetite concentrate through direct reduction", Int. J. Minerals Metall. Mater., 27(11), 1462-1470. https://doi.org/10.1007/s12613-020-1990-7
  188. Wang, X., Liu, Y. and Choo, K. (2020f), "Fault tolerant, ulti-subset aggregation scheme for smart grid", IEEE Transact. Indust. Inform.
  189. Wu, C., Wang, X., Chen, M. and Kim, M.J. (2019a), "Differential received signal strength based RFID positioning for construction equipment tracking", Adv. Eng. Inform., 42, 100960. https://doi.org/10.1016/j.aei.2019.100960
  190. Wu, T., Cao, J., Xiong, L. and Zhang, H. (2019b), "New stabilization results for semi-Markov chaotic systems with fuzzy sampled-data control", Complexity, 2019. https://doi.org/10.1155/2019/7875305
  191. Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2020a), "Critical review of data-driven decision-making in bridge operation and maintenance", Struct. Infrastruct. Eng., 1-24. https://doi.org/10.1080/15732479.2020.1833946
  192. Wu, T., Xiong, L., Cheng, J. and Xie, X. (2020b), "New results on stabilization analysis for fuzzy semi-Markov jump chaotic systems with state quantized sampled-data controller", Inform. Sci., 521, 231-250. https://doi.org/10.1016/j.ins.2020.02.051
  193. Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2021), "Ontological knowledge base for concrete bridge rehabilitation project management", Automat. Constr., 121, 103428. https://doi.org/10.1016/j.autcon.2020.103428
  194. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel and Composite Structures, 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433
  195. Xu, M., Li, C., Chen, Z., Wang, Z. and Guan, Z. (2018a), "Assessing visual quality of omnidirectional videos", IEEE Transact. Circuits Syst. Video Technol., 29(12), 3516-3530. https://doi.org/10.1109/TCSVT.2018.2886277
  196. Xu, M., Li, T., Wang, Z., Deng, X., Yang, R. and Guan, Z. (2018b), "Reducing complexity of HEVC: A deep learning approach", IEEE Transact. Image Process., 27(10), 5044-5059. https://doi.org/10.1109/TIP.2018.2847035
  197. Xu, M., Li, C., Zhang, S. and Le Callet, P. (2020), "State-of-the-art in 360 video/image processing: Perception, assessment and compression", IEEE J. Select. Topics Signal Process., 14(1), 5-26. https://doi.org/10.1109/JSTSP.2020.2966864
  198. Xue, Q., Zhu, Y. and Wang, J. (2019), "Joint distribution estimation and Naive Bayes classification under local differential privacy", IEEE Transact. Emerg. Topics Comput. https://doi.org/10.1109/TETC.2019.2959581
  199. Yang, M. and Sowmya, A. (2015), "An underwater color image quality evaluation metric", IEEE Transact. Image Process., 24(12), 6062-6071. https://doi.org/10.1109/TIP.2015.2491020
  200. Yang, R., Xu, M., Liu, T., Wang, Z. and Guan, Z. (2018), "Enhancing quality for HEVC compressed videos", IEEE Transact. Circuits Syst. Video Technol., 29(7), 2039-2054. https://doi.org/10.1109/TCSVT.2018.2867568
  201. Yang, S., Deng, B., Wang, J., Li, H., Lu, M., Che, Y., Wei, X. and Loparo, K.A. (2019), "Scalable digital neuromorphic architecture for large-scale biophysically meaningful neural network with multi-compartment neurons", IEEE Transact. Neural Networks Learn. Syst., 31(1), 148-162. https://doi.org/10.1109/TNNLS.2019.2899936
  202. Yang, J., Li, S., Wang, Z., Dong, H., Wang, J. and Tang, S. (2020), "Using Deep Learning to Detect Defects in Manufacturing: A Comprehensive Survey and Current Challenges", Materials, 13(24), 5755. https://doi.org/10.3390/ma13245755
  203. Yu, H., Dai, W., Qian, G., Gong, X., Zhou, D., Li, X. and Zhou, X. (2020a), "The NOx Degradation Performance of Nano-TiO2 Coating for Asphalt Pavement", Nanomaterials, 10(5), 897. https://doi.org/10.3390/nano10050897
  204. Yu, H., Zhu, X., Qian, G., Gong, X. and Nie, X. (2020b), "Evaluation of phosphorus slag (PS) content and particle size on the performance modification effect of asphalt", Constr. Build. Mater., 256, 119334. https://doi.org/10.1016/j.conbuildmat.2020.119334
  205. Yue, H., Wang, H., Chen, H., Cai, K. and Jin, Y. (2020), "Automatic detection of feather defects using Lie group and fuzzy Fisher criterion for shuttlecock production", Mech. Syst. Signal Process., 141, 106690. https://doi.org/10.1016/j.ymssp.2020.106690
  206. Zhang, C. (2014), "Control force characteristics of different control strategies for the wind-excited 76-story benchmark building structure", Adv. Struct. Eng., 17(4), 543-559. https://doi.org/10.1260/1369-4332.17.4.543
  207. Zhang, W. (2020), "Parameter adjustment strategy and experimental development of hydraulic system for wave energy power generation", Symmetry, 12(5), 711. https://doi.org/10.3390/sym12050711
  208. Zhang, J. and Liu, B. (2019), "A review on the recent developments of sequence-based protein feature extraction methods", Current Bioinform., 14(3), 190-199. https://doi.org/10.2174/1574893614666181212102749
  209. Zhang, C. and Mousavi, A.A. (2020), "Blast loads induced responses of RC structural members: State-of-the-art review", Compos. Part B: Eng., 195, 108066. https://doi.org/10.1016/j.compositesb.2020.108066
  210. Zhang, C. and Wang, H. (2019a), "Robustness of the active rotary inertia driver system for structural swing vibration control subjected to multi-type hazard excitations", Appl. Sci., 9(20), 4391. https://doi.org/10.3390/app9204391
  211. Zhang, C. and Wang, H. (2019b), "Swing vibration control of suspended structure using active rotary inertia driver system: Parametric analysis and experimental verification", Appl. Sci., 9(15), 3144. https://doi.org/10.3390/app9153144
  212. Zhang, C. and Wang, H. (2020c), "Swing vibration control of suspended structures using the Active Rotary Inertia Driver system: Theoretical modeling and experimental verification", Struct. Control Health Monitor., 27(6), e2543. https://doi.org/10.1002/stc.2543
  213. Zhang, X., Wang, Y., Chen, X., Su, C.-Y., Li, Z., Wang, C. and Peng, Y. (2018), "Decentralized adaptive neural approximated inverse control for a class of large-scale nonlinear hysteretic systems with time delays", IEEE Transact. Syst. Man Cybernet.: Syst., 49(12), 2424-2437. https://doi.org/10.1109/TSMC.2018.2827101
  214. Zhang, C., Alam, Z., Sun, L., Su, Z. and Samali, B. (2019a), "Fibre Bragg grating sensor-based damage response monitoring of an asymmetric reinforced concrete shear wall structure subjected to progressive seismic loads", Struct. Control Health Monitor., 26(3), e2307. https://doi.org/10.1002/stc.2307
  215. Zhang, C., Gholipour, G. and Mousavi, A.A. (2019b), "Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading", Eng. Struct., 181, 124-142. https://doi.org/10.1016/j.engstruct.2018.12.014
  216. Zhang, H., Qiu, Z., Cao, J., Abdel-Aty, M. and Xiong, L. (2019c), "Event-triggered synchronization for neutral-type semi-Markovian neural networks with partial mode-dependent time-varying delays", IEEE Transact. Neural Networks Learn. Syst., 31(11), 4437-4450. https://doi.org/10.1109/TNNLS.2019.2955287
  217. Zhang, B., Niu, Z., Wang, J., Ji, D., Zhou, T., Liu, Y., Feng, Y., Hu, Y., Zhang, J. and Fan, Y. (2020a), "Four-hundred gigahertz broadband multi-branch waveguide coupler", IET Microwaves, Antennas & Propagation, 14(11), 1175-1179. https://doi.org/10.1049/iet-map.2020.0090
  218. Zhang, C., Abedini, M. and Mehrmashhadi, J. (2020b), "Development of pressure-impulse models and residual capacity assessment of RC columns using high fidelity Arbitrary Lagrangian-Eulerian simulation", Eng. Struct., 224, 111219. https://doi.org/10.1016/j.engstruct.2020.111219
  219. Zhang, C., Chen, Z., Wang, J., Liu, Z. and Chen, C.P. (2020c), "Fuzzy adaptive two-bit-triggered control for a class of uncertain nonlinear systems with actuator failures and dead-zone constraint", IEEE Transac. Cybernetics, 51(1), 210-221. https://doi.org/10.1109/TCYB.2020.2970736
  220. Zhang, C., Gholipour, G. and Mousavi, A.A. (2020d), "State-of-the-Art Review on Responses of RC Structures Subjected to Lateral Impact Loads", Arch. Computat. Methods Eng., 1-31. https://doi.org/10.1007/s11831-020-09467-5
  221. Zhang, J., Chen, Q., Sun, J., Tian, L. and Zuo, C. (2020e), "On a universal solution to the transport-of-intensity equation", Optics Letters, 45(13), 3649-3652. https://doi.org/10.1364/OL.391823
  222. Zhang, J., Sun, J., Chen, Q. and Zuo, C. (2020f), "Resolution analysis in a lens-free on-chip digital holographic microscope", IEEE Transact. Computat. Imag., 6, 697-710. https://doi.org/10.1109/TCI.2020.2964247
  223. Zhang, R., Jiang, T., Li, F., Li, G., Chen, H. and Li, X. (2020g), "Coordinated bidding strategy of wind farms and power-to-gas facilities using a cooperative game approach", IEEE Transact. Sustain. Energy, 11(4), 2545-2555. https://doi.org/10.1109/TSTE.2020.2965521
  224. Zhang, S., Pak, R.Y. and Zhang, J. (2020h), "Vertical time-harmonic coupling vibration of an impermeable, rigid, circular plate resting on a finite, poroelastic soil layer", Acta Geotech., 16, 911-935. https://doi.org/10.1007/s11440-020-01067-8
  225. Zhang, T., He, X., Deng, Y., Tsang, D.C., Yuan, H., Shen, J. and Zhang, S. (2020i), "Swine manure valorization for phosphorus and nitrogen recovery by catalytic-thermal hydrolysis and struvite crystallization", Sci. Total Environ., 729, 138999. https://doi.org/10.1016/j.scitotenv.2020.138999
  226. Zhang, W., Tang, Z., Yang, Y. and Wei, J. (2021), "Assessment of FRP-Concrete Interfacial Debonding with Coupled Mixed-Mode Cohesive Zone Model", J. Compos. Constr., 25(2), 04021002. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001114
  227. Zhao, H., Li, Y., Song, Q., Liu, S., Ma, Q., Ma, L. and Shu, X. (2019), "Catalytic reforming of volatiles from co-pyrolysis of lignite blended with corn straw over three different structures of iron ores", J. Anal. Appl. Pyrol., 144, 104714. https://doi.org/10.1016/j.jaap.2019.104714
  228. Zhao, J., Liu, J., Jiang, J. and Gao, F. (2020), "Efficient Deployment with Geometric Analysis for mmWave UAV Communications", IEEE Wireless Commun. Lett., 9(7), 1115-1119. https://doi.org/10.1109/LWC.2020.2982637
  229. Zhu, L., Zhang, C., Guan, X., Uy, B., Sun, L. and Wang, B. (2018), "The multi-axial strength performance of composited structural B-C-W members subjected to shear forces", Steel Compos. Struct., Int. J., 27(1), 75-87. https://doi.org/10.12989/scs.2018.27.1.075
  230. Zhu, J., Wang, X., Chen, M., Wu, P. and Kim, M.J. (2019a), "Integration of BIM and GIS: IFC geometry transformation to shapefile using enhanced open-source approach", Automat. Constr., 106, 102859. https://doi.org/10.1016/j.autcon.2019.102859
  231. Zhu, J., Wang, X., Wang, P., Wu, Z. and Kim, M.J. (2019b), "Integration of BIM and GIS: Geometry from IFC to shapefile using open-source technology", Automat. Constr., 102, 105-119. https://doi.org/10.1016/j.autcon.2019.02.014
  232. Zhu, L., Kong, L. and Zhang, C. (2020), "Numerical study on hysteretic behaviour of horizontal-connection and energy-dissipation structures developed for prefabricated shear walls", Appl. Sci., 10(4), 1240. https://doi.org/10.3390/app10041240
  233. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., Int. J., 29(1), 67-75. https://doi.org/10.12989/scs.2018.29.1.067
  234. Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Optics Lasers Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006
  235. Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Scientif. Reports, 7(1), 7654. https://doi.org/10.1038/s41598-017-06837-1
  236. Zuo, C., Li, J., Sun, J., Fan, Y., Zhang, J., Lu, L., Zhang, R., Wang, B., Huang, L. and Chen, Q. (2020a), "Transport of intensity equation: a tutorial", Optics Lasers Eng., 106187. https://doi.org/10.1016/j.optlaseng.2020.106187
  237. Zuo, C., Sun, J., Li, J., Asundi, A. and Chen, Q. (2020b), "Wide-field high-resolution 3d microscopy with fourier ptychographic diffraction tomography", Optics Lasers Eng., 128, 106003. https://doi.org/10.1016/j.optlaseng.2020.106003