Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

Performance Measurement of The Hybrid Sheet with Dual Function of Electromagnetic-Shielding and Heat-Dissipating

전자파차폐 및 방열 기능을 가지는 하이브리드시트 성능측정

  • Ahn, Sung-Su (Department of Robot Automation, Robot Campus of Korea Polytechnics)
  • 안성수 (한국폴리텍대학 로봇캠퍼스 로봇자동화과)
  • Received : 2021.01.28
  • Accepted : 2021.05.07
  • Published : 2021.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper presents the performance measurement results of a hybrid sheet with both shielding and heat dissipation functions developed by laminating copper mesh sheets and natural graphite sheets, which are used widely as electromagnetic shielding and heat-dissipating materials in electronic devices, without a pressure-sensitive adhesive (PSA). The results were compared by measuring the vertical and horizontal thermal conductivity with two other products to confirm the heat dissipation performance. A radiation emission test confirmed the electromagnetic shielding performance using a 3m electromagnetic anechoic chamber according to the CISPR 11 standard. In the case of vertical thermal conductivity, the proposed hybrid sheet was approximately 8.63 times higher than that of an aluminum sheet with heat dissipation coating and 18.7 times higher than that of a copper sheet laminated with artificial graphite with PSA. The proposed hybrid sheet was approximately 0.64 times that of the sheet, and approximately 1.76 times that of the heat-dissipated aluminum sheet in case of horizontal thermal conductivity. Measurements after applying each sheet in the same heat source revealed the proposed hybrid sheet to have the best heat dissipation performance. The radiation emission test showed that significantly radiation noise had been removed.

본 논문에서는 전자기기 등에서 전자파 차폐 및 방열소재로 많이 채택되는 동 메쉬 시트와 천연그라파이트 시트를 감압 접착제없이 합지시켜 개발된 차폐 및 방열의 기능을 동시에 가지는 하이브리드시트의 성능 측정결과를 제시하였다. 객관적인 방열 성능을 확인하기 위해 2개의 다른 제품들과 수직 및 수평 열전도도를 각각 측정하여 결과를 비교하였으며, 전자파 차폐 성능은 CISPR 11규격에 따른 복사방출시험을 3m 전자파 무향실에서 진행하여 확인하였다. 수직 열전도도의 경우 제안된 하이브리드 시트가 방열코팅이 된 알루미늄 시트 대비 약 8.63배, 감압 접착제로 인조 그라파이트를 합지시킨 구리 시트에 비해 18.7배 높은 수준이였으며, 수평 열전도도는 인조 그라파이트를 합지시킨 구리 시트에 비해 약 0.64배, 방열 코팅된 알루미늄 시트에 대해서는 약 1.76배로 나타났다. 동일한 열원에서 각 시트들을 적용 후 측정한 결과에서는 제안된 하이브리드 시트가 열방출 기능이 가장 우수하였고 복사방출시험에서는 방사노이즈들이 상당 부분 제거되는 결과를 얻었다.

Keywords

References

  1. D. I. Kim, S. H. Park, Y. I. Joo, "Development and prospect of Smart EMW Absorber for Protection of Electronic Circuits and Devices with Heat Radiating Function", Journal of the Korea Institute of Information and Communication Engineering, vol. 19, no. 5, pp. 1040-1046, May 2015. DOI: https://doi.org/10.6109/jkiice.2015.19.5.1040
  2. B. S. Kim, "Development on Manufacturing the Equipment and Shielding Sheet of the EMI Shielding Sheet of Grid Pattern for the Wireless Charger", Journal of the Korean Society of Mechanical Technology, vol. 18, no. 1, pp. 109-114, Feb. 2016. DOI: https://doi.org/10.17958/ksmt.18.1.201602.109
  3. S. J. Chae, B. R. Cho, B. P. Hong, B. S. Lee, H. S. Byun, "Preparation of Sheet with CNT for EMI Shielding and Its EMI Shielding Property", Applied Chemistry for Engineering, vol. 21, no. 4, pp. 430-434, Aug. 2010.
  4. J. Y. Han, C. H. Lee, M. G. Choi, S. J. Hong, J. H. Park, D. J. Lee, "Electromagnetic Wave Shielding Effect of Nano-powder Dispersed Epoxy Resin Composite", Journal of Korean Powder Metallurgy Institute, vol. 22, no. 4, pp. 234-239, Aug. 2015. DOI: https://doi.org/10.4150/kpmi.2015.22.4.234
  5. J. H. Cho, K. G. Jeon, "Measurement Algorithms of Sizing removed state using Image Process And Development of Carbon fibers with Electromagnetic shielding Performance", Journal of the Korea Academia-Industrial cooperation Society, vol. 18, no. 2, pp. 95-101, Feb. 2017. DOI: https://doi.org/10.5762/KAIS.2017.18.2.95
  6. W. L. Song, M. S. Cao, M. M. Lu, S. Bi, C. Y. Wang, J. Liu, J. Yuan, L. Z. Fan, "Flexible graphene/polymer composite films in sandwich structures for effective electromagnetic interference shielding", Carbon, vol. 66, pp. 67-76, Aug. 2014. DOI: https://doi.org/10.1016/j.carbon.2013.08.043
  7. J. H. Hong, S. E. Shim, "Invited Review Article: Trends in Development of Thermally Conductive Polymer Composites", Applied Chemistry for Engineering, vol. 21, no. 2, pp. 115-128, Apr. 2010.
  8. S. M. Kim, S. M. Lee, "Preparation and Characteristics of the Excellent Heat-releasing Composite Sheet Containing AlN and Graphite Powder", Journal of Korean Institute of Electronic Material Engineers, vol. 25, no. 6, pp. 462-466, Jun. 2012. DOI: https://doi.org/10.4313/JKEM.2012.25.6.462
  9. M. H. Yoo, J. H. Song, W. S. Jeong, Y. S. Jang, S. H. Choi, S. M. Yang, S. J. Kang, "A Study on improving the vertical thermal conductivity of graphite-polymer sheet", Proceedings of KSAE 2016 Annual Spring Conference, pp. 888-890, Jeju, Korea, May 2016.
  10. D. I. Kim, Y. B. Jeon, "A Study on Manufacturing Method of High Performance Smart EMW Absorber with Heat Radiating Function and Its Prospects", Journal of Korean Institute of Electromagnetic Engineering and Science, vol. 26, no. 10, pp. 841-850, Oct. 2015. DOI: https://doi.org/10.5515/KJKIEES.2015.26.10.841
  11. Y. S. Kim, S. H. Park, J. W. Choi, L. S. Kong, G. H. Yun, B. G. Min, S. H. Lee, "Comparative Analysis of Heat Sink and Adhesion Properties of Thermal Conductive Particles for Sheet Adhesive", Textile Coloration and Finishing, vol. 28, no. 1, pp. 48-56, Mar. 2016. DOI: https://doi.org/10.5764/TCF.2016.28.1.48
  12. S. S. Ahn, K. J. Kwon, "Development of the multi-function sheet for electromagnetic shielding and heat-dissipating using PSA free heterogeneous material laminating method", Journal of the Institute of Electronics Engineers of Korea, vol. 56, no. 10, pp. 93-101, Oct. 2019. DOI: https://doi.org/10.5573/ieie.2019.56.10.93
  13. Y. S. Jang, Thermal Properties of Porous Copper/Carbon Materials Heterostructures, Master's thesis, Chonnam National University, Kwangju, Korea, pp.8, 2017.