초록
본 연구에서는 본 연구진에서 설계한 덕티드 팬의 제자리 비행 성능을 확인하기 위해 40% 축소모델을 이용하여 지상 회전 시험 및 전산 유체 해석을 수행하였다. 본 축소 시험 모델의 블레이드 개수는 6개이며, 팬의 회전속도는 4,000RPM이다. 팬 블레이드의 콜렉티브 피치 각도는 20도에서 36도까지에서 시험을 진행하였다. 지상 시험은 정지 상태에서 1,000RPM씩 증가시키며 4,000RPM까지 성능 데이터를 계측하였다. 전산 유체 해석은 지상 시험과 동일한 조건에서 4,000RPM 시험 조건에 대해 수행하였다. 제자리 비행 성능은 추력, 파워, 덕트 추력 비, FM(Figure of Merit)으로 확인하였다. 시험과 해석 결과 간 비교를 통해 성능 결과의 신뢰성을 확보하였으며, 목표 성능은 콜렉티브 피치각 31도 이상의 조건에서 달성됨을 확인하였다.
In the present study, ground tests and CFD simulations for a ducted fan system were performed to verify the hovering performance of the ducted fan system designed by KARI rotorcraft team. Six blades were composed for the ducted fan, and target rotating speed of the fan was decided to 4,000 RPM. Collective pitch angles were considered from 20 degrees to 36 degrees. The test data were obtained by increasing the rotating speed up to 4,000 RPM in 1,000 RPM increments. The CFD simulations were considered only 4,000 RPM of rotating speed. The hovering performance was represented by thrust, power, duct thrust ratio, and FM(Figure of Merit). Reliability of the performance results was ensured through the test and simulation results, and it was found that the target performance was achieved under conditions above 31 degrees of the pitch angle.