참고문헌
- W. E. Ranz, "Some experiments on the dynamics of liquid films", J. of Applied Physics, Vol. 30, 1959, pp. 1950-1955. https://doi.org/10.1063/1.1735095
- K. D. Miller, "Distribution of spray from impinging liquid jets", J. of Applied Physics, Vol. 31, 1960, pp. 1132-1133. https://doi.org/10.1063/1.1735772
- D. Hasson and R. E. Peck, "Thickness distribution in a sheet formed by impinging jets", A. I. Ch. E. J., Vol. 10, 1964, pp. 752-754. https://doi.org/10.1002/aic.690100533
- E. A. Ibrahim and A. J. Przekwas, "Impinging jets atomization", Phys. Fluids, Vol. 3, 1991, pp. 2981-987. https://doi.org/10.1063/1.857840
- R. Li and N. Ashgriz, "Characteristics of liquid sheets formed by two impinging jets", Phys. Fluids, Vol. 18, 2006, 087104. https://doi.org/10.1063/1.2338064
- T. Inamura and M. Shirota, "Effect of velocity profile of impinging jets on sheet characteristics formed by impingement of two round liquid jets", Int. J. of Multiphase Flow, Vol. 60, 2014, pp. 149-160. https://doi.org/10.1016/j.ijmultiphaseflow.2013.12.006
- F. R. S. Taylor, "Formation of thin flat sheets of water", Proc. Roy. Soc. of London, Vol. 259, 1960, pp. 1-17.
- Y. B. Shen and D. Poulikakos, "Thickness variation of liquid sheet formed by two impinging jets using holographic interferometry", J. Fluids Eng., Vol. 120, 1998, pp. 482-487. https://doi.org/10.1115/1.2820688
- Y. J. Choo and B. S. Kang, "Parametric study on impinging-jet liquid sheet thickness distribution using an interferometric method", Exp. in Fluids, Vol. 31, 2001, pp. 56-62. https://doi.org/10.1007/s003480000258
- N. Dombrowski, D. Hasson, and D. E. Ward, "Some aspects of liquid flow through fan spray nozzles", Chemical Engineering Science, Vol. 12, 1960, pp. 35-50. https://doi.org/10.1016/0009-2509(60)90004-X
- J. D. Naber and R. D. Reitz, "Modeling Engine Spray/Wall Impingement", 1988, SAE 880107.