References
- S.H. Kim, "Defects and countermeasures of press mold", Daekwang Books. pp. 467-499, 2003.
- X.C. Zhuang, W. Zhang, Y.L. Wu, Z. Zhao "Comprehensive prediction method for die-roll height of fine-blanking components", Int. J. Adv. Manuf. Technol., Vol.98, pp. 2819-2829 2018. https://doi.org/10.1007/s00170-018-2430-y
- Lange K, Birzer F, Hofel P, Mukhoty A, Singer H. "Cold forming and fineblanking", Edelstahlwerke Buderus AG. Feintool AG Lyss, pp. 141-51, 1997.
- T. Nakagawa "Fine blanking", The Nikkan Kogyo Shinbun, Ltd., Tokyo 1998.
- Jong-Deok Kim, "An experimental study on the effect of V-ring position and die chamfer shape on the die roll height in fine blanking tool", Journal of the Korea Academia-Industrial, cooperation Society, Vol. 13, No. 5, pp. 2009-2014, 2012. https://doi.org/10.5762/KAIS.2012.13.5.2009
- Q.D. Zheng, X.C. Zhuang, Z. Zhao "State-of-the-art and future challenge in fine-blanking technology", Prod. Eng., Vol.13, pp. 61-70, 2019 https://doi.org/10.1007/s11740-018-0839-7
- Jong-Deok Kim, "An experimental study on the effect of V-ring position and die chamfer shape on the die roll height in fine blanking tool", Journal of the Korea Academia-Industrial, cooperation Society, Vol. 13, No. 5, pp. 2009-2014, 2012 https://doi.org/10.5762/KAIS.2012.13.5.2009
- J.D. Kim, H.K. Kim "A study on the effect of V-ring position on the die roll height in fine blanking for special automobile seat recliner gear, Trans Tech Publications", Appl. Mech. Mater., Vol.383-390, pp. 7122-7127, 2012.
- XC Zhuang , W. Zhang , YL Wu , Z. Zhao "Comprehensive prediction method for die-roll height of fine-blanking components", The International Journal of Advanced Manufacturing Technology Vol.98, pp. 2819-2829, 2018. https://doi.org/10.1007/s00170-018-2430-y
- YC Leung , LC Chan , CH Cheng , TC Lee "The effects of tool geometry change on shearing edge finish in fine-blanking of different materials", Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol.217 pp. 1057-1062, 2003. https://doi.org/10.1177/095440540321700803
- T.S. Kwak, Y.J. Kim "Finite element analysis on the effect of die clearance on shear planes in fine blanking", J. Mater. Process. Technol., 130, pp. 462-468, 2002,
- N. Hatanaka, K. Yamaguchi "Finite element simulation of the shearing mechanism in the blanking of sheet metal", J. Mater. Process. Technol., 139, pp. 64-70, 2003. https://doi.org/10.1016/S0924-0136(03)00183-3
- W.F. Fan, J.H. Li "An investigation on the damage of AISI-1045 and AISI-1025 steels in fine-blanking with negative clearance", Mater. Sci. Eng. A, Vol.499, pp. 248-251, 2009. https://doi.org/10.1016/j.msea.2007.11.108
- S Kurra, S Bade, P Kumar G "Analysis of fine blanking process through finite element simulations", Advances in Materials and Processing Technologies, Vol.6, 2020.
- J.H Kim, J.G Ryu, C.S Choi, W.J Chung "Development of fine blanking die with fluid chamber and its application to production of circular blanks in a hydraulic press", Korean Soc. Precis. Eng., Vol 13(5), pp. 157-163, 1996.