참고문헌
- S. K. Heo. (2019). How to activate the hydrogen energy industry. Sejong : KIET
- H. Chang & P. Thapa. (2016). A Study of Monitoring and Operation for PEM Water Electrolysis and PEM Fuel Cell Through the Convergence of IoT in Smart Energy Campus Microgrid. Journal of the Korea Convergence Society, 7(6), 13-21. DOI : 10.15207/JKCS.2016.7.6..013
- K. Y. Chung & S. Kim. (2012). Optimization of Fuel Processing Unit of Fuel Cell System using Six-sigma Technique. Journal of Digital Convergence, 10(2), 225-229. DOI : 10.14400/JDPM.2012.10.2..225
- J. Bayer, & S. Ergun. (1967). An X-ray Study of carbon blacks produced from coals. Carbon, 5(2), 107-111. DOI : 10.1016/0008-6223(67)90064-4
- A. L. Dicks. (2006). The role of carbon in fuel cells. Journal of Power Sources, 156(2), 128-141. DOI : 10.1016/j.jpowsour.2006.02.054
- I. Mochida, I. Ito, Y. Korai, H. Fujitsu & K. Takeshita. (1981). Catalytic graphitization of fibrous and particulate carbons. Carbon, 19(6), 457-465. DOI : 10.1016/0008-6223(81)90029-4
- Carbot corporation. https://www.cabotcorp.com/solutions/products-plus/specialty-carbon-blacks.
- Lion Specialty Chemicals. Co., LTD. https://www.lion-specialty-chem.co.jp/en/product/carbon/carbon01.htm
- Denka Korea Co., Ltd. http://www.denka.co.kr/?page_id=725
- Tokai Carbon Co., LTD. https://www.tokaicarbon.co.jp/en/products/carbon_b/
- ASAHI CARBON Co., LTD. https://www.asahicarbon.co.jp/global_site/product/technology/index.html
- Orion ENGINEERED CARBONS. https://www.orioncarbons.com/specialty_carbon_blacks
- Phillips Carbon Black Limited. https://www.pcblltd.com/specialty-black/
- Himadri. https://www.himadri.com/products
- C. S. Oh. [2004]. Carbon material for electrode catalyst of polymer electrolyte fuel cell. Seoul : RESEAT
- H. J. kim, H. N. Lim, H. M. Oh, J. E. Ahn, H. S. Chei & H. N. Lee. (2011). Application of Fuel cell Catalysts and Low Pollution of Surface Treatment by Conductive Carbon Powder. Applied Chemistry, 15(2), 141-144.
- J. I. Lee. (2007). Review of Activated Carbon. Junrado : Jeollanam-do Institute of Health and Enviroment
- M. Kwiatkowski & E. Broniek. (2017). An analysis of the porous structure of activated carbons obtained from hazelnut shells by various physical and chemical methods of activation. Clloids and Surfaces A: Physicochemical and Engineering Aspects, 529, 443-453. DOI : 10.1016/j.colsurfa.2017.06.028
- S. Ijima. (1991). Helical microtubules of graphitic carbon. Nature, 354, 56-58. DOI : 10.1038/354056a0
- CNT Materials & Properties. (2019). Seoul : Korea University Nanoelectronics Laboratory.
- K. B. Kim, J P. Lee, M. J. Kim & Y. S. Min. (2019). Characteristics of Excimer Laser-Annealed Polycrystalline Silicon on Polymer layers. Journal of Convergence for Information Technology, 9(3), 75-81. DOI : 10.22156.CS4SMB.2019.9.3.075 https://doi.org/10.22156.CS4SMB.2019.9.3.075
- M. K. Seo & S. J. Park. (2010). Manufactruing Method of Carbon Fibers and Their Application Fields. Polymer Science and Technology, 21(2), 130-140.
- J. WANG, J. SUN, R. TIAN & J. XU. (2006). Plain carbon steel bipolar plates for PEMFC. Rare Metals, 25(6), 235-239. DOI : 10.1016/S1001-0521(07)60080-1
- R. Dweiri & J. Sahari. (2007) Electrical properties of carbon-based polypropylene composites for bipolar plates in polymer electrolyte membrane fuel cell (PEMFC). Journal of Power Sources, 171(2), 424-432. DOI :10.1016/j.jpowsour.2007.05.106
- I. U. Hwang et al. (2008). Bipolar plate made of carbon fiber epoxy composite for polymer electrolyte membrane fuel cells. Journal of Power Sources, 184(1), 90-94. DOI : 10.1016/j.jpowsour.2008.05.088
- Y. Show & K. Takahashi. (2009). Stainless steel bipolar plate coated with carbon nanotube (CNT)/polytetrafluoroethylene(PTFE) composite film for proton exchange membrane fuel cell (PEMFC). Journal of Power Sources, 190(2), 322-325. DOI : 10.1016/j.jpowsour.2009.01.027
- M. M. Larijani, M. Yari, A. Afshar, M. Jafarian & M. Eshghabadi. (2011). A comparison of carbon coated and uncoated 316L stainless steel for using as bipolar plates in PEMFCs. Journal of Alloys and Compounds, 509(27), 7400-7404. DOI : 10.1016/j.jallcom.2011.04.044
- K. H. Kim, J. W. Lim, M. K. Kim & D. G. Lee. (2013). Development of carbon fabric/graphite hybrid bipolar plate for PEMFC. Composite Structures, 98, 103-110. DOI : 10.1016/j.compstruct.2012.10.043
- M. K. Kim, J. W. Lim, K. H. Kim & D. G. Lee. (2013). Bipolar plates made of carbon fabric/phenolic composite reinforced with carbon black for PEMFC. Composite Structures, 96, 569-575. DOI : 10.1016/j.compstruct.2012.09.017
- M. K. Kim, J. W. Lim & D. G. Lee. (2015). Surface modification of carbon fiber phenolic bipolar plate for the HT-PEMFC with nano-carbon black and carbon felts. Composite Structures, 119, 630-637. DOI : 10.1016/j.compstruct.2014.09.010
- J. W. Lim, M. K. Kim, Y. H. Yu & D. G. Lee. (2014). Development of carbon/PEEK composite bipolar plates with nano-conductive particles for High-Temperature PEM fuel cells (HT-PEMFCs). Composite Structures, 118, 519-527. DOI : 10.1016/j.compstruct.2014.08.011
- H. E. Lee, S. H. Han, S. A. Song & S. S. Kim. (2015) Novel fabrication process for carbon fiber composite bipolar plates using sol gel and the double percolation effect for PEMFC. Composite Structures, 134, 44-51. DOI : 10.1016/j.compstruct.2015.08.037
- H. E. Lee, Y. S. Chung & S. S. Kim. (2017). Feasibility study on carbon - felt - reinforced thermoplastic composite materials for PEMFC bipolar plates. Composite Structures, 180, 378-385. DOI : 10.1016/j.compstruct.2017.08.037
- U. K. Chanda, A. Behera, S. Roy & S. Pati. (2018). Evaluation of Ni-Cr-P coatings electrodeposited on low carbon steel bipolar plates for polymer electrolyte membrane fuel cell. International Journal of Hydrogen Energy, 43(52), 23430-23440. DOI : 10.1016/j.ijhydene.2018.10.218
- O. A. Alo, I. O. Otunniyi, H. Pienaar & E. R. Sadiku. (2020). Electrical and mechanical properties of polypropylene/epoxy blend-graphite/carbon black composite for proton exchange membrane fuel cell bipolar plate. materialstoday : PROCEEDINGS. DOI : 10.1016/j.matpr.2020.03.642
- S. Witpathomwong, M. Okhawilai, C. Jubsilp, P. Karagiannidis & S. Rimdusit. (2020). Highly filled graphite/graphene/carbon nanotube in polybenzoxazine composites for bipolar plate in PEMFC. International Journal of Hydrogen Energy, 45(55), 30898-30910. DOI : 10.1016/j.ijhydene.2020.08.006
- D. Y. Lee, J. W. Lim, S. H. Nam, I. B. Choi & D. G. Lee. (2015). Gasket - integrated carbon/ silicone elastomer composite bipolar plate for high-temperature PEMFC. Composite Structures, 128, 284-290. DOI : 10.1016/j.compstruct.2015.03.063
- D. Y. Lee & D. G. Lee. (2016). Carbon composite bipolar plate for high-temperature proton exchange membrane fuel cells (HT-PEMFCs). Journal of Power Sources, 327, 119-126. DOI : 10.1016/j.jpowsour.2016.07.045
- J. Chen, T. Matsuura & M. Hori. (2004). Novel gas diffusion layer with water management function for PEMFC. Journal of Power Sources, 131(1-2), 155-161. DOI : 10.1016/j.jpowsour.2004.01.007
- C. J. Tseng & S. K. Lo. (2010). Effects of microstructure characteristics of gas diffusion layer and microporous layer on the performance of PEMFC. Energy Conversion and Management, 51(4), 677-684. DOI : 10.1016/j.enconman.2009.11.011
- C. H. Hung, C. H. Chiu, S. P. Wang, I. L. Chiang & H. Yang. (2012) Ultra thin gas diffusion layer development for PEMFC. International Journal of Hydrogen Energy, 37(17), 12805-12812. DOI : doi.org/10.1016/j.ijhydene.2012.05.110
- J. Lee, J. Hinebaugh & A. Bazylak. (2013). Synchrotron X-ray radiographic investigations of liquid water transport behavior in a PEMFC with MPL-coated GDLs. Journal of Power Sources, 227, 123-130. DOI : 10.1016/j.jpowsour.2012.11.006
- T. Chen, S. Liu, J. Zhang & M. Tang. (2019). Study on the characteristics of GDL with different PTFE content and its effect on the performance of PEMFC. International Journal of Heat and Mass Transfer, 128, 1168-1174. DOI : 10.1016/j.ijheatmasstransfer.2018.09.0 97
- O. Delikaya, N. Bevilacqua, L. Eifert, U.Kunz, R. Zeis & C. Roth. (2020). Porous electrospun carbon nanofibers network as an integrated electrode@gas diffusion layer for high temperature polymer electrolyte membrane fuel cells. Electrochimica Acta, 345, 136192. DOI : 10.1016/j.electacta.2020.136192
- Z. Zhang, P. He, Y. J. Dai, P. H. Jin & W. Q. Tao. (2020). Study of the mechanical behavior of paper-type GDL in PEMFC based on microstructure morphology. International Journal of Hydrogen Energy, 45(53), 29379-29394. DOI : 10.1016/j.ijhydene.2020.07.240
- P. A. Chuang, M. A. Rahman, F. Mojica, D. S. Hussey, D. L. Jacobson & J. M. LaManna. (2020). The interactive effect of heat and mass transport on water condensation in the gas diffusion layer of a proton exchange membrane fuel cell. Journal of Power Sources, 480, 229121. DOI : 10.1016/j.jpowsour.2020.229121
- G. G. Park et al. (2006). Adoption of nano-materials for the micro-layer in gas diffusion layers of PEMFCs. Journal of Power Souerces, 163(1), 113-118. DOI : 10.1016/j.jpowsour.2005.11.103
- K. S. Eom et al. (2013). Optimization of GDLs for high-performance PEMFC employing stainless steel bipolar plates. International Journal of Hydrogen Energy, 38(14), 6249-6260. DOI : 10.1016/j.ijhydene.2012.12.061
- S. Hou et al. (2020). Enhanced low-humidity performance in a proton exchange membrane fuel cell by developing a novel hydrophilic gas diffusion layer. International Journal of Hydrogen Energy, 45(1), 937-944.DOI : 10.1016/j.ijhydene.2019.10.160
- X. Zhang, Y. Yang, X. Zhang & H. Liu. (2020). Identification of performance degradations in catalyst layer and gas diffusion layer in proton exchange membrane fuel cells. Journal of Power Sources, 449, 227580. DOI : 10.1016/j.jpowsour.2019.227580
- D. H. Jeon. (2020). Effect of gas diffusion layer thickness on liquid water transport characteristics in polymer electrolyte membrane fuel cells. Journal of power Sources, 475, 228578. DOI : 10.1016/j.jpowsour.2020.228578
- G. H. Kim, D. S. Kim, J. Y. Kim, H. Kim & T. H. Park. (2020). Impact of cracked gas diffusion layer on performance of polymer electrolyte membrane fuel cells. Journal of Industrial and Engineering Chemistry, 91, 311-316. DOI : 10.1016/j.jiec.2020.08.014
- S. Shahgaldi & J. Hamelin. (2015). Improved carbon nanostructures as a novel catalyst support in the cathode side of PEMFC: a critical review. Carbon, 94, 705-728. DOI : 10.1016/j.carbon.2015.07.055
- F. Yuan, H. K. Yu & H. J. Ryua. (2004) Preparation and characterization of carbon nanofibers as catalyst support material for PEMFC. Electrochimica Acta, 50(2-3), 685-691. DOI : 10.1016/j.electacta.2004.01.106
- E. P. Ambrosio, C. Francia, M. Manzoli, N. Penazzi & P. Spinelli. (2008). Platinum catalyst supported on mesoporous carbon for PEMFC. International Journal of Hydrogen Energy, 33(12), 3142-1345. DOI : 10.1016/j.ijhydene.2008.03.045
- R. Rego, M. C. Oliveira, F. Alcaide & G. Alvarez. (2012). Development of a carbon paper-supported Pd catalyst for PEMFC application. Internatinoal Journal of Hydrogen Energy, 37(8), 7192-7199. DOI : 10.1016/j.ijhydene.2011.12.074
- Y. S. Yun, D. Y. Kim, H. H. Park, Y. S. Tak & H. J. Jin. (2012). 3D hierarchical porous carbons containing numerous nitrogen atoms as catalyst supports for PEMFCs. Synthetic Metals, 162(24), 2337-2341. DOI : 10.1016/j.synthmet.2012.11.005
- H. Wu, D. Wexler & H. Liu. (2012). Pt-Ni/C catalysts using different carbon supports for the cathode of the proton exchange membrane fuel cell (PEMFC). Materials Chemistry and Physics, 136(2-3), 845-849. DOI :10.1016/j.matchemphys.2012.08.007
- T. Suzuki, S. Tsushima & S. Hirai. (2013). Fabrication and performance evaluation of structurally-controlled PEMFC catalyst layers by blending platinum-supported and stand-alone carbon black. Journal of Power Sources, 233, 269-276. DOI : 10.1016/j.jpowsour.2013.01.092
- Y. Wang, J. Jin, S. Yang, G. Li & J. Qiao. (2015). Highly active and stable platinum catalyst supported on porous carbon nanofibers for improved performance of PEMFC. Electrochimica Acta, 177, 181-189. DOI : 10.1016/j.electacta.2015.01.134
- S. Shahgaldi & J. Hamelin. (2015). Improved carbon nanostructures as a novel catalyst support in the cathode side of PEMFC: a critical review. Carbon, 94, 705-728. DOI : 10.1016/j.carbon.2015.07.055
- A. Marinoiu et al. (2015). Graphene-based Materials Used as the Catalyst Support for PEMFC Applications. materialstoday : PROCEEDINGS, 2(6), 3797-3805. DOI : 10.1016/j.matpr.2015.08.013
- F. Labbe et al. (2018). Tin dioxide coated carbon materials as an alternative catalyst support for PEMFCs: Impacts of the intrinsic carbon properties and the synthesis parameters on the coating characteristics, Microporous and Mesoporous Materials, 271, 1-15. DOI : 10.1016/j.micromeso.2018.05.019
- R. A. MoghadamEsfahani, S. K. Vankova, E. B. Easton, I. I. Ebralidze & S. Specchia. (2020). A hybrid Pt/NbO/CNTs catalyst with high activity and durability for oxygen reduction reaction in PEMFC. Renewable Energy, 154, 913-924. DOI : 10.1016/j.renene.2020.03.029