참고문헌
- J. Lee, S. Kim, P. Lee, and B. Kim, "A Study on Reducing Condensation of Corrugated Steel Plate Magazine," J. Architectural Institute Korea Planning & Design, Vol. 27, No. 6, pp. 85-92, 2011.
- H. Jeon, S. Yoon, and J. Sohn, "Effect on Condensation Prevention in Igloo-Shaped Ammunition Depot by Forced Ventilation Using Fan in Summer," J. Korean Society Living Environmental System, Vol. 15, No. 2, pp. 257-269, 2008.
- B. Ryoo, B. Kim, and J. Yoo, "Storage Humidity Management Method of Missiles," Proc. Korean Society Propulsion Engineers, Fall Conference, pp. 687-690, 2016.
- J. F. Dunnigun, "How to Make War," William Morrow Company, New York, p. 312, 1982.
- J. Lee, S. Park, and B. Kim, "An Analysis of the Surface Condensation of Stored Ammunition in a Igloo-Magazine with Using Numerical Method," J. Architectural Institute Korea Planning & Design, Vol. 22, No. 11, pp. 297-304, 2006.
- J. Lee, S. Park, and B. Kim, "The Reform Measure for Reduce to Surface Condensation of Ammunition in Igloo Magazine," J. Architectural Institute Korea Planning & Design, Vol. 23, No. 3, pp. 215-222, 2007.
- J. Lee, and B. Kim, "The Reform Measure for Reduction of Condensation in Igloo Magazine by Computational Fluid Dynamics," J. Architectural Institute Korea Planning & Design, Vol. 24, No. 6, pp. 337-346, 2008.
- S. Park, S. Yoon, and J. Sohn, "Forced Ventilation Method for Preventing Surface Condensation of Magazine of Igloo Type in Summer," J. Korea Institute Ecological Architecture Environment, Vol. 10, No. 2, pp. 57-62, 2010.
- Korea Army, Ammunition Support Command, "The Results of Test for the Reduction of Condensation," 2019.
- Ansys, Inc., "ANSYS FLUENT Theory Guide," Pennsylvania, USA, 2013.
- J. O. Hinze, "Turbulence," McGraw-Hill Publishing Company, New York, 1975.
- T. H. Shih, W. W. Liou, A. Shabbir, Z. Yang, and J. Zhu, "A New k-ε Eddy-Viscosity Model for High Reynolds Number Turbulent Flows - Model Development and Validation," Computers & Fluids, Vol. 24, No. 3, pp. 227-238, 1995. https://doi.org/10.1016/0045-7930(94)00032-T
- Ansys, Inc., "ANSYS FLUENT 18.0 in Workbench User's Guide," Pennsylvania, USA, 2017.
- J. P. Van Doormaal, and G. D. Raithby, "Enhancements of the Simple Method for Predicting Incompressible Fluid Flow," Numerical Heat Transfer, Vol. 7, No. 2, pp. 147-163, 1984.