References
- Dzupon, Miroslav, et al. "Failure analysis of overhead power line yoke connector." Engineering Failure Analysis, vol. 33, pp.66-74, Oct., 2013. https://doi.org/10.1016/j.engfailanal.2013.04.024
- Zhu, Bin, Zhoujie Zhu, Yongmin Jin, Kai Wang, Yilin Wang, and Yisheng Zhang. "Multilayered-Sheet Hot Stamping and Application in Electric-Power-Fitting Products," Metals, vol. 9, no. 2, pp.215, Feb., 2019. https://doi.org/10.3390/met9020215
- Boonmee, Sarum, "Ductile and Compacted Graphite Iron Casting Skin-Evaluation, Effect on Fatigue Strength and Elimination," Ph.D. dissertation, Materials Science and Engineering, The Ohio State University, Columbus, OH, USA, 2013.
- Roy Elliott, "An introduction to cast irons," in "Cast iron technology,", Butterworth-Heinemann, 1st ed., London, UK, 1988.
- Stefanescu, D., et al., "Quantification of casting skin in ductile and compacted graphite irons and its effect on tensile properties," International Journal of Metalcasting, vol. 2, no. 4, pp. 7-28, Oct., 2008, https://doi.org/10.1007/BF03355433
- Bramfitt, Bruce L., and Arlan O. Benscoter, "Alteration of Microstructure" in "Metallographer's guide: practice and procedures for irons and steels," ASM International, 2001.
- Bravo, P. M., M. Preciado, and J. M. Alegre, "Failure analysis of galvanized iron pipeline accessories of a fire protection system," Engineering Failure Analysis, vol. 16, no. 2, pp.669-674, 2009 https://doi.org/10.1016/j.engfailanal.2008.02.009
- I. C. Okafor et al., "Effect of Zinc Galvanization on the Microstructure and Fracture Behavior of Low and Medium Carbon Structural Steels," Engineering, vol. 5, no. 8, pp. 656-666, Aug., 2013. https://doi.org/10.4236/eng.2013.58079
- Feldmann, Markus, et al. "New rules in DASt-Richtlinie 022 for avoiding liquid metal assisted cracking (LMAC) of prefabricated structural steel components during hot-dip galvanizing," Steel Construction: Design and Research vol. 2, no. 2, pp.119-130, 2009. https://doi.org/10.1002/stco.200910016
- James, M. N, "Residual stress influences on structural reliability," Engineering Failure Analysis vol. 18, no. 8 pp.1909-1920, 2011. https://doi.org/10.1016/j.engfailanal.2011.06.005
- Wetzel D. Batch hot dip galvanized coatings. ASM handbook. Surface engineering, vol. 5. ASM International; 1994. p. 360-71.
- James, M. Neil, "Designing against LMAC in galvanised steel structures," Engineering Failure Analysis, vol. 16, no. 4, pp. 1051-1061, 2009. https://doi.org/10.1016/j.engfailanal.2008.05.019
- Carpio, J., et al., "Stress corrosion cracking of structural steels immersed in hot-dip galvanizing baths," Engineering Failure Analysis, vol. 17, no.1, pp.19-27, 2010. https://doi.org/10.1016/j.engfailanal.2008.11.005
- Radzikowska, Janina M., "Guide to Engineered Materials", Adv. Mater. Process., vol. 159, no. 12, pp. 46, Dec., 2001.
- Marder, A. R, "The metallurgy of zinc-coated steel," Progress in materials science, vol. 45, no. 3, pp. 191-271, 2000. https://doi.org/10.1016/S0079-6425(98)00006-1
- Sun, Min, and Zhengyuan Ma, "Effects of heat-treatment and hot-dip galvanizing on mechanical properties of RHS," Journal of Constructional Steel Research, vol. 153, pp.603-617, 2019. https://doi.org/10.1016/j.jcsr.2018.11.012
- Ling, Zhanxiang, Min Wang, and Liang Kong. "Liquid metal embrittlement of galvanized steels during industrial processing: A review," Transactions on Intelligent Welding Manufacturing, Springer, Singapore, 2018. 25-42.
- Marshall, Leslie H. Embrittlement of malleable cast iron resulting from heat treatment, US Government Printing Office, no. 245, 1923.
- 奥本武臣, and 近藤賢治, "黒心可鍛鋳鉄の衝撃特性に対する熱処理時間および冷却方法の影響," 日本金属学会誌, vol. 26, no. 3, pp.204-209, 1962. (abstract only)
- 奥本武臣, and 近藤賢治. "黒心可鍛鋳鉄の衝撃特性におよぼす珪素の影響." 日本金属学会誌 26.3 (1962): 195-199. (abstract only)
- DiGiovanni, Christopher, et al. "Cracking in welded steel platform structures during hot-dip galvanization," Engineering Failure Analysis, vol. 79, pp. 1031-1042, 2017. https://doi.org/10.1016/j.engfailanal.2017.06.021
- Gagne, M., and K. I. Heyrynen. "Environmental Embrittlement of Ductile Iron," 1989.
- Clegg, R. E., and D. R. H. Jones, "Liquid metal embrittlement in failure analysis." Soviet materials science: a transl. of Fiziko-khimicheskaya mekhanika materialov/Academy of Sciences of the Ukrainian SSR, vol. 27, no. 5, pp.453-459, 1992. https://doi.org/10.1007/BF00726455
- Mraz, L., and J. Lesay. "Problems with reliability and safety of hot dip galvanized steel structures." Soldagem & inspecao 14.2 (2009): 184-190. https://doi.org/10.1590/S0104-92242009000200011
- Leighfield, C., and M. N. James, "The conclusion from one million tonnes of experience in galvanizing steel-LMAC is not a primary instigator of cracking," Engineering Failure Analysis, vol. 106, 2019
- Xiao, L., et al. "Reducing "cold shut" defects in the "H" process aided by computer simulation," International Journal of Cast Metals Research, vol. 11, no. 2, pp.71-81, 1998. https://doi.org/10.1080/13640461.1998.11819260
- Motoyama, Yuichi, et al. "Verification of the simulated residual stress in the cross section of gray cast iron stress lattice shape casting via thermal stress analysis," Metallurgical and Materials Transactions A, vol. 45, no. 4, pp.2315-2325, 2014. https://doi.org/10.1007/s11661-013-2126-8
- Kopycin ski, D., E. Guzik, and A. Szczesny. "The effect of the number of eutectic grains on coating growth during hot dip galvanising of ductile iron castings," Archives of Foundry Engineering, vol. 14, 2014.
- Torrance, J. W., and D. M. Stefanescu, "Investigation on the effect of surface roughness on the static mechanical properties of thin-wall ductile iron castings," AFS Transactions, vol. 112, pp. 757-772, Feb., 2004.