DOI QR코드

DOI QR Code

Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample

  • Zeng, Yanxia (Department of Chemical Engineering, Yangzhou University) ;
  • Zhu, Xiashi (Department of Chemical Engineering, Yangzhou University) ;
  • Xie, Jiliang (Institute of Marine Resource Development, Jiangsu Ocean University) ;
  • Chen, Li (Institute of Marine Resource Development, Jiangsu Ocean University)
  • 투고 : 2020.12.08
  • 심사 : 2021.02.03
  • 발행 : 2021.03.25

초록

A new ionic liquid functionalized magnetic silica nanoparticle was synthesized and characterized and tested as an adsorbent. The adsorbent was used for magnetic solid phase extraction on ICP-MS method. Simultaneous determination of precious metal Au has been addressed. The method is simple and fast and has been applied to standard water and surface water analysis. A new method for separation/analysis of trace precious metal Au by Magnetron Solid Phase Extraction (MSPE) combined with ICP-MS. The element to be tested is rapidly adsorbed on CoFe2O4@SiO2@[BMIM]PF6 composite nano-adsorbent and eluted with thiourea. The method has a preconcentration factor of 9.5-fold. This method has been successfully applied to the determination of gold in actual water samples. Hydrophobic Ionic Liquids (ILs) 1-butyl-3-methylimidazole hexafluorophosphate ([BMIM]PF6) coated CoFe2O4@SiO2 nanoparticles with core-shell structure to prepare magnetic solid phase extraction agent (CoFe2O4@SiO2@ILs) and establish a new method of MSPE coupled with inductively coupled plasma mass spectrometry for separation/analysis of trace gold. The results showed that trace gold was adsorbed rapidly by CoFe2O4@SiO2@[BMIM]PF6 and eluanted by thiourea. Under the optimal conditions, preconcentration factor of the proposed method was 9.5-fold. The linear range, detection limit, correlation coefficient (R) and relative standard deviation (RSD) were found to be 0.01~1000.00 ng·mL-1, 0.001 ng·mL-1, 0.9990 and 3.4% (n = 11, c = 4.5 ng·mL-1). The CoFe2O4@SiO2 nanoparticles could be used repeatedly for 8 times. This proposed method has been successfully applied to the determination of trace gold in water samples.

키워드

과제정보

This study was supported by the Postgraduate Research and Practice Innovation Program of Jiangsu Province (CXZZ13_0892, China); National Youth Science Fund Project (31300652, 41706141, China); the funding of Open subject of Jiangsu Institute of Marine Resources Development; the funding of Jiangsu Ocean University Youth Fund (kx15039, China); the funding of Practical Innovation Project for college students of Huaihai Institute of Technology (PICX132, China).

참고문헌

  1. Abedini, M. and Zhang, C. (2020a), "Blast performance of concrete columns retrofitted with FRP using segment pressure technique", Compos. Struct., 2020, 113473. https://doi.org/10.1016/j.compstruct.2020.113473.
  2. Abedini, M. and Zhang, C. (2020b), "Performance assessment of concrete and steel material models in LS-DYNA for enhanced numerical simulation, a state of the art review", Arch. Comput. Methods Eng., 2020, 1-22. https://doi.org/10.1007/s11831-020-09483-5.
  3. Abedini, M., Mutalib, A.A., Mehrmashhadi, J., Raman, S.N., Alipour, R., Momeni, T. and Mussa, M.H. (2019), "Large deflection behavior effect in reinforced concrete columns exposed to extreme dynamic loads", Front. Struct. Civ. Eng., 14(2), 532-553. https://doi.org/10.1007/s11709-020-0604-9.
  4. Abedini, M., Zhang, C., Mehrmashhadi, J. and Akhlaghi, E. (2020c), "Comparison of ALE, LBE and pressure time history methods to evaluate extreme loading effects in RC column", Structures, 28, 456-466. https://doi.org/10.1016/j.istruc.2020.08.084.
  5. Afrazi, M. (2018), "Numerical simulation of soil lateral pressure on flexible retaining walls using a hybrid discrete-finite element method", Ph.D. Dissertation, Tarbiat Modares University, Jalal, Iran.
  6. Afrazi, M. and Dehghani, M. (2014), "Choosing the best route variants base on Environmental parameters by means of remote sensing and GIS", Proceedings of the 3rd International Conference on Recent Advances in Railway Engineering, Tehran, Iran, May.
  7. Afrazi, M. and Rouhanifar, S. (2019), "Experimental study on mechanical behavior of sand-rubber mixtures", Modares Civ. Eng. J., 19(4), 83-96.
  8. Afrazi, M., Mahmoud, Y., Alitalesh, M. and Fakhimi, A.A. (2018a), "Numerical analysis of effective parameters in direct shear test by hybrid discrete - finite element method", Modares Civ. Eng. J., 18(3), 13-24.
  9. Afrazi, M., Pirjalili, A., Golshani, A.A. and Fakhournezhad, A. (2017), "MATLAB codes for finite element analysis of a tunnel", Proceeding of the 4th International Conference on Recent Innovations in Civil Engineering, Architecture and Urban Planning, Tehran, Iran, September.
  10. Afrazi, M., Yazdani, M., Radfar, S. and Rezamand, A. (2018b), "Finite element modelling of the settlement of a foundation under uniform surcharge", Proceedings of the 4th International Conference on New Developments in Soil Mechanics and Geotechnical Engineering, North Cyprus, June.
  11. Ahamed, M.A., Reza, M.I. and Al-Amin, M. (2020), "Electricity generation from speed breaker by air compression method using wells turbine", J. Adv. Eng. Comput., 4(2), 140-148. https://doi.org/10.25073/jaec.202042.277.
  12. Alam, Z., Sun, L., Zhang, C., Su, Z. and Samali, B. (2020a), "Experimental and numerical investigation on the complex behaviour of the localised seismic response in a multi-storey plan-asymmetric structure", Struct. Infrastruct. Eng., 2020, 1-17. https://doi.org/10.1080/15732479.2020.1730914.
  13. Alam, Z., Zhang, C. and Samali, B. (2020b), "Influence of seismic incident angle on response uncertainty and structural performance of tall asymmetric structure", Struct. Des. Tall Special Build., 29(12), e1750. https://doi.org/10.1002/tal.1750.
  14. Alam, Z., Zhang, C. and Samali, B. (2020c), "The role of viscoelastic damping on retrofitting seismic performance of asymmetric reinforced concrete structures", Earthq. Eng. Eng. Vib., 19(1), 223-237. https://doi.org/10.1007/s11803-020-0558-x.
  15. Alaskar, A., Shah, S., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020), "Development of Pozzolanic material from clay", Adv. Concrete Constr., 10(4), 301-310. https://doi.org/10.12989/acc.2020.10.4.301.
  16. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187.
  17. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147.
  18. Amiri, M., Salavati-Niasari, M., Akbari, A. and Razavi, R. (2017a), "Sol-gel auto-combustion synthesize and characterization of a novel anticorrosive cobalt ferrite nanoparticles dispersed in silica matrix", J. Mater. Sci. Mater. Electron., 28(14), 10495-10508. https://doi.org/10.1007/s10854-017-6823-8.
  19. Amiri, M., Salavati-Niasari, M., Pardakhty, A., Ahmadi, M. and Akbari, A. (2017b), "Caffeine: A novel green precursor for synthesis of magnetic CoFe2O4 nanoparticles and pH-sensitive magnetic alginate beads for drug delivery", Mater. Sci. Eng. C, 76, 1085-1093. https://doi.org/10.1016/j.msec.2017.03.208.
  20. Arif, M.Z., Ahmed, R., Sadia, U.H., Tultul, M.S.I. and Chakma, R. (2020), "Decision tree method using for fetal state classification from cardiotography data", J. Adv. Eng. Comput., 4(1), 64-73. https://doi.org/10.25073/jaec.202041.273.
  21. Awual, M.R. (2016), "Solid phase sensitive palladium (II) ions detection and recovery using ligand based efficient conjugate nanomaterials", Chem. Eng. J., 300, 264-272. https://doi.org/10.1016/j.cej.2016.04.071.
  22. Aziz-Zanjani, M.O. and Mehdinia, A. (2014), "A review on procedures for the preparation of coatings for solid phase microextraction", Microchim. Acta, 181(11-12), 1169-1190. https://doi.org/10.1007/s00604-014-1265-y.
  23. Bazilevs, Y., Takizawa, K., Tezduyar, T.E., Hsu, M.C., Otoguro, Y., Mochizuki, H. and Wu, M.C.H. (2020), "Wind turbine and turbomachinery computational analysis with the ALE and space-time variational multiscale methods and isogeometric discretization", J. Adv. Eng. Comput., 4(1), 1-32. https://doi.org/10.25073/jaec.202041.278.
  24. Behbahani, M., Bagheri, A., Gorji, T., Nabid, M.R., Sedghi, R., Oskooie, H.A. and Heravi, M.M. (2013), "Application of poly (N-phenylethanolamine) modified MWCNTs as a new sorbent for solid-phase extraction of trace palladium ions in soil and water samples", Sample Prep., 1(2013), 10-17. https://doi.org/10.2478/sampre-2013-0002.
  25. Behbahani, M., Najafi, F., Amini, M.M., Sadeghi, O., Bagheri, A. and Hassanlou, P.G. (2014), "Solid phase extraction using nanoporous MCM-41 modified with 3, 4-dihydroxybenzaldehyde for simultaneous preconcentration and removal of gold (III), palladium (II), copper (II) and silver (I)", J. Ind. Eng. Chem., 20(4), 2248-2255. https://doi.org/10.1016/j.jiec.2013.09.057.
  26. Cao, L. (2020), "Changing port governance model: Port spatial structure and trade efficiency", J. Coast. Res., 95, 963-968. https://doi.org/10.2112/SI95-187.1.
  27. Cao, Y., Alyousef, R., Baharom, S., Shah, S., Alaskar, A., Alabduljabbar, H., Mustafa Mohamed, A. and Assilzadeh, H. (2020), "Dynamic attainment of mixed aspect ratio for concrete members reinforced with steel fiber under impact loading", Mech. Adv. Mater. Struct., 1-10. https://doi.org/10.1080/15376494.2020.1847371.
  28. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Struct., 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031.
  29. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020), "Application of extreme learning machine in behavior of beam to column connections", Struct., 25, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058.
  30. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567.
  31. Chang, S.H. (2020), "Gold (III) recovery from aqueous solutions by raw and modified chitosan: A review", Carbohydr. Polym., 2020,117423. https://doi.org/10.1016/j.carbpol.2020.117423.
  32. Chen, H., Du, P., Chen, J., Hu, S., Li, S. and Liu, H. (2010), "Separation and preconcentration system based on ultrasonic probe-assisted ionic liquid dispersive liquid-liquid microextraction for determination trace amount of chromium (VI) by electrothermal atomic absorption spectrometry", Talanta, 81(1-2), 176-179. https://doi.org/10.1016/j.talanta.2009.11.054.
  33. Chen, J. and Zhu, X. (2015), "Ionic liquid coated magnetic core/shell Fe3O4@SiO2 nanoparticles for the separation/analysis of linuron in food samples", Spectrochim. Acta A Mol. Biomol. Spectrosc., 137, 456-462. https://doi.org/10.1016/j.saa.2014.08.113.
  34. Chen, J. and Zhu, X. (2016), "Magnetic solid phase extraction using ionic liquid-coated core-shell magnetic nanoparticles followed by high-performance liquid chromatography for determination of Rhodamine B in food samples", Food Chem., 200, 10-15. https://doi.org/10.1016/j.foodchem.2016.01.002.
  35. Chen, S., Hassanzadeh-Aghdam, M. and Ansari, R. (2018a), "An analytical model for elastic modulus calculation of SiC whisker-reinforced hybrid metal matrix nanocomposite containing SiC nanoparticles", J. Alloys Compd., 767, 632-641. https://doi.org/10.1016/j.jallcom.2018.07.102.
  36. Chen, X., Wang, D., Wang, T., Yang, Z., Zou, X., Wang, P., Luo, W., Li, Q., Liao, L. and Hu, W. (2019), "Enhanced photoresponsivity of a GaAs nanowire metal-semiconductor-metal photodetector by adjusting the fermi level", ACS Appl. Mater. Interf., 11(36), 33188-33193. https://doi.org/10.1021/acsami.9b07891.
  37. Chen, Y., He, L., Guan, Y., Lu, H. and Li, J. (2017), "Life cycle assessment of greenhouse gas emissions and water-energy optimization for shale gas supply chain planning based on multi-level approach: Case study in Barnett, Marcellus, Fayetteville, and Haynesville shales", Energy Convers. Manag., 134, 382-398. https://doi.org/10.1016/j.enconman.2016.12.019.
  38. Chen, Y., He, L., Li, J. and Zhang, S. (2018b), "Multi-criteria design of shale-gas-water supply chains and production systems towards optimal life cycle economics and greenhouse gas emissions under uncertainty", Comput. Chem. Eng., 109, 216-235. https://doi.org/10.1016/j.compchemeng.2017.11.014.
  39. Chen, Y., Li, J., Lu, H. and Yan, P. (2021), "Coupling system dynamics analysis and risk aversion programming for optimizing the mixed noise-driven shale gas-water supply chains", J. Cleaner Prod., 278, 123209. https://doi.org/10.1016/j.jclepro.2020.123209.
  40. Cheng, X., He, L., Lu, H., Chen, Y. and Ren, L. (2016), "Optimal water resources management and system benefit for the Marcellus shale-gas reservoir in Pennsylvania and West Virginia", J. Hydrol., 540, 412-422. https://doi.org/10.1016/j.jhydrol.2016.06.041.
  41. Cui, D., Li, J., Zhang, X., Zhang, L., Chang, H. and Wang, Q. (2021), "Pyrolysis temperature effect on compositions of basic nitrogen species in Huadian shale oil using positive-ion ESI FTICR MS and GC-NCD", J. Anal. Appl. Pyrolysis, 153, 104980. https://doi.org/10.1016/j.jaap.2020.104980.
  42. Deng, Y., Zhang, T., Clark, J., Aminabhavi, T., Kruse, A., Tsang, D.C., Sharma, B.K., Zhang, F. and Ren, H. (2020), "Mechanisms and modelling of phosphorus solid-liquid transformation during the hydrothermal processing of swine manure", Green Chem., 22(17), 5628-5638. https://doi.org/10.1039/D0GC01281E.
  43. Deng, Y., Zhang, T., Sharma, B. K. and Nie, H. (2019), "Optimization and mechanism studies on cell disruption and phosphorus recovery from microalgae with magnesium modified hydrochar in assisted hydrothermal system", Sci. Total Environ., 646, 1140-1154. https://doi.org/10.1016/j.scitotenv.2018.07.369.
  44. Dinh-Cong, D., Keykhosravi, M.H., Alyousef, R., Salih, M.N., Nguyen, H., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Poi-Ngian, S. (2019), "The effect of wollastonite powder with pozzolan micro silica in conventional concrete containing recycled aggregate", Smart Struct. Syst., 24(4), 541-552. https://doi.org/10.12989/sss.2019.24.4.541.
  45. Fanaie, N. and Dizaj, E.A. (2014), "Response modification factor of the frames braced with reduced yielding segment BRB", Struct. Eng. Mech., Int. J., 50(1), 1-17. http://dx.doi.org/10.12989/sem.2014.50.1.001.
  46. Fanaie, N. and Shamlou, S.O. (2015b), "Response modification factor of mixed structures", Steel Compos. Struct., Int J., 19(6), 1449-1466. https://doi.org/10.12989/scs.2015.19.6.1449.
  47. Fanaie, N., Aghajani, S. and Afsar Dizaj, E. (2016a), "Strengthening of moment-resisting frame using cable-cylinder bracing", Adv. Struct. Eng., 19(11), 1736-1754. https://doi.org/10.1177/1369433216649382.
  48. Fanaie, N., Aghajani, S. and Dizaj, E.A. (2016b), "Theoretical assessment of the behavior of cable bracing system with central steel cylinder", Adv. Struct. Eng., 19(3), 463-472. https://doi.org/10.1177/1369433216630052.
  49. Fanaie, N., Aghajani, S. and Shamloo, S. (2012), "Theoretical assessment of wire rope bracing system with soft central cylinder", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal, September.
  50. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015a), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., Int J., 19(2), 485-501. https://doi.org/10.12989/scs.2015.19.2.485.
  51. Fang, D., Cheng, J., Gong, K., Shi, Q.R., Zhou, X.L. and Liu, Z.L. (2008), "A green and novel procedure for the preparation of ionic liquid", J. Fluorine Chem., 129(2), 108-111. https://doi.org/10.1016/j.jfluchem.2007.09.004.
  52. Feng, S., Lu, H., Tian, P., Xue, Y., Lu, J., Tang, M. and Feng, W. (2020a), "Analysis of microplastics in a remote region of the Tibetan plateau: Implications for natural environmental response to human activities", Sci. Total Environ., 739, 140087. https://doi.org/10.1016/j.scitotenv.2020.140087.
  53. Feng, W., Lu, H., Yao, T. and Yu, Q. (2020b), "Drought characteristics and its elevation dependence in the Qinghai-Tibet plateau during the last half-century", Sci. Rep., 10(1), 1-11. https://doi.org/10.1038/s41598-020-71295-1.
  54. Ganesan, T., Vasant, P., Sanghvi, P., Thomas, J. and Litvinchev, I. (2020), "Random matrix generators for optimizing a fuzzy biofuel supply chain system", J. Adv. Eng. Comput., 4(1), 33-50. https://doi.org/10.25073/jaec.202041.268.
  55. Gao, N. and Lu, K. (2020), "An underwater metamaterial for broadband acoustic absorption at low frequency", Appl. Acoust., 169, 107500. https://doi.org/10.1016/j.apacoust.2020.107500.
  56. Gao, N., Tang, L., Deng, J., Lu, K., Hou, H. and Chen, K. (2021), "Design, fabrication and sound absorption test of composite porous metamaterial with embedding i-plates into porous polyurethane sponge", Appl. Acoust., 175, 107845. https://doi.org/10.1016/j.apacoust.2020.107845.
  57. Gholipour, G., Zhang, C. and Mousavi, A.A. (2020a), "Nonlinear numerical analysis and progressive damage assessment of a cable-stayed bridge pier subjected to ship collision", Marine Struct., 69, 102662. https://doi.org/10.1016/j.marstruc.2019.102662.
  58. Gholipour, G., Zhang, C. and Mousavi, A.A. (2020b), "Numerical analysis of axially loaded RC columns subjected to the combination of impact and blast loads", Eng. Struct., 219, 110924. https://doi.org/10.1016/j.engstruct.2020.110924.
  59. Ghorbani-Kalhor, E., Behbahani, M. and Abolhasani, J. (2015), "Application of ion-imprinted polymer nanoparticles for selective trace determination of palladium ions in food and environmental samples with the aid of experimental design methodology", Food Anal. Methods, 8(7), 1746-1757. https://doi.org/10.1007/s12161-014-0057-7.
  60. Ha, C.N., Anh-Thy, P.C. and Dibya Jyoti, B. (2018), "A new fuzzy rule based contrast enhancement method using the two-steps automatic clustering algorithm", J. Adv. Eng. Comput., 2(4), 239-250. https://doi.org/10.25073/jaec.201824.214.
  61. Han, X., Zhang, D., Yan, J., Zhao, S. and Liu, J. (2020), "Process development of flue gas desulphurization wastewater treatment in coal-fired power plants towards zero liquid discharge: Energetic, economic and environmental analyses", J. Cleaner Prod., 261, 121144. https://doi.org/10.1016/j.jclepro.2020.121144.
  62. He, L., Chen, Y. and Li, J. (2018a), "A three-level framework for balancing the tradeoffs among the energy, water, and air-emission implications within the life-cycle shale gas supply chains", Resour. Conserv. Recycl., 133, 206-228. https://doi.org/10.1016/j.resconrec.2018.02.015.
  63. He, L., Chen, Y., Zhao, H., Tian, P., Xue, Y. and Chen, L. (2018b), "Game-based analysis of energy-water nexus for identifying environmental impacts during Shale gas operations under stochastic input", Sci. Total Environ., 627, 1585-1601. https://doi.org/10.1016/j.scitotenv.2018.02.004.
  64. He, L., Shen, J. and Zhang, Y. (2018c), "Ecological vulnerability assessment for ecological conservation and environmental management", J. Environ. Manag., 206, 1115-1125. https://doi.org/10.1016/j.jenvman.2017.11.059.
  65. He, M., Huang, L., Zhao, B., Chen, B. and Hu, B. (2017), "Advanced functional materials in solid phase extraction for ICP-MS determination of trace elements and their species-a review", Anal. Chimica Acta, 973, 1-24. https://doi.org/10.1016/j.aca.2017.03.047.
  66. Hu, X., Chong, H.Y. and Wang, X. (2019), "Sustainability perceptions of off-site manufacturing stakeholders in Australia", J. Cleaner Prod., 227, 346-354. https://doi.org/10.1016/j.jclepro.2019.03.258.
  67. Hu, Y., Chen, Q., Feng, S. and Zuo, C. (2020), "Microscopic fringe projection profilometry: A review", Optics Lasers Eng., 135, 106192. https://doi.org/10.1016/j.optlaseng.2020.106192.
  68. Huang, J., Alyousef, R., Suhatril, M., Baharom, S., Alabduljabbar, H., Alaskar, A. and Assilzadeh, H. (2020), "Influence of porosity and cement grade on concrete mechanical properties", Adv. Concrete Constr., 10(5), 393-402. https://doi.org/10.12989/acc.2020.10.5.393.
  69. Huang, Z., Zheng, H., Guo, L. and Mo, D. (2020), "Influence of the position of artificial boundary on computation accuracy of conjugated infinite element for a finite length cylindrical shell", Acoust. Australia, 48(2), 287-294. https://doi.org/10.1007/s40857-020-00175-5.
  70. Hyder, M.M.Z. and Ochiai, B. (2018), "Selective recovery of Au (III), Pd (II), and Ag (I) from printed circuit boards using cellulose filter paper grafted with polymer chains bearing thiocarbamate moieties", Microsyst. Technol., 24(1), 683-690. https://doi.org/10.1007/s00542-017-3277-0.
  71. Inoue, K., Gurung, M., Xiong, Y., Kawakita, H., Ohto, K. and Alam, S. (2015), "Hydrometallurgical recovery of precious metals and removal of hazardous metals using persimmon tannin and persimmon wastes", Metals, 5(4), 1921-1956. https://doi.org/10.3390/met5041921.
  72. Jia, L., Liu, B., Zhao, Y., Chen, W., Mou, D., Fu, J., Wang, Y., Xin, W. and Zhao, L. (2020a), "Structure design of MoS2@Mo2C on nitrogen-doped carbon for enhanced alkaline hydrogen evolution reaction", J. Mater. Sci., 55(34), 16197-16210. https://doi.org/10.1007/s10853-020-05107-2.
  73. Jia, L.C., Jin, Y.F., Ren, J., Zhao, L., Yan, D.X. and Li, Z.M. (2021), "Highly thermally conductive liquid metal-based composites with superior thermostability for thermal management", J. Mater. Chem. C, 2021, 1-13. https://doi.org/10.1039/D0TC05493C.
  74. Jia, Q., Huang, S., Hu, M., Song, Y., Wang, M., Zhang, Z. and He, L. (2020b), "Polyoxometalate-derived MoS2 nanosheets embedded around iron-hydroxide nanorods as the platform for sensitively determining miRNA-21", Sens. Actuators B Chem., 323, 128647. https://doi.org/10.1016/j.snb.2020.128647.
  75. Jiao, S.Q., Jiao, H.D., Song, W.L., Wang, M.Y. and Tu, J.G. (2020), "A review on liquid metals as cathodes for molten salt/oxide electrolysis", Int. J. Miner., Metal. Mater., 27, 1588-1598. https://doi.org/10.1007/s12613-020-1971-x.
  76. Jiao, S.Q., Wang, M.Y. and Song, W.L. (2020), "Editorial for special issue on high-temperature molten salt chemistry and technology", Int. J. Miner., Metal. Mater., 27(12), 1569-1571. https://doi.org/10.1007/s12613-020-2225-7.
  77. Ju, Y., Shen, T. and Wang, D. (2020), "Bonding behavior between reactive powder concrete and normal strength concrete", Constr. Build. Mater., 242, 118024. https://doi.org/10.1016/j.conbuildmat.2020.118024.
  78. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 2019, 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  79. Kordestani, H. and Zhang, C. (2020a), "Direct use of the savitzkygolay filter to develop an output-only trend line-based damage detection method", Sensors, 20(7), 1983. https://doi.org/10.3390/s20071983.
  80. Kordestani, H., Zhang, C. and Shadabfar, M. (2020b), "Beam damage detection under a moving load using random decrement technique and Savitzky-Golay filter", Sensors, 20(1), 243. https://doi.org/10.3390/s20010243.
  81. Li, C., Sun, L., Xu, Z., Wu, X., Liang, T. and Shi, W. (2020a), "Experimental investigation and error analysis of high precision FBG displacement sensor for structural health monitoring", Int. J. Struct. Stab. Dyn., 20(6), 2040011. https://doi.org/10.1142/S0219455420400118.
  82. Li, H., Zhang, T., Tsang, D.C. and Li, G. (2020b), "Effects of external additives: Biochar, bentonite, phosphate, on co-composting for swine manure and corn straw", Chemosphere, 248, 125927. https://doi.org/10.1016/j.chemosphere.2020.125927.
  83. Li, X., Zhang, R., Zhang, X., Zhu, P. and Yao, T. (2020c), "Silver-catalyzed decarboxylative allylation of difluoroarylacetic acids with allyl sulfones in water", Chem. Asian J., 15(7), 1175-1179. https://doi.org/10.1002/asia.202000059.
  84. Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743.
  85. Liu, G., Ren, G., Zhao, L., Cheng, L., Wang, C. and Sun, B. (2017), "Antibacterial activity and mechanism of bifidocin against Listeria monocytogenes", Food Control, 73, 854-861. https://doi.org/10.1016/j.foodcont.2016.09.036
  86. Liu, H., Liu, X., Zhao, F., Liu, Y., Liu, L., Wang, L., Geng, C. and Huang, P. (2020a), "Preparation of a hydrophilic and antibacterial dual function ultrafiltration membrane with quaternized graphene oxide as a modifier", J. Colloid Interf. Sci., 562, 182-192. https://doi.org/10.1016/j.jcis.2019.12.017.
  87. Liu, J., Wang, C., Sun, H., Wang, H., Rong, F., He, L., Lou, Y., Zhang, S., Zhang, Z. and Du, M. (2020b), "CoOx/CoNy nanoparticles encapsulated carbon-nitride nanosheets as an efficiently trifunctional electrocatalyst for overall water splitting and Zn-air battery", Appl. Catal. B Environ., 279, 119407. https://doi.org/10.1016/j.apcatb.2020.119407.
  88. Liu, J., Wu, C., Wu, G. and Wang, X. (2015), "A novel differential search algorithm and applications for structure design", Appl. Math. Comput., 268, 246-269. https://doi.org/10.1016/j.amc.2015.06.036.
  89. Liu, L., Li, D., Ma, Y., Shen, H., Zhao, S. and Wang, Y. (2020c), "Combined application of arbuscular mycorrhizal fungi and exogenous melatonin alleviates drought stress and improves plant growth in tobacco seedlings", J. Plant Growth Regul., 2020, 1-14. https://doi.org/10.1007/s00344-020-10165-6.
  90. Liu, L., Li, J., Yue, F., Yan, X., Wang, F., Bloszies, S. and Wang, Y. (2018), "Effects of arbuscular mycorrhizal inoculation and biochar amendment on maize growth, cadmium uptake and soil cadmium speciation in Cd-contaminated soil", Chemosphere, 194, 495-503. https://doi.org/10.1016/j.chemosphere.2017.12.025.
  91. Liu, Y., Hu, B., Wu, S., Wang, M., Zhang, Z., Cui, B., He, L. and Du, M. (2019), "Hierarchical nanocomposite electrocatalyst of bimetallic zeolitic imidazolate framework and MoS2 sheets for non-Pt methanol oxidation and water splitting", Appl. Catal. B Environ., 258, 117970. https://doi.org/10.1016/j.apcatb.2019.117970.
  92. Liu, Y., Xu, T., Liu, Y., Gao, Y. and Di, C. (2020d), "Wear and heat shock resistance of Ni-WC coating on mould copper plate fabricated by laser", J. Mater. Res. Technol., 9(4), 8283-8288. https://doi.org/10.1016/j.jmrt.2020.05.083.
  93. Long, Q., Wu, C. and Wang, X. (2015), "A system of nonsmooth equations solver based upon subgradient method", Appl. Math. Comput., 251, 284-299. https://doi.org/10.1016/j.amc.2014.11.064.
  94. Lu, H., Guan, Y., He, L., Adhikari, H., Pellikka, P., Heiskanen, J. and Maeda, E. (2020), "Patch aggregation trends of the global climate landscape under future global warming scenario", Int. J. Climatol., 40(5), 2674-2685. https://doi.org/10.1002/joc.6358.
  95. Lu, H., Tian, P. and He, L. (2019), "Evaluating the global potential of aquifer thermal energy storage and determining the potential worldwide hotspots driven by socio-economic, geo-hydrologic and climatic conditions", Renew. Sustain. Energy Rev., 112, 788-796. https://doi.org/10.1016/j.rser.2019.06.013.
  96. Lu, Z., Dai, J., Song, X., Wang, G. and Yang, W. (2008), "Facile synthesis of Fe3O4/SiO2 composite nanoparticles from primary silica particles", Colloids Surf. A Physicochem. Eng. Aspects, 317(1-3), 450-456. https://doi.org/10.1016/j.colsurfa.2007.11.020.
  97. Majedi, M., Afrazi, M. and Fakhimi, A. (2020a), "FEM-BPM simulation of SHPB testing for measurement of rock tensile strength", Proceedings of the 54th US Rock Mechanics / Geomechanics Symposium, Colorado, USA, July.
  98. Majedi, M.R., Afrazi, M. and Fakhimi, A. (2020b), "A micromechanical model for simulation of rock failure under high strain rate loading", Int. J. Civ. Eng., 2020, 1-15. https://doi.org/10.1007/s40999-020-00551-2.
  99. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6
  100. Marwani, H.M., Albishri, H.M., Jalal, T.A. and Soliman, E.M. (2012), "Activated carbon immobilized dithizone phase for selective adsorption and determination of gold (III)", Desalin. Water Treat., 45(1-3), 128-135. https://doi.org/10.1080/19443994.2012.692019.
  101. Mehdinia, A., Jebeliyan, M., Kayyal, T. B. and Jabbari, A. (2017), "Rattle-type Fe3O4@SnO2 core-shell nanoparticles for dispersive solid-phase extraction of mercury ions", Microchim. Acta, 184(3), 707-713. https://doi.org/10.1007/s00604-016-2059-1.
  102. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A, 53, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  103. Moghaddam, H., Fanaie, N. and Hamzehloo, H. (2009), "Uniform hazard response spectra and ground motions for Tabriz", J. Sci. Iran., 16(3), 238-248.
  104. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. https://doi.org/10.12989/sem.2013.46.6.853.
  105. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., Int. J., 14(5), 785-809. https://doi.org/10.12989/sss.2014.14.5.785.
  106. Mou, B., Zhao, F., Qiao, Q., Wang, L., Li, H., He, B. and Hao, Z. (2019), "Flexural behavior of beam to column joints with or without an overlying concrete slab", Eng. Struct., 199, 109616. https://doi.org/10.1016/j.engstruct.2019.109616.
  107. Mousavi, A.A., Zhang, C., Masri, S.F. and Gholipour, G. (2020), "Structural damage localization and quantification based on a CEEMDAN Hilbert transform neural network approach: A model steel truss bridge case study", Sensors, 20(5), 1271. https://doi.org/10.3390/s20051271.
  108. Nguyen-Thi, K.N., Che-Ngoc, H. and Pham-Chau, A.T. (2020), "An efficient image contrast enhancement method using sigmoid function and differential evolution", J. Adv. Eng. Comput., 4(3), 162-172. https://doi.org/10.25073/jaec.202043.267.
  109. Pham, N.T., Dang, N.M.D. and Nguyen, S.D. (2021), "A method upon deep learning for speech emotion recognition", J. Adv. Eng. Comput., 4(4), 273-285. https://doi.org/10.25073/jaec.202044.311.
  110. Pho, K.H. and Truong, B.C. (2020), "Comparison of the performance of the gradient and Newton-Raphson method to estimate parameters in some zero-inflated regression models", J. Adv. Eng. Comput., 4(4), 227-250. https://doi.org/10.25073/jaec.202044.297.
  111. Qi, C. and Fourie, A. (2019), "Cemented paste backfill for mineral tailings management: Review and future perspectives", Min. Eng., 144, 106025. https://doi.org/10.1016/j.mineng.2019.106025.
  112. Qi, C., Chen, Q. and Kim, S. (2020), "Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multi-objective optimization", Miner. Eng., 155, 106422. https://doi.org/10.1016/j.mineng.2020.106422.
  113. Qi, C., Chen, Q. and Kim, S.S. (2020), "Integrated and intelligent design framework for cemented paste backfill: A combination of robust machine learning modelling and multi-objective optimization", Min. Eng., 155, 106422. https://doi.org/10.1016/j.mineng.2020.106422.
  114. Qi, C., Fourie, A., Chen, Q. and Liu, P. (2019), "Application of first-principles theory in ferrite phases of cemented paste backfill", Min. Eng., 133, 47-51. https://doi.org/10.1016/j.mineng.2019.01.011.
  115. Qi, C., Guo, L., Ly, H.-B., Le, H. V. and Pham, B. T. (2021), "Improving pressure drops estimation of fresh cemented paste backfill slurry using a hybrid machine learning method", Minerals Engineering 163, 106790 DOI: https://doi.org/10.1016/j.mineng.2021.106790.
  116. Qi, C., Spagnoli, D. and Fourie, A. (2020), "DFT-D study of single water adsorption on low-index surfaces of calcium silicate phases in cement", Appl. Surf. Sci., 518, 146255. https://doi.org/10.1016/j.apsusc.2020.146255.
  117. Qi, C., Spagnoli, D. and Fourie, A. (2020), "Structural, electronic, and mechanical properties of calcium aluminate cements: Insight from first-principles theory", Constr. Build. Mater., 264, 120259. https://doi.org/10.1016/j.conbuildmat.2020.120259.
  118. Qian, J., Feng, S., Li, Y., Tao, T., Han, J., Chen, Q. and Zuo, C. (2020a), "Single-shot absolute 3D shape measurement with deep-learning-based color fringe projection profilometry", Opt. Lett., 45(7), 1842-1845. https://doi.org/10.1364/OL.388994.
  119. Qian, J., Feng, S., Tao, T., Hu, Y., Li, Y., Chen, Q. and Zuo, C. (2020b), "Deep-learning-enabled geometric constraints and phase unwrapping for single-shot absolute 3D shape measurement", APL Photon., 5(4), 046105. https://doi.org/10.1063/5.0003217.
  120. Radi, S., Tighadouini, S., El Massaoudi, M., Hadda, T.B., Zaghrioui, M., Bacquet, M., Dacquin, J. and Warad, I. (2014), "Synthesis of 1-(Pyrrol-2-yl) imine modified silica as a new sorbent for the removal of toxic metals from aqueous solutions", J. Mater. Environ. Sci., 5, 1280-1287.
  121. Rahimi, Z., Sarafraz, H., Alahyarizadeh, G. and Shirani, A. (2018), "Hydrothermal synthesis of magnetic CoFe2O4 nanoparticles and CoFe2O4/MWCNTs nanocomposites for U and Pb removal from aqueous solutions", J. Radioanal. Nucl. Chem., 317(1), 431-442. https://doi.org/10.1007/s10967-018-5894-1.
  122. Reuter, M. and Van Schaik, A. (2016), "Gold-A key enabler of a circular economy: Recycling of waste electric and electronic equipment", Gold Ore Process., 2016, 937-958. https://doi.org/10.1016/B978-0-444-63658-4.00053-0.
  123. Rouhanifar, S., Afrazi, M., Fakhimi, A. and Yazdani, M. (2020), "Strength and deformation behaviour of sand-rubber mixture", Int. J. Geotech. Eng., 2020, 1-15. https://doi.org/10.1080/19386362.2020.1812193.
  124. Roy, S.K., Nayak, D., Dash, N., Dhawan, N. and Rath, S.S. (2020), "Microwave-assisted reduction roasting-magnetic separation studies of two mineralogically different low-grade iron ores", Int. J. Miner., Metal. Mater., 27(11), 1449-1461. https://doi.org/10.1007/s12613-020-1992-5.
  125. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., Int. J., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.
  126. Safa, M., Sari, P.A., Shariat, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  127. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Statist. Mech. Its Appl., 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  128. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. http://dx.doi.org/10.12989/scs.2016.21.3.679.
  129. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., Int. J., 22(3), 335-340. http://dx.doi.org/10.12989/sss.2018.22.3.335.
  130. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 2020, 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  131. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155. https://doi.org/10.12989/scs.2020.34.1.155.
  132. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183. https://doi.org/10.12989/sss.2020.25.2.183.
  133. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y. Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  134. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y. Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  135. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and PoiNgian, S. (2019), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  136. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  137. Shen, C.L., Lou, Q., Zang, J.H., Liu, K.K., Qu, S.N., Dong, L. and Shan, C.X. (2020), "Near-infrared chemiluminescent carbon nanodots and their application in reactive oxygen species bioimaging", Adv. Sci., 7(8), 1903525. https://doi.org/10.1002/advs.201903525.
  138. Shi, M., Wang, B., Shen, Y., Jiang, J., Zhu, W., Su, Y., Narayanasamy, M., Angaiah, S., Yan, C. and Peng, Q. (2020), "3D assembly of MXene-stabilized spinel ZnMn2O4 for highly durable aqueous zinc-ion batteries", Chem. Eng. J., 399, 125627. https://doi.org/10.1016/j.cej.2020.125627.
  139. Singh, V., Gu, N. and Wang, X. (2011), "A theoretical framework of a BIM-based multi-disciplinary collaboration platform", Auto. Constr., 20(2), 134-144. https://doi.org/10.1016/j.autcon.2010.09.011.
  140. Stober, W., Fink, A. and Bohn, E. (1968), "Controlled growth of monodisperse silica spheres in the micron size range", J. Colloid Interf. Sci., 26(1), 62-69. https://doi.org/10.1016/0021-9797(68)90272-5.
  141. Sun, L., Li, C., Zhang, C., Liang, T. and Zhao, Z. (2019a), "The strain transfer mechanism of fiber bragg grating sensor for extra large strain monitoring", Sensors, 19(8), 1851. https://doi.org/10.3390/s19081851.
  142. Sun, L., Li, C., Zhang, C., Su, Z. and Chen, C. (2018), "Early monitoring of rebar corrosion evolution based on FBG sensor", Int. J. Struct. Stab. Dyn., 18(8), 1840001. https://doi.org/10.1142/S0219455418400011.
  143. Sun, L., Su, Z., Xia, Y., Zhang, C. and Li, C. (2019b), "Superwide-range fiber bragg rating displacement sensor based on an eccentric gear: Principles and experiments", J. Aerosp. Eng., 32(1), 04018129. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000960.
  144. Sun, L., Yang, Z., Jin, Q. and Yan, W. (2020a), "Effect of axial compression ratio on seismic behavior of GFRP reinforced concrete columns", Int. J. Struct. Stab. Dyn., 20(6), 2040004. https://doi.org/10.1142/S0219455420400040.
  145. Sun, Y., Wang, J., Wu, J., Shi, W., Ji, D., Wang, X. and Zhao, X. (2020b), "Constraints hindering the development of high-rise modular buildings", Appl. Sci., 10(20), 7159. https://doi.org/10.3390/app10207159
  146. Takizawa, K., Bazilevs, Y., Tezduyar, T.E. and Korobenko, A. (2020), "Computational flow analysis in aerospace, energy and transportation technologies with the variational multiscale methods", J. Adv. Eng. Comput., 4(2), 83-117. https://doi.org/10.25073/jaec.202042.279.
  147. Takizawa, K., Bazilevs, Y.E., Tezduyar, T. and Hsu, M.C. (2019), "Computational cardiovascular flow analysis with the variational multiscale methods", J. Adv. Eng. Comput., 3(2), 366-405. https://doi.org/10.25073/jaec.201932.245.
  148. Tian, P., Lu, H., Feng, W., Guan, Y. and Xue, Y. (2020), "Large decrease in streamflow and sediment load of Qinghai-Tibetan Plateau driven by future climate change: A case study in Lhasa River basin", Catena, 187, 104340. https://doi.org/10.1016/j.catena.2019.104340.
  149. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623.
  150. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 1-9. https://doi.org/10.1007/s10845-016-1217-y.
  151. Tran, C.D., Brandstetter, P., Dinh, B.H., Ho, S.D. and Nguyen, M. H.C. (2018a), "Current-sensorless method for speed control of induction motor based on hysteresis pulse width modulation technique", J. Adv. Eng. Comput., 2(4), 271-280. https://doi.org/10.25073/jaec.201824.213.
  152. Tran, P.M. and Nguyen, N.T. (2018b), "Numerical determination of truncation orders in the correction method for Stokes equations", J. Adv. Eng. Comput., 2(1), 44-54. https://doi.org/10.25073/jaec.201821.85.
  153. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  154. Tsai, Y.H., Wang, J., Chien, W.T., Wei, C.Y., Wang, X. and Hsieh, S.H. (2019), "A BIM-based approach for predicting corrosion under insulation", Auto. Constr., 107, 102923. https://doi.org/10.1016/j.autcon.2019.102923.
  155. Tu, Z., Lu, S., Chang, X., Li, Z., Hu, Z., Zhang, L. and Tian, H. (2011), "Selective solid-phase extraction and separation of trace gold, palladium and platinum using activated carbon modified with ethyl-3-(2-aminoethylamino)-2-chlorobut-2-enoate", Microchim. Acta, 173(1-2), 231-239. https://doi.org/10.1007/s00604-011-0552-0.
  156. Vojoudi, H., Badiei, A., Banaei, A., Bahar, S., Karimi, S., Ziarani, G.M. and Ganjali, M.R. (2017), "Extraction of gold, palladium and silver ions using organically modified silica-coated magnetic nanoparticles and silica gel as a sorbent", Microchim. Acta, 184(10), 3859-3866. https://doi.org/10.1007/s00604-017-2414-x
  157. Wang, B., Song, Z. and Sun, L. (2020a), "A review: Comparison of multi-air-pollutant removal by advanced oxidation processes--industrial implementation for catalytic oxidation processes", Chem. Eng. J., 2020, 128136. https://doi.org/10.1016/j.cej.2020.128136.
  158. Wang, H., Huang, J., Ding, L., Li, D. and Han, Y. (2011), "A facile synthesis of monodisperse CoFe2O4/SiO2 nanoparticles", Appl. Surf. Sci., 257(16), 7107-7112. https://doi.org/10.1016/j.apsusc.2011.03.063.
  159. Wang, J., Liu, M., Chen, T., Chen, J., Ge, W., Fu, Z., Peng, R., Zhai, X. and Lu, Y. (2018a), "Core-shelled mesoporous CoFe2O4-SiO2 material with good adsorption and high-temperature magnetic recycling capabilities", J. Phys. Chem. Solids, 115, 300-306. https://doi.org/10.1016/j.jpcs.2017.12.056.
  160. Wang, J., Lu, S., Wang, Y., Li, C. and Wang, K. (2020b), "Effect analysis on thermal behavior enhancement of lithium-ion battery pack with different cooling structures", J. Energy Storage, 32, 101800. https://doi.org/10.1016/j.est.2020.101800.
  161. Wang, M., Hu, M., Hu, B., Guo, C., Song, Y., Jia, Q., He, L., Zhang, Z. and Fang, S. (2019), "Bimetallic cerium and ferric oxides nanoparticles embedded within mesoporous carbon matrix: Electrochemical immunosensor for sensitive detection of carbohydrate antigen 19-9", Biosens. Bioelectron., 135, 22-29. https://doi.org/10.1016/j.bios.2019.04.018.
  162. Wang, M., Yang, L., Hu, B., Liu, J., He, L., Jia, Q., Song, Y. and Zhang, Z. (2018b), "Bimetallic NiFe oxide structures derived from hollow NiFe Prussian blue nanobox for label-free electrochemical biosensing adenosine triphosphate", Biosens. Bioelectron.,113, 16-24. https://doi.org/10.1016/j.bios.2019.04.018.
  163. Wang, P., Yao, T., Li, Z., Wei, W., Xie, Q., Duan, W. and Han, H. (2020c), "A superhydrophobic/electrothermal synergistically anti-icing strategy based on graphene composite", Compos. Sci. Technol., 198, 108307. https://doi.org/10.1016/j.compscitech.2020.108307.
  164. Wang, P., Zhang, X., Duan, W., Teng, W., Liu, Y. and Xie, Q. (2020g), "Superhydrophobic flexible supercapacitors formed by integrating hydrogel with functional carbon nanomaterials", Chinese J. Chem., 2020, 1-12.
  165. Wang, Q., Liu, B. and Wang, Z. (2020d), "Investigation of heat transfer mechanisms among particles in horizontal rotary retorts", Powder Technol., 367, 82-96. https://doi.org/10.1016/j.powtec.2020.03.042.
  166. Wang, X.F., Gao, P., Liu, Y.F., Li, H.F. and Lu, F. (2020e), "Predicting thermophilic proteins by machine learning", Current Bioinform., 15(5), 493-502. https://doi.org/10.2174/1574893615666200207094357.
  167. Wang, X.P., Li, Z.C., Sun, T.C., Kou, J. and Li, X.H. (2020), "Factor analysis on the purity of magnesium titanate directly prepared from seashore titanomagnetite concentrate through direct reduction", Int. J. Miner., Metal. Mater., 27(11), 1462-1470. https://doi.org/10.1007/s12613-020-1990-7.
  168. Wang, Y., Yao, M., Ma, R., Yuan, Q., Yang, D., Cui, B., Ma, C., Liu, M. and Hu, D. (2020f), "Design strategy of barium titanate/polyvinylidene fluoride-based nanocomposite films for high energy storage", J. Mater. Chem. A, 8(3), 884-917. https://doi.org/10.1039/c9ta11527g
  169. Wei, Z., Chen, W., Wang, Z., Li, N., Zhang, P., Zhang, M., Zhao, L. and Qiang, Q. (2020), "High-temperature persistent luminescence and visual dual-emitting optical temperature sensing in self-activated CaNb2O6: Tb3+ phosphor", J. Am. Ceramic Soc., 104(4), 1750-1759. https://doi.org/10.1111/jace.17579.
  170. Wu, C., Wang, X., Chen, M. and Kim, M.J. (2019), "Differential received signal strength based RFID positioning for construction equipment tracking", Adv. Eng. Inf., 42, 100960. https://doi.org/10.1016/j.aei.2019.100960.
  171. Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2020), "Critical review of data-driven decision-making in bridge operation and maintenance", Struct. Infrastruct. Eng., 2020, 1-24. https://doi.org/10.1080/15732479.2020.1833946.
  172. Wu, C., Wu, P., Wang, J., Jiang, R., Chen, M. and Wang, X. (2021), "Ontological knowledge base for concrete bridge rehabilitation project management", Auto. Constr., 121, 103428. https://doi.org/10.1016/j.autcon.2020.103428.
  173. Xu, L., Jiang, S. and Zou, Q. (2020a), "An in silico approach to identification, categorization and prediction of nucleic acid binding proteins", Brief. Bioinform., 2020, 1-13.
  174. Xu, P., Lu, W., Zhang, J. and Zhang, L. (2020b), "Efficient hydrolysis of ammonia borane for hydrogen evolution catalyzed by plasmonic Ag@ Pd core-shell nanocubes", ACS Sustain. Chem. Eng., 8(33), 12366-12377. https://doi.org/10.1021/acssuschemeng.0c02276.
  175. Xu, S., Wang, J., Shou, W., Ngo, T., Sadick, A.M. and Wang, X. (2020c), "Computer vision techniques in construction: A critical review", Arch. Comput. Methods Eng., 2020, 1-15. https://doi.org/10.1007/s11831-020-09504-3.
  176. Yang, J., Li, S., Wang, Z., Dong, H., Wang, J. and Tang, S. (2020a), "Using deep learning to detect defects in manufacturing: A comprehensive survey and current challenges", Materials, 13(24), 5755. https://doi.org/10.3390/ma13245755.
  177. Yang, W., Zhao, Y., Wang, D., Wu, H., Lin, A. and He, L. (2020b), "Using principal components analysis and IDW interpolation to determine spatial and temporal changes of surface water quality of Xin'anjiang river in Huangshan, China", Int. J. Environ. Res. Public Health, 17(8), 2942. https://doi.org/10.3390/ijerph17082942.
  178. Yang, Y., Liu, J., Yao, J., Kou, J., Li, Z., Wu, T., Zhang, K., Zhang, L. and Sun, H. (2020c), "Adsorption behaviors of shale oil in kerogen slit by molecular simulation", Chem. Eng. J., 387, 124054. https://doi.org/10.1016/j.cej.2020.124054.
  179. Yang, Y., Yao, J., Wang, C., Gao, Y., Zhang, Q., An, S. and Song, W. (2015), "New pore space characterization method of shale matrix formation by considering organic and inorganic pores", J. Natural Gas Sci. Eng., 27, 496-503. https://doi.org/10.1016/j.jngse.2015.08.017.
  180. Yazdani, M., Kabirifar, K., Frimpong, B.E., Shariati, M., Mirmozaffari, M. and Boskabadi, A. (2020), "Improving construction and demolition waste collection service in an urban area using a simheuristic approach: A case study in Sydney, Australia", J. Clean. Prod., 280, 124138. https://doi.org/10.1016/j.jclepro.2020.124138.
  181. Yu, H., Yang, M., Qian, G., Cai, J., Zhou, H. and Fu, X. (2020a), "Gradation segregation characteristic and its impact on performance of asphalt mixture", J. Mater. Civ. Eng., 33(3), 04020478. https://doi.org/10.1016/j.jngse.2015.08.017.
  182. Yu, H., Zhu, X., Qian, G., Gong, X. and Nie, X. (2020b), "Evaluation of phosphorus slag (PS) content and particle size on the performance modification effect of asphalt", Constr. Build. Mater., 256, 119334. https://doi.org/10.1016/j.conbuildmat.2020.119334.
  183. Zhang, C. and Mousavi, A.A. (2020), "Blast loads induced responses of RC structural members: State-of-the-art review", Compos. Part B Eng., 2020, 108066. https://doi.org/10.1016/j.compositesb.2020.108066.
  184. Zhang, C. and Wang, H. (2019a), "Robustness of the active rotary inertia driver system for structural swing vibration control subjected to multi-type hazard excitations", Appl. Sci., 9(20), 4391. https://doi.org/10.3390/app9204391.
  185. Zhang, C. and Wang, H. (2019b), "Swing vibration control of suspended structure using active rotary inertia driver system: Parametric analysis and experimental verification", Appl. Sci., 9(15), 3144. https://doi.org/10.3390/app9153144.
  186. Zhang, C. and Wang, H. (2020), "Swing vibration control of suspended structures using the active rotary inertia driver system: Theoretical modeling and experimental verification", Struct. Control Health Monit., 27(6), e2543. https://doi.org/10.1002/stc.2543.
  187. Zhang, C., Abedini, M. and Mehrmashhadi, J. (2020a), "Development of pressure-impulse models and residual capacity assessment of RC columns using high fidelity Arbitrary Lagrangian-Eulerian simulation", Eng. Struct., 224, 111219. https://doi.org/10.1016/j.engstruct.2020.111219.
  188. Zhang, C., Alam, Z., Sun, L., Su, Z. and Samali, B. (2019a), "Fibre Bragg grating sensor-based damage response monitoring of an asymmetric reinforced concrete shear wall structure subjected to progressive seismic loads", Struct. Control Health Monit., 26(3), e2307. https://doi.org/10.1002/stc.2307.
  189. Zhang, C., Gholipour, G. and Mousavi, A.A. (2019b), "Nonlinear dynamic behavior of simply-supported RC beams subjected to combined impact-blast loading", Eng. Struct., 181, 124-142. https://doi.org/10.1016/j.engstruct.2018.12.014
  190. Zhang, C., Gholipour, G. and Mousavi, A.A. (2020b), "State-of-the-art review on responses of RC structures subjected to lateral impact loads", Arch. Comput. Methods Eng., 2020, 1-31. https://doi.org/10.1007/s11831-020-09467-5.
  191. Zhang, D., Han, X., Wang, H., Yang, Q. and Yan, J. (2020c), "Experimental study on transient heat/mass transfer characteristics during static flash of aqueous NaCl solution", Int. J. Heat Mass Transfer, 152, 119543. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119543.
  192. Zhang, F., Zhou, Y., Zhang, Y., Li, D. and Huang, Z. (2020d), "Facile synthesis of sulfur@ titanium carbide Mxene as high performance cathode for lithium-sulfur batteries", Nanophotonics, 9(7), 1-12. https://doi.org/10.1515/nanoph-2019-0568.
  193. Zhang, J. and Liu, B. (2019), "A review on the recent developments of sequence-based protein feature extraction methods", Curr. Bioinform., 14(3), 190-199. https://doi.org/10.2174/1574893614666181212102749.
  194. Zhang, J., Chen, Q., Sun, J., Tian, L. and Zuo, C. (2020e), "On a universal solution to the transport-of-intensity equation", Opt. Lett., 45(13), 3649-3652. https://doi.org/10.1364/OL.391823.
  195. Zhang, J., Sun, J., Chen, Q. and Zuo, C. (2020f), "Resolution analysis in a lens-free on-chip digital holographic microscope", IEEE Trans. Comput. Imaging, 6, 697-710. https://doi.org/10.1109/TCI.2020.2964247.
  196. Zhang, R., Jiang, T., Li, F., Li, G., Chen, H. and Li, X. (2020g), "Coordinated bidding strategy of wind farms and power-to-gas facilities using a cooperative game approach", IEEE Trans. Sustain. Energy, 11(4), 2545-2555. https://doi.org/10.1109/TSTE.2020.2965521.
  197. Zhang, T., He, X., Deng, Y., Tsang, D.C., Yuan, H., Shen, J. and Zhang, S. (2020h), "Swine manure valorization for phosphorus and nitrogen recovery by catalytic-thermal hydrolysis and struvite crystallization", Sci. Total Environ., 729, 138999. https://doi.org/10.1016/j.scitotenv.2020.138999.
  198. Zhang, T., Wu, X., Fan, X., Tsang, D.C., Li, G. and Shen, Y. (2019c), "Corn waste valorization to generate activated hydrochar to recover ammonium nitrogen from compost leachate by hydrothermal assisted pretreatment", J. Environ. Manag., 236, 108-117. https://doi.org/10.1016/j.jenvman.2019.01.018.
  199. Zhang, T., Wu, X., Li, H., Tsang, D.C., Li, G. and Ren, H. (2020i), "Struvite pyrolysate cycling technology assisted by thermal hydrolysis pretreatment to recover ammonium nitrogen from composting leachate", J. Cleaner Prod., 242, 118442. https://doi.org/10.1016/j.jclepro.2019.118442.
  200. Zhang, W., Hu, Y., Liu, J., Wang, H., Wei, J., Sun, P., Wu, L. and Zheng, H. (2020j), "Progress of ethylene action mechanism and its application on plant type formation in crops", Saudi J. Biol. Sci., 27(6), 1667-1673. https://doi.org/10.1016/j.sjbs.2019.12.038.
  201. Zhang, W., Tang, Z., Yang, Y. and Wei, J. (2021), "Assessment of FRP-concrete interfacial debonding with coupled mixed-mode cohesive zone model", J. Compos. Constr., 25(2), 04021002. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001114.
  202. Zhang, Y., Xu, C., Chen, P., Nahas, Y., Prokhorenko, S. and Bellaiche, L. (2020k), "Emergence of skyrmionium in a two-dimensional CrGe (Se, Te)3 Janus monolayer", Phys. Rev. B, 102(24), 241107. https://doi.org/10.1103/PhysRevB.102.241107.
  203. Zheng, J., Zhang, C. and Li, A. (2020), "Experimental investigation on the mechanical properties of curved metallic plate dampers", Appl. Sci., 10(1), 269. https://doi.org/10.3390/app10010269.
  204. Zhong, P.F., Lin, H.M., Wang, L.W., Mo, Z.Y., Meng, X.J., Tang, H.T. and Pan, Y.M. (2020), "Electrochemically enabled synthesis of sulfide imidazopyridines via a radical cyclization cascade", Green Chem., 22(19), 6334-6339. https://doi.org/10.1039/D0GC02125C.
  205. Zhu, H., Shen, Y., Wang, Q., Chen, K., Wang, X., Zhang, G., Yang, J., Guo, Y. and Bai, R. (2017), "Highly promoted removal of Hg(ii) with magnetic CoFe2O4@SiO2 core-shell nanoparticles modified by thiol groups", RSC Adv., 7(62), 39204-39215. https://doi.org/10.1039/C7RA06163C.
  206. Zhu, J., Shi, Q., Wu, P., Sheng, Z. and Wang, X. (2018a), "Complexity analysis of prefabrication contractors' dynamic price competition in mega projects with different competition strategies", Complexity, 2018, 5928235. https://doi.org/10.1155/2018/5928235.
  207. Zhu, J., Wang, X., Chen, M., Wu, P. and Kim, M.J. (2019a), "Integration of BIM and GIS: IFC geometry transformation to shapefile using enhanced open-source approach", Auto. Constr., 106, 102859. https://doi.org/10.1016/j.autcon.2019.102859.
  208. Zhu, J., Wang, X., Wang, P., Wu, Z. and Kim, M.J. (2019b), "Integration of BIM and GIS: Geometry from IFC to shapefile using open-source technology", Auto. Constr., 102, 105-119. https://doi.org/10.1016/j.autcon.2019.02.014.
  209. Zhu, J., Wu, P., Chen, M., Kim, M.J., Wang, X. and Fang, T. (2020a), "Automatically processing IFC clipping representation for BIM and GIS integration at the process level", Appl. Sci., 10(6), 2009. https://doi.org/10.3390/app10062009.
  210. Zhu, L., Kong, L. and Zhang, C. (2020b), "Numerical study on hysteretic behaviour of horizontal-connection and energy-dissipation structures developed for prefabricated shear walls", Appl. Sci., 10(4), 1240. https://doi.org/10.3390/app10041240.
  211. Zhu, L., Zhang, C., Guan, X., Uy, B., Sun, L. and Wang, B. (2018b), "The multi-axial strength performance of composited structural BCW members subjected to shear forces", Steel Compos. Struct., Int. J., 27(1), 75-87. https://doi.org/10.12989/scs.2018.27.1.075.
  212. Zou, Q., Xing, P., Wei, L. and Liu, B. (2019), "Gene2vec: Gene subsequence embedding for prediction of mammalian N6-methyladenosine sites from mRNA", RNA, 25(2), 205-218. https://doi.org/10.1261/rna.069112.118.
  213. Zuo, C., Chen, Q., Gu, G., Feng, S., Feng, F., Li, R. and Shen, G. (2013), "High-speed three-dimensional shape measurement for dynamic scenes using bi-frequency tripolar pulse-width-modulation fringe projection", Opt. Lasers Eng., 51(8), 953-960. https://doi.org/10.1016/j.optlaseng.2013.02.012.
  214. Zuo, C., Chen, Q., Tian, L., Waller, L. and Asundi, A. (2015), "Transport of intensity phase retrieval and computational imaging for partially coherent fields: The phase space perspective", Opt. Lasers Eng., 71, 20-32. https://doi.org/10.1016/j.optlaseng.2015.03.006.
  215. Zuo, C., Sun, J., Li, J., Zhang, J., Asundi, A. and Chen, Q. (2017), "High-resolution transport-of-intensity quantitative phase microscopy with annular illumination", Sci. Rep., 7(1), 1-22. https://doi.org/10.1038/s41598-017-06837-1.