DOI QR코드

DOI QR Code

듀얼 조향구동 장치를 갖는 포크리프트 타입 무인운반차(AGV)의 개발

Development of Forklift-Type Automated Guided Vehicle(AGV) with Dual Steering Drive Unit

  • 투고 : 2021.11.16
  • 심사 : 2021.12.17
  • 발행 : 2021.12.31

초록

Automated Guided Vehicle (AGV) is commonly used in manufacturing plant, warehouse, distribution center, and terminal. AGV is self-driven vehicle used to transport material between workstations in the shop floor without the help of an operator, and AGV includes a material transfer system located on the top and driving system at the bottom to move the vehicle as desired. For navigation, AGV mostly uses lane paths, signal paths or signal beacons. Various predominant sensors are also used in the AGV. However, in the conventional AGV, there is a problem of not turning or damaging nearby objects or AGV in a narrow space. In this paper, a new driving system is proposed to move the vehicle in a narrow space. In the proposed driving system, two sets of the combined steering-drive unit are adopted to solve the above problem. A prototype of AGV with the new driving system is developed for the comparative analysis with the conventional AGV. In addition, the experimental result shows the improved performance of the new driving system in the maximum speed, braking distance and positioning precision tests.

키워드

과제정보

This study has been partially supported by a Research Fund of Ministry of Trade, Industry and Energy, Korea.

참고문헌

  1. AGV Solution, https://blog.naver.com/agvsoft.
  2. Chang, S.H., Determination of Guide Path of AGVs using Genetic Algorithm, Journal of the Society of Korea Industrial and Systems Engineering, 2003, Vol. 26, No. 4, pp. 23-30.
  3. Chen, Z.Y., Liaw, P.P., Nguyen, V.L., and Lin, P.T., Design of a High-Payload Mecanum-Wheel Ground Vehicle (MWGV), Robotic Systems and Applications, 2021, Vol. 1, No. 1, pp. 24-34. https://doi.org/10.21595/rsa.2021.22133
  4. Cho, D.W. and Lee, Y.H., Performance Evaluation of Multi-AGV using Stochastic Model in Automatic Manufacturing System, Journal of the Society of Korea Industrial and Systems Engineering, 2000, Vol. 23, No. 54, pp. 87-95.
  5. Choi, H.S., Yoo, Y.S. and Ro, I.K., Automated Guided Vehicle Routing for the Fixed_Interval Deliveries of a Flexible Manufacturing System, Journal of the Society of Korea Industrial and Systems Engineering, 2003, Vol. 26, No. 2, pp. 68-74.
  6. Choi, J.S. and Ko, N.Y., Operation Control Algorithm for an Automated Manufacturing System with Travel Time of AGV, Journal of the Society of Korea Industrial and Systems Engineering, 1997, Vol. 20, No. 43, pp. 287-297.
  7. Clark FL-13, http://clarkhome.clarkmhc.co.kr.
  8. ISO 3691-4 : 2020, Industrial Trucks - Safety Requirements and Verification - Part 4: Driverless Industrial Trucks and Their Systems.
  9. Leica AT960, https://www.hexagonmi.com.
  10. Lim, J.K. and Lee, D.H., A Study on Moving Path Generation for Autonomous Vehicle, Journal of the Society of Korea Industrial and Systems Engineering, 1998, Vol. 21, No. 45, pp. 47-56.
  11. Lim, J.K. and Lee, D.H., Collision Avoidance Method for Autonomous Vehicle, Journal of the Society of Korea Industrial and Systems Engineering, 1999, Vol. 22, No. 50, pp. 33-44.
  12. LS Standard, Fork Lift Trucks R 06013, 2009.
  13. Ohh, M.C. and Kim, J.H., An Optimal Flow Path Design and Minimum Numbers of Vehicle for AGVS, Journal of the Society of Korea Industrial and Systems Engineering, 1995, Vol. 18, No. 36, pp. 105-112.
  14. Right Angle Stacking Aisle, http://www.kmr.co.kr
  15. Song, H.J., Cho, H.H. and Kim, S.S., Magnetic Guidance Vehicle using Up-and-down Rotating Type Differential Drive Unit, Journal of the Korean Institute of Intelligent Systems, 2014, Vol. 24, No. 2, pp. 123-128. https://doi.org/10.5391/JKIIS.2014.24.2.123
  16. The Logistics Magazine, http://www.ulogistics.co.kr.
  17. Wang, T.T., Dong, R.Y., Zhang, R., and Qin, D.C., Research on Stability Design of Differential Drive Fork-Type AGV Based on PID Control, Electronics, 2020, Vol. 9, pp. 1-17. https://doi.org/10.3390/electronics9010001
  18. Woo, S.B., Jung, K.H., Kim, J.M., Park, J.J., and Kim, S.S., Velocity Control Method of AGV for Heavy Material Transport, Journal of the Korean Institute of Intelligent Systems, 2010, Vol. 20, No. 3, pp. 394-399. https://doi.org/10.5391/JKIIS.2010.20.3.394
  19. Yu, S.Y., Ye, C.L., Liu H.J., and Chen, J., Development of an Omnidirectional Automated Guided Vehicle with MY3 Wheels, Perspectives in Science, 2016, Vol. 7, pp. 364-368. https://doi.org/10.1016/j.pisc.2015.11.056