대한토목학회논문집 (KSCE Journal of Civil and Environmental Engineering Research)

  • 제41권6호
  • /
  • Pages.617-625
  • /
  • 2021
  • /
  • 1015-6348(pISSN)
  • /
  • 2799-9629(eISSN)
대한토목학회 (Korean Society of Civil Engeneers)
권호 표지
DOI QR코드

DOI QR Code

거더 연속부의 부모멘트 제어에 효과적인 PSC 연속보의 텐던 배치에 관한 연구

A Study of the Tendon Profile of a PSC Continuous Beam Able to Resist the Negative Bending Moment of Continuous Intergirders

  • 김의헌 (기술사사무소 바른구조기술)
  • 투고 : 2020.11.20
  • 심사 : 2021.08.20
  • 발행 : 2021.12.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

본 연구에서는 국내 개량형 PSC거더(Prestressed Concrete Girder)의 연속화 방식의 문제점과 연속텐던(Continuous Tendon)의 휨모멘트(Bending Moment) 특성을 분석하였다. 이 결과들을 바탕으로 본 연구에서는 거더 연속부의 부모멘트(Negative Moment) 제어에 효과적인 연속텐던 모델을 제안하였다. 이 모델은 연속텐던의 정착단을 거더 하부로 최대한 내리고, 거더 하부로 배치되는 텐던 구간을 늘려, 거더 중앙부의 긴장력 모멘트가 감소하더라도 연속지점부의 긴장력 모멘트를 증가시키는 방법이다. 이러한 연속텐던 모델은 거더 중앙부보다 연속지점부에서 대응해야 할 설계모멘트가 큰 합성 전 연속화 공법에 적합한 성능을 발휘할 수 있다.

The problems associated with the continuous method of a domestically improved prestressed concrete (PSC) girder and the bending moment of a continuous tendon were studied. Based on the results, a continuous tendon model was proposed that can resist the negative bending moment of an intergirder. This model lowers the anchorage of the continuous tendon as far as possible under the girder, and extends the tendon section arranged under the girder. This method reduces the PS's bending moment in the middle of the span, but maximizes it in the intergirder. This continuous tendon model can offer a suitable method for continuity before manufacturing a composite, which requires a higher design bending moment in the intergirder than in the middle of the span.

키워드

참고문헌

  1. American Association of State Highway and Transportation Officials (AASHTO) (2014). AASHTO LRFD Bridge design specification, AASHTO, USA, pp. 556-557.
  2. ConsPeople (2018). Patent construction method for bridges - A to Z, Construction Economy, pp. 470 (in Korean).
  3. Expressway and Transportation Research Institute (1999). A study on the continuation method of precast prestressed concrete girder bridges, Expressway and Expressway and Transportation Research Institute, pp. 193 (in Korean).
  4. Expressway and Transportation Research Institute (2002). A study on safety evaluation and retrofit of PSC I-Girder bridges, Expressway and Expressway and Transportation Research Institute, pp. 54-61 (in Korean).
  5. Han, M. Y., Kim, B. H. and Kim, S. H. (2001). "The effect of design parameter on the beam depth of ipc girder continuous bridge." Proceedings of the Korea Concrete Institute Conference, Korea Concrete Institute, pp. 125-130 (in Korean).
  6. Koo, M. S., Yon, J. H., Jung, B. S. and Kim, S. C. (2004). "The continuous prestressed precast concrete girder bridges with a reinforcement steel plate." Magazine of the Korea Concrete Institute, Vol. 16, No. 5, pp. 35-41 (in Korean).
  7. Korea Expressway Corporation (2017). Working design for construction of Pohang-Yeongdeok expressway, Korea Expressway Corporation (in Korean).
  8. Korea Expressway Corporation (2018). Working design for construction of Sejong-Anseong expressway, Korea Expressway Corporation (in Korean).
  9. Korea Expressway Corporation (2019). Working design for construction of Gwangju-Gangjin expressway, Korea Expressway Corporation (in Korean).
  10. Korea Institute of Bridge and Structural Engineers (KIBSE) (2016). Road bridge design standards, Korea Institute of Bridge and Structural Engineers, pp. 811 (in Korean).
  11. Korea Water Resources Corporation (K-Water) (2019). Preliminary design for construction of Songsan-Sihwa connection road, Korea Water Resources Corporation (in Korean).
  12. Kwak, H. G. , Seo, Y. J. , Jung, C. M. and Park, Y. H. (1999). "Control of deck cracking at interior supports of continuous PSC-Beam bridge." Journal of the Computational Structural Engineering Institute of Korea, Vol. 12, No. 2, pp. 201-214.
  13. Lee, J. H. (2015). Prestressed concrete strength design method and limit state design method, Dongmyeong-sa, pp. 858 (in Korean).