참고문헌
- J. U. Cho. (2015). Study on Convergence Technique through the Flow Analytical Study inside the Faucet for Bathroom. Journal of the Korea Convergence Society, 6(2), 37-42. DOI : 10.15207/JKCS.2015.6.2.037
- S. H. Jo, J. I. Park & K. W. Nam. (2006). Numerical Simulation in the IC Engine Lubricating Gerotor Oil Pump. The Korean Society of Mechanical Engineers, 30(10), 1019-1025. DOI : 10.3795/KSME-B.2006.30.10.1019
- J. H. Lee & J. U. Cho. (2015). Study on Convergence Technique through Flow Analysis at the Flexible Joint of the Pipe Laying. Journal of the Korea Convergence Society, 6(3), 13-18. DOI : 10.15207/JKCS.2015.6.3.013
- H. C. Lee & J. U. Cho. (2014). A Study on Air Flow Analysis due to the Shape of Automotive Body. Journal of the Korea Convergence Society, 5(2), 19-23. DOI : 10.15207/JKCS.2014.5.2.019
- S. C. Yoo. (2018). Development of the Design and Manufacturing Technologies of the Experimental Four-Valve SI Engine for In-Cylinder Air Flow Study Using the Laser Based Flow Diagnostic Techniques. Journal of the Korean Society of Mechanical Technology, 20(3), 377-382. DOI : 10.17958/ksmt.20.3.201806.377
- O. B. Suk & J. U. Cho. (2018). A Convergence Study through Flow Analysis due to the Configuration of Automotive Air Breather. Journal of the Korea Convergence Society, 9(10), 265-270. Doi : 10.15207/JKCS.2018.9.10.265
- M. H. Chung, S. M. Yang & H. Y. Lee. (2005). 3D Flow Analysis of Globe Valve with Air Operated Actuator. Korean Society for Fluid machinery, 8(4), 7-13. DOI : 10.5293/KFMA.2005.8.4.007
- J. U. Cho. (2014). A Flow Analysis on Wing Shape of Cooling Fan at Automobile. Journal of the Korea Convergence Society, 5(4), 75-79. DOI : 10.15207/jkcs.2014.5.4.075
- R. D. Gyeom & L. K. Bock. (2019). Flow Characteristics and Wind Loads on the Solar Panel and Floating System of Floating Solar Generato. Journal of the Korea Academia-Industrial cooperation Society, 20(10), 229-235. DOI : 10.5762/KAIS.2019.20.10.229
- D. W. Jeong, Y. S. Won & S. H. Kang. (2019). Comparison Study on Aerodynamic Performance and Wake Flow Field for a MW-Class Wind Turbine Model. Journal of the Korean Society of Visualization, 17(2), 32-38. DOI : 10.5407/jksv.2019.17.2.032
- S. W. Park, I. S. Choi, K. C. Noh, S. P. Ryu & K. S. Yoon. (2012). An Experimental Study on Measurement of Flow Coefficient Using the Steady-Flow Test Rig. Journal of the Korean Society of Marine Engineering, 36(4), 423-429. DOI : 10.5916/jkosme.2012.36.4.423
- C. W. Kang, C. S. Yi & C. W. Lee. (2019). Experiment and Flow Analysis of the Flow Coefficient Cv of a 1 inch Ball Valve for a Thermal Power Plant. Journal of the Korean Society of Manufacturing Process Engineers, 18(3), 109-115. DOI : 10.14775/ksmpe.2019.18.3.109
- J. Y. Cho, S. H. Go & H. G. Kim. (2017). Analysis of Drainage Efficiency of Different Type of Drainage using Computational Fluid Dynamic Method. Journal of the Korean Society of Manufacturing Process Engineers, 16(2), 34-43. DOI : 10.14775/ksmpe.2017.16.2.034
- H. K. Kim & H. M. Cho. (2014). A Study on Comparative Analysis of Internal ECV Through Flow Analysis. Journal of the Korean Society of Mechanical Technology, 16(1), 1161-1166. DOI : 10.17958/ksmt.16.1.201402.1161
- P. G. Park, E. S. Lee, E. H. Jeong & J. H. Kim, (2007). Numerical Flow Analysis of a Supersonic Impulse Turbine with Nozzles and Rotor Blades, Korean Society for Fluid machinery, 10(1), 26-33. DOI : 10.5293/KFMA.2007.10.1.02
- J. H. Ku. (2017). A Study on the Platform for Big Data Analysis of Manufacturing Process. Journal of Convergence for Information Technology, 7(5), 177-182. https://doi.org/10.22156/CS4SMB.2017.7.5.177
- S. Y. Min & S. I. Kim. (2018). Study on Improvement of tap water drinking rate of Seoul city Tap water 'Arisu' through usage and recognition analysis. Journal of Digital Convergence, 16(9), 399-404. https://doi.org/10.14400/JDC.2018.16.9.399