과제정보
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT). (Nos. 2021R1C1C2003235 and 2019R1A2C1004715)
참고문헌
- H. Maeda and Y. Yanagisawa, "Recent Developments in High-Temperature Superconducting Magnet Technology (Review)," IEEE Trans. Appl. Supercond., vol. 24, no. 3, Jun. 2014, Art. no. 4602412.
- D. W. Hazelton et al., "Recent developments in 2G HTS coil technology," IEEE Trans. Appl. Supercond., vol. 19, no. 3, pp. 2218-2222, Jun. 2009. https://doi.org/10.1109/TASC.2009.2018791
- Y. S. Choi, D. L. Kim, and S. Y. Hahn, "Progress on the development of a 5 T HTS insert magnet for GHz class NMR applications," IEEE Trans. Appl. Supercond., vol. 21, no. 3 PART 2, pp. 1644-1648, Jun. 2011. https://doi.org/10.1109/TASC.2010.2101035
- S. Lee et al., "Persistent Current Mode Operation of A 2G HTS Coil with A Flux Pump," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Jun. 2016, Art. no. 0606104.
- Chris W Bumby et al., "Development of a brushless HTS exciter for a 10kW HTS synchronous generator," Supercond. Sci. Technol., vol. 29, no. 2, 2016, Art. no 024008.
- H. Jeon et al., "PID Control of an Electromagnet-Based Rotary HTS Flux Pump for Maintaining Constant Field in HTS Synchronous Motors," IEEE Trans. Appl. Supercond., vol. 28, no. 4, Jun. 2018, Art. no. 5207605.
- S. Han et al., "Degradation of critical current in an HTS coated conductor considering curvature of ellipse for rotating flux pump," Adv. Cryogenic Engr., vol. 89, pp. 141-146, Jan 2018.
- S. B. Kim, A. Saitou, J. H. Joo, and T. Kadota, "The normal-zone propagation properties of the non-insulated HTS coil in cryocooled operation," Phys. C Supercond. its Appl., vol. 471, no. 21-22, pp. 1428-1431, 2011. https://doi.org/10.1016/j.physc.2011.05.209
- S. B. Kim et al., "The characteristics of the normal-zone propagation of the HTS coils with inserted Cu tape instead of electrical insulation," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Jun. 2012, Art. no. 4701504.
- D. Colangelo and B. Dutoit, "Impact of the normal zone propagation velocity of high-temperature superconducting coated conductors on resistive fault current limiters," IEEE Trans. Appl. Supercond., vol. 25, no. 2, Apr. 2015, Art. no. 5601708.
- C. Lacroix and F. Sirois, "Corrigendum: Concept of a current flow diverter for accelerating the normal zone propagation velocity in 2G HTS coated" Supercond. Sci. Technol., vol. 27, no. 12, 2014, Art. no. 035003.
- S. B. Kim et al., "The study on improving the self-protection ability of HTS coils by removing the insulation and lamination of the various metal tapes," Phys. C Supercond. its Appl., vol. 484, pp. 310-315, 2013. https://doi.org/10.1016/j.physc.2012.03.064
- Y. Iwasa, Case Studies in Superconducting Magnets: Design and Operational Issues, 2nd ed. New York, NY, USA: Springer-Verlag, 2009, pp. 496-505.
- Y. Iwasa et al., "Stability and quench protection of coated YBCO 'composite' tape," IEEE Trans. Appl. Supercond., vol. 15, no. 2, pp. 1683-1686, Jun. 2005. https://doi.org/10.1109/TASC.2005.849238
- S. Hahn et al., "A 78-mm/7-T multi-width no-insulation ReBCO magnet: Key concept and magnet design," IEEE Trans. Appl. Supercond., vol. 24, no. 3, Jun. 2014, Art. no. 4602705.
- W. Yao, J. Bascunan, S. Hahn, and Y. Iwasa, "MgB2 coils for MRI applications," IEEE Trans. Appl. Supercond., vol. 20, no. 3, pp. 756-759, Jun. 2010. https://doi.org/10.1109/TASC.2010.2044035
- J. H. Kim et al., "Effects of stabilizer thickness of 2G HTS wire on the design of a 1.5-MW-class HTS synchronous machine," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Jun. 2016, Art. no. 5206705.
- S. Hahn, D. K. Park, J. Bascunan, and Y. Iwasa, "HTS pancake coils without turn-to-turn insulation," IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1592-1595, Jun. 2011. https://doi.org/10.1109/TASC.2010.2093492
- Y. G. Kim, S. Hahn, K. L. Kim, O. J. Kwon, and H. G. Lee, "Investigation of HTS racetrack coil without turn-to-turn insulation for superconducting rotating machines," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Jun. 2012, Art. no. 5200604.
- H. J. Shin et al., "A study on cooling performances and over-current behaviors of GdBCO coils with respect to epoxy impregnation method," IEEE Trans. Appl. Supercond., vol. 25, no. 3, Jun. 2015, Art. no. 4602105.
- S. Hahn et al., "No-insulation coil under time-varying condition: Magnetic coupling with external coil," IEEE Trans. Appl. Supercond., vol. 23, no. 3, Jun. 2013, Art. no. 4601705.
- Y. H. Choi, S. G. Kim, S. H. Jeong, J. H. Kim, H. M. Kim, and H. Lee, "A Study on Charge-Discharge Characteristics of No-Insulation GdBCO Magnets Energized via a Flux Injector," IEEE Trans. Appl. Supercond., vol. 27, no. 4, Jun. 2017, Art. no. 4601206.
- K. L. Kim et al., "Analytical and empirical studies on the characteristic resistances of no-insulation GdBCO racetrack pancake coil under various operating currents," Curr. Appl. Phys., vol. 15, no. 1, pp. 8-13, Jan. 2015. https://doi.org/10.1016/j.cap.2014.10.029
- Y. H. Choi et al., "Thermal quench behaviors of no-insulation coils wound using GdBCO coated conductor tapes with various lamination materials," IEEE Trans. Appl. Supercond., vol. 24, no. 3, Jun. 2014, Art. no. 8800105.
- H. Song, K. Gagnon, and J. Schwartz, "Quench behavior of conduction-cooled y Ba2Cu3O 7-δ coated conductor pancake coils stabilized with brass or copper," Supercond. Sci. Technol., vol. 23, no. 6, 2010, Art. no. 065021.
- L. A. Angurel et al., "Quench detection in YBa2 Cu3 O7-δ coated conductors using interferometric techniques," J. Appl. Phys., vol. 104, no. 9, Nov. 2008, Art. no. 093916.
- S. Liu, L. Ren, J. Li, and Y. Tang, "Analysis of quench propagation characteristics of the YBCO coated conductor," Phys. C Supercond. its Appl., vol. 471, no. 21-22, pp. 1080-1082, 2011. https://doi.org/10.1016/j.physc.2011.05.128
- H. Y. Park et al., "Analysis of temperature dependent quench characteristics of the YBCO coated conductor," IEEE Trans. Appl. Supercond., vol. 20, no. 3, pp. 2122-2125, Jun. 2010. https://doi.org/10.1109/TASC.2010.2041770
- D. Uglietti and C. Marinucci, "Design of a quench protection system for a coated conductor insert coil," IEEE Trans. Appl. Supercond., vol. 22, no. 3, Jun. 2012, Art. no. 4702704.
- H. Jeon et al., "Methods for Increasing the Saturation Current and Charging Speed of a Rotary HTS Flux-Pump to Charge the Field Coil of a Synchronous Motor," IEEE Trans. Appl. Supercond., vol. 28, no. 3, Apr. 2018, Art. no. 5202605.
- H. Jeon et al., "PID Control of an Electromagnet-Based Rotary HTS Flux Pump for Maintaining Constant Field in HTS Synchronous Motors," IEEE Trans. Appl. Supercond., vol. 28, no. 4, Jun. 2018, Art. no. 5207605.
- C. Hoffmann, D. Pooke, and A. D. Caplin, "Flux pump for HTS magnets," IEEE Trans. Appl. Supercond., vol. 21, no. 3, pp. 1628-1631, Jun. 2011. https://doi.org/10.1109/TASC.2010.2093115
- A. E. Pantoja, Z. Jiang, R. A. Badcock, and C. W. Bumby, "Impact of Stator Wire Width on Output of a Dynamo-Type HTS Flux Pump," IEEE Trans. Appl. Supercond., vol. 26, no. 8, Dec. 2016, Art. no. 4805208.
- Z. Jiang, C. W. Bumby, R. A. Badcock, H. J. Sung, and R. A. Slade, "A novel rotating HTS flux pump incorporating a ferromagnetic circuit," IEEE Trans. Appl. Supercond., vol. 26, no. 2, Mar. 2016, Art. no. 4900706.
- S. Lee et al., "Persistent Current Mode Operation of A 2G HTS Coil with A Flux Pump," IEEE Trans. Appl. Supercond., vol. 26, no. 4, Jun. 2016, Art. no. 0606104.
- S. Han et al., "Charging Characteristics of Rotary HTS Flux Pump with Several Superconducting Wires," IEEE Trans. Appl. Supercond., vol. 29, no. 5, Aug. 2019, Art. no. 0603605.
- H. Jeon et al., "Methods for increasing the saturation current and charging speed of a rotary HTS flux-pump to charge the field coil of a synchronous motor," IEEE Trans. Appl. Supercond., vol. 28, no. 3, Apr. 2018, Art. no. 5202605.
- C. W. Bumby, Z. Jiang, J. G. Storey, A. E. Pantoja, and R. Badcock, "Anomalous open-circuit voltage from a high-Tc superconducting dynamo," Appl. Phys. Lett., vol. 108, 2016, Art. no. 122601.
- Z Jiang, C. W. Bumby, R. A. Badcock, H.-J. Sung, N. J. Long, and N. Amemiya, "Impact of flux gap upon dynamic resistance of a rotating HTS flux pump," Supercond. Sci. Technol., vol. 28, no. 11, Sep. 2015, Art. no. 115008.
- J. Geng et al., "Origin of dc voltage in type II superconducting flux pumps: Field, field rate of change, and current density dependence of resistivity," J. Phys. D, Appl. Phys., vol. 49, no. 11, 2016, Art. no. 11LT01.
- Z. Jiang, K. Hamilton, N. Amemiya, R. A. Badcock, and C. W. Bumby, "Dynamic resistance of a high-Tc superconducting flux pump," Appl. Phys. Lett., vol. 105, 2014, Art. no. 112601.
- J. H. Kim et al., "Fabrication and performance testing of a 1-kW-high-temperature superconducting generator with a high-temperature superconducting contactless field exciter," Supercond. Sci. Technol., vol. 33, Jul. 2020, Art. no. 095003.