DOI QR코드

DOI QR Code

A simplified method for free vibration analysis of wall-frames considering soil structure interaction

  • Kara, Dondu (Department of Civil Engineering, Engineering Faculty, Kirklareli University) ;
  • Bozdogan, Kanat Burak (Department of Civil Engineering, Canakkale Onsekiz Mart University) ;
  • Keskin, Erdinc (Department of Civil Engineering, Engineering Faculty, Kirklareli University)
  • 투고 : 2019.06.19
  • 심사 : 2020.08.21
  • 발행 : 2021.01.10

초록

In this study, a method for free vibration analysis of wall-frame systems built on weak soil is proposed. In the development of the method, the wall-frame system that constitutes the superstructure was modeled as flexural-shear beam. In the study, it is accepted that the soil layers are isotropic, homogeneous and elastic, and the waves are only vertical propagating shear waves. Based on this assumption, the soil layer below is modeled as an equivalent shear beam. Then the differential equation system that represented the behavior of the whole system was written for both regions in a separate way. Natural periods were obtained by solving the differential equations by employing boundary conditions. At the end of the study, two examples were solved and the suitability of the proposed method to the Finite Element Method was evaluated.

키워드

참고문헌

  1. Baikov, V. and Sigalov, E. (1978), Reinforced Concrete Structures, Moscow, Mir Publishers.
  2. Basu, A., Nagpal, A.K. and Kaul, S. (1984), "Charts for seismic design of frame-wall systems", J. Struct. Eng. -ASCE, 110(1), 31-46. https://doi.org/10.1061/(ASCE)0733-9445(1984)110:1(31).
  3. Bozdogan, K.B. (2011), "The effect of foundation elasticity on dynamic behaviour of buildings", Gradevinar, 63(4),335-340. (in Croatian).
  4. Bozdogan, K.B. (2013), "Free vibration analysis of asymmetric shear wall-frame buildings using modified finite element-transfer matrix method", Struct. Eng. Mech., 46(1), 1-18. https://doi.org/10.12989/sem.2013.46.1.001.
  5. Carpinteri, A., Lacidogna, G. and Cammarano, S. (2013), "Structural analysis of high- rise buildings under horizontal loads:A study on the intesa Sanpaolo tower in turin", Eng. Struct., 56, 1362-1371. https://doi.org/10.1016/j.engstruct.2013.07.009.
  6. Chitty L., (1947), "On the cantilever composed of a number of parallel beams interconnected by cross bars", Philosophical Magazine, London, Series, 7(38), 685-699. https://doi.org/10.1080/14786444708521646.
  7. D'annibale, F., Feretti M. and Luongo A. (2019), "Shear-shear-torsional homogenous beam models for nonlinear periodic beam-like structures", Eng. Struct., 184, 115-133. https://doi.org/10.1016/j.engstruct.2019.01.039.
  8. Di, B., Fu, X. (2017), "Seismic behavior of shear wall-frame systems considering foundation stiffness", Int J Struct Stab Dy, 17(3),1-39. https://doi.org/10.1142/S0219455417500419.
  9. Dobry, R., Oweis, I .and Urzua, A. (1976), "Simplified procedures for estimating the fundamental period of a soil profile", Bull. Seismol. Soc. Am., 66(4), 1293-1321.
  10. Dym, C.L. and Williams, H.E. (2007), "Estimating fundamental frequencies of tall buildings", J Struct. Eng. ASCE, 133(10), 1479-1483. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:10(1479)
  11. Ertutar, Y. and Arisoy B. (1994), "Computation of the shear stiffness for the combined shear wall with multi span systems", J. Hous. Sci., 118, 105-112.
  12. Faridani ,H. M. and Capsoni, A. (2016), "A modified replacement beam for analyzing building structures with damping systems", Struct.Eng, Mech., 58(5), 905-929. https://doi.org/10.12989/sem.2016.58.5.905.
  13. Georgoussis, G. K. (2007), "Approximate analysis of symmetrical structures consisting of different types of bents", Struct. Des. Tall Special Build., 16(3), 231-247. https://doi.org/10.1002/tal.312.
  14. Hoenderkamp D. C. J. (2002), "A Simplified Analysis of High-Rise Structures with Cores", Struct. Des. Tall Build., 11(2), 93-107. https://doi.org/10.1002/tal.192.
  15. Jahanshahi, M. R. and Rahgozar, R. (2012), "Free vibration analysis of combined sytem with variable cross section in tall buildings", Struct. Eng. Mech., 42(4), 715-728. https://doi.org/10.12989/sem.2012.42.5.715.
  16. Kazaz, I. and Gulkan, P. (2012), "An improved frame-shear wall model:continuum approach", Struct. Des. Tall Special Build., 21(7), 524-542. https://doi.org/10.1002/tal.626.
  17. Kiefer, A., Leger, P. (1999), "Semi-continuum seismic analysis of soil-building systems", Eng. Struct., 21(4), 332-340. https://doi.org/10.1016/S0141-0296(97)00180-6.
  18. Lacidogna, G. (2017), "Tall buildings: Secondary effects on the structural behaviour", P I Civil Eng-Str B., 170(6), 391-405. https://doi.org/10.1680/jstbu.16.00058.
  19. Laier, J. E. (2008), "An improved continuous medium technique for structural frame analysis", Struct. Des. Tall Special Build., 17(1), 25-38. https://doi.org/10.1002/tal.309.
  20. Mancini, E. and Savassi, W. (1999), "Tall buildings structures unified plane panels behavior", Struct. Des. Tall Build. 8(2), 155-170.https://doi.org/10.1002/(SICI)1099-1794(199906)8:2<155::AID-TAL125>3.0.CO;2-6.
  21. Meftah, S. A., Tounsi, A. and El Abbas, A.B. (2007), "A simplified approach for seismic calculation of a tall building braced by shear walls and thin-walled open section structures", Eng. Struct., 29(10), 2576-2585. https://doi.org/10.1016/j.engstruct.2006.12.014.
  22. Miranda, E. and Reyes, J. C. (2002), "Approximate lateral drift demands in multi-story buildings with nonuniform stiffness", J Struct. Eng. ASCE, 128(7), 840-849. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:7(840).
  23. Murashev, V., Sigalov, E., and Baikov, V. N., (1962), Reinforced Concrete Structures-General Course, State Publishing House, Moscow, Russia.
  24. Nitti G., Lacidogna, G., Carpinteri, A. (2019), "Structural analysis of high-rise buildings under horizontal loads: A study on the piedmont region headquarters tower in turin", Open Construct Build Tech J, 13, 81-96. 10.2174/1874836801913010081.
  25. Ng, S. C. and Kuang JS. (2000), "Triply coupled vibration of asymmetric wall-frame structures", J. Struct. Eng. ASCE, 128(7), 840-849. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:8(982).
  26. Ozturk, D. and Bozdogan, K.B. (2017), "A Method for determination of the fundamental period of layered soil profiles", J. Appl. Comput. Mech., 3(4), 267-273. 10.22055/JACM.2017.21810.1116.
  27. Piccardo, G., Tubino, F. and Luongo, A. (2019), "Equivalent Timoshenko linear beam model for the static and dynamic analysis of tower buildings", Appl Math Model, 71, 77-95. https://doi.org/10.1016/j.apm.2019.02.005.
  28. Rafezy, B. and Howson, WP. (2008), "Vibration analysis of doubly asymmetric, three dimensional structures comprising wall and frame assemblies with variable cross section", J. Sound Vib., 318(1-2), 247-266. https://doi.org/10.1016/j.jsv.2008.04.018.
  29. Rahgozar, R., Ahmadi, A. and Sharifi, Y. (2010), "A simple mathematical model for approximate analysis of tall buildings", J. App. Math. Modelling, 34, 2437-2451. https://doi.org/10.1016/j.apm.2009.11.009.
  30. Rodriguez, A. A. and Miranda, E. (2016), "Dynamic behavior of buildings with non-uniform stiffness along their height assessed through coupled flexural and shear beams", Bul. Earthquake Eng., 14(12), 3463-3483. https://doi.org/10.1007/s10518-016-0009-2.
  31. Rosman, R. (1964), "Approximate analysis of shear walls subject to lateral loads", Proc. Am. Concr. Inst., 61(6), 717-734.
  32. Rutenberg, A. and Heidebrecht A.C. (1975), "Approximate analysis of asymmetric wall-frame structures", Building Science, 10(1), 731-745. https://doi.org/10.1016/0007-3628(75)90005-5.
  33. Savassi, W. and Mancini, E. (2009), "One-dimensional finite element solution for non-uniform tall building structures and loading", Struct. Des. Tall Build., 18(4), 441-453. https://doi.org/10.1002/tal.445.
  34. Sgambi, L. (2020), "Multi-Beams modelling for high-rise buildings subjected to static horizontal loads", Struct. Eng. Mech. 75(3), 283-294. https://doi.org/10.12989/sem.2020.75.3.283.
  35. Smith, B. S. and Yoon, Y. S. (1991), "Estimating seismic base shears of tall wall-frame buildings", J. Struct. Eng.-ASCE 117(10), 3026-3041. https://doi.org/10.1061/(ASCE)0733-9445(1991)117:10(3026).
  36. Son, H. J., Park, J., Kim, H., Lee, H. Y. and Kim, D.J. (2017), "Generalized finite element analysis of high-rise wall-frame structural systems", Eng Computation 34(1), 189-210. https://doi.org/10.1108/EC-12-2018-0568.
  37. Stafford Smith, B. and Crowe, E. (1986), "Estimating periods of vibration of tall building". J Struct Div. ASCE, 1005-1019. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:5(1005).
  38. Swaddiwudhipong S., Lee, L.S. and Zhou, Q. (2001), "Effect of the Axial Deformation on Vibration of Tall Buildings", Struct. Des. Tall Build, 10(2), 79-91. https://doi.org/10.1002/tal.175.
  39. Takabatake, H. (2010), "Two-dimensional rod theory for approximate analysis of building structures", Earth. Struct., 1(1), 1-19. https://doi.org/10.12989/eas.2010.1.1.001.
  40. Tarjan, G. and Kollar, P. L. (2004), "Approximate analysis of building structures with identical stories subjected to earthquakes", Int. J. Solids Struct. 41(5-6), 1411-1433. https://doi.org/10.1016/j.ijsolstr.2003.10.021.
  41. Toutanji, A. H. (1997)," The effect of foundation flexibility on the interaction between shear walls and frames", Eng. Struct., 19(2), 1036-1042. https://doi.org/10.1016/S0141-0296(97)00046-1.
  42. Xia, G., Shu, W. and Stanciulescu, I. (2019), "Efficient analysis of shear wall-frame structural systems", Eng Comp., Early View, https://doi.org/10.1108/EC-12-2018-0568.
  43. Wang Y., Arnaouti, C. and Guo, S. (2000), "A Simple approximate formulation for the first two frequencies of asymmetric wall-frame multi-storey building structures", J. Sound and Vib., 236(1), 141-160. https://doi.org/10.1006/jsvi.2000.2984.
  44. Wdowicki, J. and Wdowicka, E. (2012), "Analysis of shear wall structures of variable cross section", Struct. Des. Tall Special. Build., 21(1), 1-15. https://doi.org/10.1002/tal.581.
  45. Zalka, K. A. (2001), "A simplified method for calculation of natural frequencies of wall-frame buildings", Eng. Struct., 23(12), 1544-1555. https://doi.org/10.1016/S0141-0296(01)00053-0.
  46. Zalka, K. A. (2014), "Maximum deflection of asymmetric wall-frame buildings under horizontal load", Per. Poly. Civ. Eng., 58(4), 1-10. https://doi.org/10.3311/PPci.7084.