Textile Science and Engineering (한국섬유공학회지)

The Korean Fiber Society (한국섬유공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of a Heart-rate Band Based on Screen Printing Using Lilypad Arduino

릴리패드 아두이노를 이용한 스크린 프린팅 기반의 심박수 밴드 개발

  • Kim, Hee Jin (Department of Clothing and Textiles, Gyeongsang National University) ;
  • Lim, Dae Young (Material and Component Convergence R&D Department, Korea Institute of Industrial Technology) ;
  • Lee, Sohee (Department of Clothing and Textiles, Gyeongsang National University)
  • 김희진 (경상국립대학교 의류학과) ;
  • 임대영 (한국생산기술연구원 소재부품융합연구부문) ;
  • 이소희 (경상국립대학교 의류학과)
  • Received : 2021.12.01
  • Accepted : 2021.12.25
  • Published : 2021.12.31
⟨ Previous Next ⟩

Abstract

Much research has been carried out to combine textiles and electronic products. However, most of the studies use conductive metal yarn, and the resultant fabric is not flexible enough to use as clothing. In addition, the circuits that connect textiles to electronics are not flexible. Therefore, the aim of this study was to induce conductivity in textiles using screen printing to directly print conductive ink on substrates and then develop a heart rate measurement band using them. To accomplish this, the printing conditions were first optimized by the amount of ink and amount of printing to increase conductivity. Then, the circuit was designed to be operated via a Lilypad Arduino and printed using screen printing. Finally, a heart-rate band that can be visually identified by an LED blinking according to the heart rate was created.

Keywords

Acknowledgement

본 논문은 한국생산기술연구원 기관주요사업과 경기도기술 개발사업 "지능형 전자섬유 기반 스마트 텍스트로닉스 개발(kitech JA-21-0001/kitech IZ-21-0001)"의 지원 및 2021년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업입니다(No. NRF - 2021R1I1A3057957).

References

  1. E. J. Park and D. Y. Park, "Development of Wearable Physical Activity Monitoring System", J. Korea Institude of Information, Electronics, and Communication Technology, 2018, 11, 34-39.
  2. B. S. Seo, T. K. Kim, and J. H. Kim, "Distributed ECG Monitoring System based on Wireless Sensor Network", Korean Institute of Information Scientists and Engineers, 2007, 1, 57-61.
  3. E. J. Lee, H. B. Kim, J. W. Choi, and Y. J. Lee, "School Uniforms Reforming Project for Safe Homecoming at Night", The Korean Society of Computer and Information, 2014, 22, 223-226.
  4. https://www.donga.com/news/article/all/20210314/105873405/1.html (Accessed December 14, 2021).
  5. S. K. Park and W. K. Kim, "Electronic and Smart Textiles", Polym. Sci. Technol., 2013, 24, 38-44.
  6. H. J. Kim, J. Seo, and Y. Kim, "The Effect of Scratch Programming Education Using Arduino on Middle School Students Creative Problem Solving Ability", Korean Association for Learner-Centered Curriculum and Instruction, 2016, 16, 707-724.
  7. J. Ko and J. Shim, "A Comparison of the Construction for IoT System in Smart Clothing," J. Multimedia and Information System, 2015, 2, 327-332. https://doi.org/10.9717/JMIS.2015.2.4.327
  8. J. Kwon, Y. S. Lee, S. H. Lee, Y. M. Kim, and H. R. Woo, "A Study on Development of Riding-wear with Direction Indication by Using Arduino", J. Korean Society of Costume, 2019, 96, 57-75.
  9. K. H. Son, "The Development and Application to Computer Programming Education Using Arduino", Master's Thesis, Gyeongin National University of Education, Incheon, 2013.
  10. J. Ko, "Smart Safety Hat for Elderly Pedestrians", J. Korea Multimedia Society, 2017, 20, 1387-1394. https://doi.org/10.9717/KMMS.2017.20.8.1387
  11. B. Jeon, S. Park, J. Cho, B. C. Bae, and J. D. Cho, "Smart Maternity Wear (Lily Kickee): A Wearable Device Sensing and Visualizing Fetal Movements", Proceedings of HCI Korea (HCIK '15), Hanbit Media, Inc., Seoul, KOR, 2014.
  12. H. Park, "Sewing Methods of the Conductive Yarns for the Electric Cables of Bio-shirts", Korean J. Human Ecology, 2006, 15, 317-325.
  13. T. Wojcik, U.S. Patent, 4,981,074 (1990).
  14. Q. Li, Z. Ran, X. Ding, and X. Wang, "Fabric Circuit Board Connecting to Flexible Sensors or Rigid Components for Wearable Applications", Key Laboratory of Textile Science & Technology, 2019, 19, 3745.
  15. J. S. Yang and J. Y. Kim, "A Case Study on the Fashion Wearable Device Development", J. Korean Society Design Culture, 2015, 21, 363-376.
  16. M. Abshirini, M. Charara, Y. Liu, M. Saha, and M. C. Altan, "3D Printing of Highly Stretchable Strain Sensors Based on Carbon Nanotube Nanocomposites", Carbon Nanotube Nanocomposites, 2018, 20, 1800425.
  17. S. K. Lee, "A Study on the Development and Characteristics of Flexible Resistance Sensor for Dissimilar Material FDM 3D Printing", J. Rehabilitation Welfare Engineeering & Assistive Technology, 2018, 12, 26-27.
  18. L. Kolodziej, S. Ostrowski, A. Maciejewski, and M. Jakubowska, "The Influence of Screen-Printing Parameters on Properties of Conductive Layers for Application in Biomedical Electrodes", International Conference Mechatronics, 2019, 1044, 406-413.
  19. P. He, J. Cao, H. Ding, C. Liu, J. Neilson, Z. Li, L. A. Kinloch, and B. Derby, "Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics", ACS Appl. Mater. Interfaces, 2019, 11, 32225-32234. https://doi.org/10.1021/acsami.9b04589