Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Real-time Flatness Measurement System of COF Film using Pneumatic Pressure

공압을 이용한 COF 필름의 실시간 위치 평탄도 측정 시스템 개발

  • Received : 2020.11.11
  • Accepted : 2020.12.15
  • Published : 2021.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In this paper, an inspection system has been developed where pneumatic instruments are used to stretch the film using compressed air, thus the curl problem can be overcome. When the pneumatic system is applied, a line scan camera should be used instead of an area camera because the COF surface makes an arc by the air pressure. The distance between the COF and the inspection camera should be kept constant to get a clear image, thus the position of COF is to be monitored on real-time. An operating software has been also developed which is switching on/off the pneumatic system, determining the COF position using a camera vision, displaying the contour of the COF side view, sending self-diagnosis result and etc. The developed system has been examined using the actual roll of COF, which convince that the system can be an effective device to inspect the COF rolls in process.

Keywords

Acknowledgement

이 논문은 2020년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원(KIAT)의 지원을 받아 수행된 연구임.(N0002429, 2020년 산업전문인력역량강화 사업).

References

  1. Ryu, J. R., "Development of Automatic Fault Detection System for Chip-On-Film", Journal of Advanced Information Technology and Convergence Vol. 9, No. 1, pp. 313-318, 2011.
  2. Lee S. W., Choi, D. J., Lee, D. J., Chun, M, G., "Development of Real-Time TCP/COF Inspection System using Differential Image," Journal of Korean Institute of Intelligent Systems, Vol. 19, No. 2, pp. 336-341, 2009.
  3. Kim, Y. S., Moon, H. J., Song, C. K., Jeon, M. K., "Defects detection of TCP/COF using real-time line-scanner", CICS 2007 Oct 26, pp. 153-154, 2007.
  4. Zhang, H. X., Kweon, H. K., "A Study on the Circular Hole Diameter Measurement System by using Machine Vision", KSMPE Spring, pp. 173-173, 2016.
  5. Park, C. H., Choi, J. H., "An Automatic Inspection System for Binary Patterned Objects by Using A Computer Vision System", Journal of the Korean Institute of Plant Engineering, Vol. 8, No. 2, pp. 41-52, 2003.
  6. Sid-Ahmed, M. A., Image Processing Theory, Algorithm, and Architectures, McGraw-Hill. Inc. pp. 57-98, 1994.
  7. Parker, J. R., Algorithms for image processing and computer vision, john wiley & Son, pp. 150-219, 1997.