DOI QR코드

DOI QR Code

An Analytical Study on the Heat Transfer Characteristics of MF Evaporation Tubes Attached with a Fin

핀이 부착된 MF증발관의 열전달 특성에 대한 해석적 연구

  • Received : 2020.04.06
  • Accepted : 2020.08.30
  • Published : 2021.01.31

Abstract

In this study, the heat transfer process around the finned channel tubes is numerically examined. Serially arranged tubes of an evaporator were used for heat exchange. The numerical analysis results confirmed that the vortex generated at the rear of the channel pipe was caused by the fin. Furthermore, it was also confirmed that the temperature difference was large between the inlet and outlet ends of the fin. The temperature of the location where the fin was attached to the channel pipe was found to be close to the surface temperature of the channel wall. However, the temperature rose rapidly closer to the ambient air temperature of 350 K towards the fin end, located at a distance of 0.035 m; it was found to have a significant influence on the heat transfer around the fin-attached channel tube. The wider the vertical flow path, the lower the total heat transfer coefficient. However, the overall heat transfer coefficient increased as the horizontal flow path narrowed. The increment is attributed to an increase in the heat transfer amount due to increased heat transfer surface.

Keywords

Acknowledgement

This work was supported by the Regional Innovation Project based on Local Government-University Cooperation [Smart Manufacturing Engineering for Innovation Platform in Gyeongsangnam-do] grant funded by the Ministry of Education[National Research Foundation of Korea(NRF)].

References

  1. Jeon, S. H., Kim, Y. H., Lee. K. J., "Numerical Study of Heat Transfer Enhancement on Microchannel Plate Heat Exchanger with Channel Shape", Proceedings of the KSME Spring Conference, pp. 1000-1005, 2007.
  2. Yan, S. N., Park, Y. M., Jeong, Y. M., Lee, J. K., Park, Y. M., "An Experimental Study on the Performance of Aluminum Microchannel Tube Condensers According to the Number of Passes", Proceedings of the The Society of Air-Conditioning and Refrigerating Engineers Of Korea, pp. 1214-1219, 2010.
  3. Suh, J. S., Ro, S. T., "Analysis of Ice - Formation Phenomena for Fully Developed Laminar Water Flow in Concentric Circular - Tube Annuli," Trans. Korean Soc. Mech. Eng. Vol. 21, No. 11, pp. 1552-1561, 1997.
  4. Park, C. Y., Pega, H., "Experimental and numerical study on microchannel and round-tube condensers in a R410A residential air-conditioning system", International Journal of refrigeration, Vol. 31, pp. 822-831, 2008. https://doi.org/10.1016/j.ijrefrig.2007.10.007
  5. Park, Y. S., Seong, H. S., Suh, J. S., "A Study on the Basic Shape of an MF Evaporator," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 6, pp. 39-44, 2019. https://doi.org/10.14775/ksmpe.2019.18.6.039
  6. Jacobi, A. M. and Shah, R. K., "Air-side flow and heat transfer in compact heat exchangers:A discussion of enhancement mechanism," Heat Transfer Engineering, Vol. 19, No. 4, pp. 29-41, 1998. https://doi.org/10.1080/01457639808939934
  7. Sahnoun, A. and Webb, R. L., "Prediction of heat transfer and friction for the louver fin geometry," ASME Trans. J. Heat Transfer, Vol. 114, pp. 893-900, 1992. https://doi.org/10.1115/1.2911898
  8. Zukasukas, A. and Ulinskas, R., "Heat Transfer in Banks of Tubes in Crossflow," Hemisphere, New York, 1988.
  9. Moh, J. H. and Lee, S. H., "Numerical Analysis for the Air-Side Convective Heat Transfer Characteristics in a Compact Heat Exchanger with Circular Tubes and Continuous Plate Fins," Trans. Korean Soc. Mech. Eng. B, Vol. 34, No. 3, pp. 291-299, 2007.
  10. Giordano, R., Ianiro, A., Astarita, T. and Carlomagno, G. M., "Flow Field and Heat Transfer on the Base Surface of a Finite Circular Cylinder in Crossflow," Applied Thermal Engineering, Vol. 49, pp. 1-10, 2011. https://doi.org/10.1016/j.applthermaleng.2011.10.044
  11. Lee, C. H., Suh, J. S., "Numerical Analysis on the Freezing Process of Internal Water Flow in a L-Shape Pipe," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp. 144-150, 2018. https://doi.org/10.14775/ksmpe.2018.17.6.144
  12. Park, Y. S., Suh, J. S., "Numerical Analysis of Freezing Phenomena of Water in a U-Type Tube," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 12, pp. 52-58, 2019. https://doi.org/10.14775/ksmpe.2019.18.12.052