DOI QR코드

DOI QR Code

Experimental study on shear, tensile, and compression behaviors of composite insulated concrete sandwich wall

  • Zhang, Xiaomeng (China Architecture Design & Research Group) ;
  • Zhang, Xueyong (ANNENG Green Building Science and Technology Co., Ltd.) ;
  • Liu, Wenting (China Architecture Design & Research Group) ;
  • Li, Zheng (China Architecture Design & Research Group) ;
  • Zhang, Xiaowei (School of Civil and Transportation Engineering, Hebei University of Technology) ;
  • Zhou, Yilun (China Architecture Design & Research Group)
  • 투고 : 2020.07.29
  • 심사 : 2020.12.03
  • 발행 : 2021.01.25

초록

A new type of composite insulated concrete sandwich wall (ICS-wall), which is composed of a triangle truss steel wire network, an insulating layer, and internal and external concrete layers, is proposed. To study the mechanical properties of this new ICS-wall, tensile, compression, and shearing tests were performed on 22 specimens and tensile strength and corrosion resistance tests on 6 triangle truss joints. The variables in these tests mainly include the insulating plate material, the thickness of the insulating plate, the vertical distance of the triangle truss framework, the triangle truss layout, and the connecting mode between the triangle truss and wall and the material of the triangle truss. Moreover, the failure mode, mechanical properties, and bearing capacity of the wall under tensile, shearing, and compression conditions were analyzed. Research results demonstrate that the concrete and insulating layer of the ICS-wall are pulling out, which is the main failure mode under tensile conditions. The ICS-wall, which uses a graphite polystyrene plate as the insulating layer, shows better tensile properties than the wall with an ordinary polystyrene plate. The tensile strength and bearing capacity of the wall can be improved effectively by strengthening the triangle truss connection and shortening the vertical distances of the triangle truss. The compression capacity of the wall is mainly determined by the compression capacity of concrete, and the bonding strength between the wall and the insulating plate is the main influencing factor of the shearing capacity of the wall. According to the tensile strength and corrosion resistance tests of Austenitic stainless steel, the bearing capacity of the triangle truss does not decrease after corrosion, indicating good corrosion resistance.

키워드

과제정보

We would like to extend our sincere gratitude to ANNENG Green Building Science and Technology Co., Ltd for funding the test and to Institute of Building Materials, China Academy of Building Research for supporting this program.

참고문헌

  1. Al-Azzawi, A.A., Daud, R.A. and Daud, S.A. (2020), "Behavior of tension lap spliced sustainable concrete flexural members", Adv. Concrete Constr., 9(1), 83-92. http://dx.doi.org/10.12989/acc.2020.9.1.083.
  2. Ali, B., Sabry, F. and Walid, M. (2020), "Flexural strengthening of RC one way solid slab with Strain Hardening Cementitious Composites (SHCC)", Adv. Concrete Constr., 9(5), 511-527. http://dx.doi.org/10.12989/acc.2020.9.5.511.
  3. Benayoune, A., Samad, A.A., Ali, A.A. and Trikha, D.N. (2007), "Response of pre-cast reinforced composite sandwich panels to axial loading", Constr. Build. Mater., 21(3), 677-685. https://doi.org/10.1016/j.conbuildmat.2005.12.011.
  4. Benayoune, A., Samad, A.A.A., Trikha, D.N., Ali, A.A.A. and Ashrabov, A.A. (2006), "Structural behaviour of eccentrically loaded precast sandwich panels", Constr. Build. Mater., 20(9), 713-724. https://doi.org/10.1016/j.conbuildmat.2016.01.020.
  5. Bunn, W.G. (2011), "CFRP grid/rigid foam shear transfer mechanism for precast prestressed concrete sandwich wall panels", Master's Thesis Raleigh, North Carolina State University, NC.
  6. Bush, T.D. and Stine, G.L. (1994), "Flexural behavior of composite precast concrete sandwich panels with continuous truss connectors", PCI J., 39(2), 112-121. https://doi.org/10.15554/pcij.03011994.112.121
  7. Carbonari, G., Cavalaro, S.H.P., Cansario, M.M. and Aguado, A. (2012), "Flexural behaviour of light-weight sandwich panels composed by concrete and EPS", Constr. Build. Mater., 35, 792-799. https://doi.org/10.1016/j.conbuildmat.2012.04.080.
  8. Choi, I., Kim, J.H. and You, Y.C. (2016), "Effect of cyclic loading on composite behavior of insulated concrete sandwich wall panels with GFRP shear connectors", Compos., 96, 7-19. https://doi.org/10.1016/j.compositesb.2016.04.030.
  9. Choi, K.B., Choi, W.C., Feo, L., Jang, S.J. and Yun, H.D. (2015), "In-plane shear behavior of insulated precast concrete sandwich panels reinforced with corrugated GFRP shear connectors", Compos. Part B, 79, 419-429. http://dx.doi.org/10.1016/j.compositesb.2015.04.056.
  10. Choi, W., Jang, S.J. and Yun, H.D. (2019), "Design properties of insulated precast concrete sandwich panels with composite shear connectors", Compos., 157, 36-42. http://dx.doi.org/10.1016/j.compositesb.2018.08.081.
  11. Furuya, K., Kitagawa, M., Nakamura, S.I. and Suzumura, K. (2000), "Corrosion mechanism and protection methods for suspension bridge cables", Struct. Eng. Int., 10(3), 189-193. https://doi.org/10.2749/101686600780481518
  12. Ganesan, N., Indira, P.V. and Seena, P. (2014), "High performance fibre reinforced cement concrete slender structural walls", Adv. Concrete Constr., 2(4), 309-324. http://dx.doi.org/http://dx.doi.org/10.12989/.2014.2.4.309.
  13. Maximos, H.N., Pong, W.A., Tadros, M.K. and Martin, D.L. (2007), "Behavior and design of compositeprecast prestressed concrete sandwich panels with NUTie", University of Nebraska-Lincoln, Lincoln, NE.
  14. Maximos, H.N., Pong, W.A., Tadros, M.K. and Martin, D.L. (2007), "Behavior and design of composite precast prestressed concrete sandwich panels with NUTie", University of Nebraska-Lincoln, Lincoln, NE.
  15. Pessiki, S. and Mlynarczyk, A. (2003), "Experimental evaluation of the composite behavior of precast concrete behavior of precast concrete sandwich wall panels", PCI J., 42(8), 54-71.
  16. Schmitt, A., Carvelli, V. and Pahn, M. (2015), "Thermomechanical loading of GFRP reinforced thin concrete panels", Compos. Part B Eng., 81, 35-43. http://dx.doi.org/10.1016/j.compositesb.2015.06.020.
  17. Standard for Test Method of Mechanical Properties on Ordinary Concrete, GB/T 50081-2002.
  18. Steel for the Reinforcement of Concrete-Part 1: Hot Rolled Plain Bars, GB/T 1499.1-2017.
  19. Suzumura, K. and Nakamura, S. (2004), "Environmental factors affecting corrosion of galvanized steel wires", ASCE J. Mater. Civil Eng., 16(1), 1-7. https://doi.org/10.1061/(ASCE)0899-1561(2004)16:1(1)
  20. Yuanbo, Z., Wuman, Z. and Yingchen, Z. (2019), "Combined effect of fine aggregate and silica fume on properties of Portland cement pervious concrete", Adv. Concrete Constr., 8(1), 47-54. http://dx.doi.org/10.12989/acc.2019.8.1.047.
  21. Yun, H.D., Jang, S.J. and You, Y.C. (2012), "Direct shear responses of insulated concrete sandwich panels with GFRP shear connectors", Appl. Mech. Mater., 204-208, 803-806. https://doi.org/10.4028/www.scientific.net/AMM.204-208.803
  22. Zhanggen, G., Weimin, S., Yang, P. and Jialiang, L. (2011), "Experimental study on the compression behavior of recycled aggregates concrete small hollow block masonry", Build. Struct., 41(8), 127-123.