한국표면공학회지 (Journal of Surface Science and Engineering)

  • 제54권6호
  • /
  • Pages.324-330
  • /
  • 2021
  • /
  • 1225-8024(pISSN)
  • /
  • 2288-8403(eISSN)
한국표면공학회 (The Korean Institute of Surface Engineering)
권호 표지
DOI QR코드

DOI QR Code

Triboelectric Nanogenerator (TENG)를 위한 Rutile TiO2 박막 성능 및 특성 평가

Evaluating the performance and characteristics of Rutile TiO2 thin film for Triboelectric Nanogenerator (TENG)

  • 문지현 (한양대학교 ERICA 재료화학공학과) ;
  • 김한재 (한양대학교 ERICA 재료화학공학과) ;
  • 김효배 (한양대학교 ERICA 재료화학공학과) ;
  • 안지훈 (한양대학교 ERICA 재료화학공학과)
  • Moon, Ji-Hyeon (Department of Materials Science and Chemical Engineering, Hanyang university) ;
  • Kim, Han-Jae (Department of Materials Science and Chemical Engineering, Hanyang university) ;
  • Kim, Hyo-Bae (Department of Materials Science and Chemical Engineering, Hanyang university) ;
  • Ahn, Ji-Hoon (Department of Materials Science and Chemical Engineering, Hanyang university)
  • 투고 : 2021.11.30
  • 심사 : 2021.12.22
  • 발행 : 2021.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

As energy harvesting technology becomes important in relation to environmental issues, piezoelectric materials that convert mechanical energy into electrical energy are attracting attention. However, PZT, a representative material for piezoelectricity, is becoming difficult to use due to the problem that its components can cause environmental pollution. For this reason, recent research suggests a triboelectric nanogenerator (TENG) that generates energy through the combined effect of triboelectricity and electric induction for alternative piezoelectric devices. In TENG, electrical power is determined by the dielectric constant, thickness, and grain generation of the charged material. Therefore, in this study, a Rutile phase TiO2 thin film with high dielectric constant was formed using the spin-coating process and the effect of annealing was investigated. For electrical analysis, a TENG device was fabricated using PTFE as a material with an opposite charge, and electrical output according to film thickness and grain formation was comparatively analyzed.

키워드

참고문헌

  1. A. Manbachi, R.S. Cobbold, Development and application of piezoelectric materials for ultrasound generation and detection, Ultrasound, 19 (2011) 187-196. https://doi.org/10.1258/ult.2011.011027
  2. T. Tanaka, Piezoelectric devices in Japan, Ferroelectrics, 40 (1982) 167-187. https://doi.org/10.1080/00150198208218168
  3. H.S. Kim, J.-H. Kim, J. Kim, A review of piezoelectric energy harvesting based on vibration, Int. J. Precis. Eng. Manuf., 12 (2011) 1129-1141. https://doi.org/10.1007/s12541-011-0151-3
  4. B. Jaffe, R. Roth, S. Marzullo, Piezoelectric properties of lead zirconate-lead titanate solid-solution ceramics, J. Appl. Phys., 25 (1954) 809-810. https://doi.org/10.1063/1.1721741
  5. A. Ahmed, I. Hassan, A.S. Helal, V. Sencadas, A. Radhi, C.K. Jeong, M.F. El-Kady, Triboelectric nanogenerator versus piezoelectric generator at low frequency (< 4 Hz): a quantitative comparison, Iscience, 23 (2020) 101286. https://doi.org/10.1016/j.isci.2020.101286
  6. A.D. Kuo, Harvesting energy by improving the economy of human walking, Science, 309 (2005) 1686-1687. https://doi.org/10.1126/science.1118058
  7. Y. Yang, H. Zhang, J. Chen, Q. Jing, Y.S. Zhou, X. Wen, Z.L. Wang, Single-electrode-based sliding triboelectric nanogenerator for self-powered displacement vector sensor system, Acs Nano, 7 (2013) 7342-7351. https://doi.org/10.1021/nn403021m
  8. J.H. Jung, D.-M. Lee, Y.J. Kim, S.-W. Kim, Recent Trends in Energy Harvesting Technology Using Composite Materials, Ceramist, 22 (2019) 110-121. https://doi.org/10.31613/ceramist.2019.22.2.03
  9. S. Roberts, Dielectric constants and polarizabilities of ions in simple crystals and barium titanate, Phys. Rev., 76 (1949) 1215. https://doi.org/10.1103/PhysRev.76.1215
  10. Z.-H. Lin, Y. Xie, Y. Yang, S. Wang, G. Zhu, Z.L. Wang, Enhanced triboelectric nanogenerators and triboelectric nanosensor using chemically modified TiO2 nanomaterials, ACS nano, 7 (2013) 4554-4560. https://doi.org/10.1021/nn401256w
  11. Y.J. Kim, J. Lee, S. Park, C. Park, C. Park, H.-J. Choi, Effect of the relative permittivity of oxides on the performance of triboelectric nanogenerators, RCS Adv., 7 (2017) 49368-49373.
  12. J. Spiridonova, A. Katerski, M. Danilson, M. Krichevskaya, M. Krunks, I. Oja Acik, Effect of the titanium isopropoxide: acetylacetone molar ratio on the photocatalytic activity of TiO2 thin films, Molecules, 24 (2019) 4326. https://doi.org/10.3390/molecules24234326
  13. R. Kronig, Textbook of Physics: Under the Editorship of R. Kronig in Collaboration with J. De Boer [and Others] With Biographical Notes and Tables by J. Korringa, Pergamon Press, 1959.
  14. S.-D. Mo, W. Ching, Electronic and optical properties of three phases of titanium dioxide: Rutile, anatase, and brookite, Phys. Rev. B, 51 (1995) 13023. https://doi.org/10.1103/physrevb.51.13023
  15. B.R. Rehani, P. Joshi, K.N. Lad, A. Pratap, Crystallite size estimation of elemental and composite silver nano-powders using XRD principles, (2006).
  16. N.-S. Kim, S.-H. Kim, Effect of Alcohol Solvents and Calcination Temperature on the Synthesis of Titanium Dioxide Particles, J. Korean. Appl. Sci. Technol., 26 (2009) 473-482.
  17. S. Amirtharajan, P. Jeyaprakash, J. Natarajan, P. Natarajan, Electrical investigation of TiO 2 thin films coated on glass and silicon substrates-effect of UV and visible light illumination, Appl. Nanosci., 6 (2016) 591-598. https://doi.org/10.1007/s13204-015-0464-0