Acknowledgement
This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (NO.2020R1C1C1004971).
References
- M. Rezaei, M. S. Park, C. Rabinowitz, C. L. Tan, S. Wheaton, M. Ulmer, and H. Mohseni, "InGaAs based Heterojunction Phototransistors: Viable Solution for High-speed and Lownoise Short Wave Infrared Imaging", Appl. Phys. Lett., 114, 161101 (2019). https://doi.org/10.1063/1.5091052
- J. Jiang, S. Tsao, T. O'Sullivan, M. Razeghi, and G. J. Brown, "Fabrication of Indium Bumps for Hybrid Infrared Focal Plane Array Applications," Infrared Phys. Technol., 45(2), 143-151 (2004). https://doi.org/10.1016/j.infrared.2003.08.002
- M. Datta, "Manufacturing Processes for Fabrication of Flipchip Micro-bumps Used in Microelectronic Packaging: An Overview," J. Micromanufacturing, 3(1), 69-83 (2020). https://doi.org/10.1177/2516598419880124
- L. Liu, J. Rabinowitz, S. Bianconi, M. S. Park, and H. Mohseni, "Highly Sensitive SWIR Detector Array Based on Nanoscale Phototransistors Integrated on CMOS Readout," Appl. Phys. Lett., 117, 191102 (2020). https://doi.org/10.1063/5.0024259
- K. M. Chu, J. S. Lee, H. S. Cho, B. S. Rho, H. H. Park, and D. Y. Jeon, "Characteristics of Indium Bump for Flip-Chip Bonding Used in Polymeric-Waveguide-Integrated Optical Interconnection Systems," Jpn. J. Appl. Phys., 43(8B), 5922-5927 (2004). https://doi.org/10.1143/JJAP.43.5922
- N. C. Das, M. Taysing-Lara, K. A. Olver, F. Kiamilev, J. P. Prineas, J. T. Olesberg, E. J. Koerperick, L. M. Murray, and T. F. Boggess, "Flip Chip Bonding of 68×68 MWIR LED Arrays," IEEE Transactions on Electronics Packaging Manufacturing, 32(1), 9-13 (2009). https://doi.org/10.1109/TEPM.2008.2005062
- M. Rezaei, M. S. Park, C. L. Tan, and H. Mohseni, "Sensitivity Limit of Nanoscale Phototransistors," IEEE Electron Devices Lett. 38(8), 1051 (2017). https://doi.org/10.1109/LED.2017.2721381
- A. Rogalski, P. Martyniuk, and M. Kopytko, "Challenges of Small-pixel Infrared Detectors: A Review," Rep. Prog. Phys., 79, 046501 (2016). https://doi.org/10.1088/0034-4885/79/4/046501
- M. S. Park, M. Rezaei, K. Barnhart, C. L. Tan, and H. Mohseni, "Surface Passivation and Aging of InGaAs/InP Heterojunction Phototransistor," J. Appl. Phys., 121, 233105 (2017). https://doi.org/10.1063/1.4986633
- J. Yang, "Processing Procedures for CYCLOTENE 3000 Series Dry Etch Resins," DOW Chemical Co. (2005).
- P. Kozlowski, K. Czuba, K. Chmielewski, J. Ratajczak, J. Branas, A. Korczyc, K. Reginski, and A. Jasik, "Indium-Based Micro-Bump Array Fabrication Technology with Added Pre-Reflow Wet Etching and Annealing," Materials, 14, 6269 (2021). https://doi.org/10.3390/ma14216269
- H. Qiuping, X. Gaowei, Q. Gang, Y. Yuan, and Luo Le, "Electroplated Indium Bump Arrays and the Bonding Reliability," J. Semicond., 31(11), 116004 (2010). https://doi.org/10.1088/1674-4926/31/11/116004
- Q. Huang, G. Xu, Y. Yuan, X. Cheng, and L. Luo, "Development of Indium Bumping Technology through AZ9260 Resist Electroplating," J. Micromech. Microeng., 20, 055035 (2010). https://doi.org/10.1088/0960-1317/20/5/055035
- Y. Huang, C. Lin, Z. H. Ye, and R. J. Ding, "Reflow Flipchip Bonding Technology for Infrared Detectors," J. Micromech. Microeng., 25, 85009 (2015). https://doi.org/10.1088/0960-1317/25/8/085009
- P. Merken, J. John, L. Zimmermann, and C. V. Hoof, "Technology for Very Dense Hybrid Detector Arrays Using Electroplated Indium Solderbumps," IEEE Trans. Adv. Packag., 26(1), pp. 60-64 (2003). https://doi.org/10.1109/TADVP.2003.811550
- D. Johannsmann, A. Langhoff, and C. Leppin, "Studying Soft Interfaces with Shear Waves: Principles and Applications of the Quartz Crystal Microbalance (QCM)," Sensors, 21, 3490 (2021). https://doi.org/10.3390/s21103490
- K. Huang, and L. Szlufarska, "Friction and Slip at Solid/liquid Interface in Vibrational Systems," Langmuir, 28(50), pp. 17302-17312 (2012). https://doi.org/10.1021/la303381z