Journal of the Microelectronics and Packaging Society (마이크로전자및패키징학회지)

The Korean Microelectronics and Packaging Society (한국마이크로전자및패키징학회)
권호 표지
DOI QR코드

DOI QR Code

Fine Flow Controlling Device for Medicine Injection

의료 약물주입용 미세 유량 제어 장치

  • Cho, Su-Chan (Department of Cogno-Mechatronics Engineering, Pusan National University) ;
  • Shin, Bo-Sung (Department of Optics and Mechatronics Engineering, Pusan National University)
  • 조수찬 (부산대학교 인지메카트로닉스공학과) ;
  • 신보성 (부산대학교 광메카트로닉스공학과)
  • Received : 2021.12.01
  • Accepted : 2021.12.10
  • Published : 2021.12.30
Download PDF
⟨ Previous Next ⟩

Abstract

The nurses manually carry out the intravenous therapy for the patients. Using an Arduino, the fine flow controlling device was invented to provide an ongoing patient care. The medication is injected through a peristaltic pump, and the amount of the solution is controlled with a RGB color sensor. The power of the device is supplied through the batteries. An amount of the injection is measured with LIG strain sensor fabricated by 355nm UV pulsed laser. This system will provide a better medical service.

본 논문은 보통 병원에서 간호사가 수작업으로 진행하는 약물주입 과정을 대신할 수 있는 의료용 미세 유량 제어 장치를 소개한다. 이는 아두이노로 구현되었으며 환자의 지속적인 관리에 도움이 되고자 한다. 기본적으로 연동펌프를 통해 약물이 주입되며 RGB color sensor를 통해 배출액의 색상을 값으로 받아들이고 이 값을 바탕으로 수액백에 달린 연동펌프의 모터 속도를 조절하는 알고리즘을 아두이노 코딩을 통해 구현한다. 전체적인 시스템은 배터리를 통해 작동되며 연구실에서 355nm UV pulsed laser를 통해 제작한 LIG strain sensor의 추가를 통해 수액백으로부터 주입되는 약물의 양을 측정한다. 이렇게 제작된 미세 유량 제어 장치는 모든 과정을 수작업으로 진행해오던 병원에 곧장 사용 가능하며 간호사의 편의를 제공하고자 한다. 이 장치를 통해 한층 향상된 의료서비스를 제공할 수 있다.

Keywords

Acknowledgement

이 과제는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

References

  1. S. S. Ngu, L. C. Kho, T. P. Tan and M. S. Osman, "Design of the Roller Clamp Robotic Assembly System", International Journal of Mechanical and Mechatronics Engineering, 6(8), 1388-1394 (2012).
  2. M. Husch, C. Sullivan, D. Ronney, C. Barnard, M. Fotis, J. Clarke and G. Noskin, "Insights from the Sharp End of Intravenous Medication Errors: Implications for Infusion Pump Technology", BMJ Quality & Safety, 14(2), 80-86 (2005). https://doi.org/10.1136/qshc.2004.011957
  3. S. R. Perumal and F. Baharum, "Measurement, Simulation, and Quantification of Lighting-Space Flicker Risk Levels Using Low-Cost TCS34725 Colour Sensor and IEEE 1789-2015 Standard", Journal of Daylighting, 8(2), 239-254 (2021). https://doi.org/10.15627/jd.2021.19
  4. K. McMaster, L. Luis Sanchez-Ramos and A, M. Kaunitz, "Evaluation of a Transcervical Foley Catheter as a Source of Infection: A Systematic Review and Meta-analysis", Obstetrics & Gynecology, 126(3), 539-551 (2015). https://doi.org/10.1097/AOG.0000000000001002
  5. Z. Zhou, S. Zhao, Y. Lu, J. Wu, Y. Li, Z. Gao and Y. Cui, "Meta-analysis of Efficacy and Safety of Continuous Saline Bladder Irrigation Compared with Intravesical Chemotherapy after Transurethral Resection of Bladder Tumors", World journal of urology, 1-10 (2019).
  6. M. Wacker, "Nanocarriers for Intravenous Injection-the Long Hard Road to the Market", International Journal of Pharmaceutics, 457(1), 50-62 (2013). https://doi.org/10.1016/j.ijpharm.2013.08.079
  7. S. Pang, X. Cui, J. DeModena, Y. M. Wang, P. Sternberg and C. Yang, "Implementation of a Color-capable Optofluidic Microscope on a RGB CMOS Color Sensor Chip Substrate", Lab on a Chip, 10(4), 411-414 (2010). https://doi.org/10.1039/b919004j
  8. Y. Zhang, N. Li, Y. Xiang, D. Wang, P. Zhang, Y. Wang and J. Zhao, "A Flexible Non-enzymatic Glucose Sensor Based on Copper Nanoparticles Anchored on Laser-induced Graphene", Carbon, 156, 506-513 (2020). https://doi.org/10.1016/j.carbon.2019.10.006
  9. S. Y. Jeong, Y. W. Ma, J. U. Lee, G. J. Je and B. S. Shin, "Flexible and Highly Sensitive Strain Sensor Based on Laser-Induced Graphene Pattern Fabricated by 355 nm Pulsed Laser", Sensors, 19(22), 4867 (2019). https://doi.org/10.3390/s19224867
  10. B. Han and J. Ou, "Embedded Piezoresistive Cement-based Stress/strain Sensor", Sensors and Actuators A: Physical, 138(2), 294-298 (2007). https://doi.org/10.1016/j.sna.2007.05.011
  11. L. Huang, H. Wang, P. Wu, W. Huang, W. Gao, F. Fang and Z. Zhu, "Wearable Flexible Strain Sensor Based on Three-dimensional Wavy Laser-induced Graphene and Silicone Rubber", Sensors, 20(15), 4266 (2020). https://doi.org/10.3390/s20154266
  12. A. Chhetry, M. Sharifuzzaman, H. Yoon, S. Sharma, X. Xuan and J. Y. Park, "MoS2-decorated Laser-induced Graphene for a Highly Sensitive, Hysteresis-free, and Reliable Piezoresistive Strain Sensor", ACS Applied Materials & Interfaces, 11(25), 22531-22542 (2019). https://doi.org/10.1021/acsami.9b04915