Computers and Concrete

  • 제26권5호
  • /
  • Pages.429-438
  • /
  • 2020
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Thermal cracking assessment for nuclear containment buildings using high-strength concrete

  • Yang, Keun-Hyeok (Department of Architectural Engineering, Kyonggi University) ;
  • Mun, Jae-Sung (R&D Team, GEOPRO Co., Ltd.) ;
  • Kim, Do-Gyeum (Structural Engineering & Bridges Research Division, Korea Institute of Construction Technology) ;
  • Chang, Chun-Ho (Department of Civil Engineering, Keimyung University) ;
  • Mun, Ju-Hyun (Department of Architectural Engineering, Kyonggi University)
  • 투고 : 2020.06.19
  • 심사 : 2020.11.03
  • 발행 : 2020.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

To shorten the construction times of nuclear facility structures, three high-strength concrete mixtures were developed with specific consideration given to their curing temperatures, their economic efficiency, and the practicality of their quality control. This study was conducted to examine the temperature rise profiles of these three concrete mixtures and the potential for early-age thermal cracking in the primary containment vessel of a nuclear reactor with a wall thickness of 1200 mm. The one-layer placement height of the concrete for the primary containment vessel was increased from the conventional 3 m to 3.5 m. A nonlinear finite element analysis (FEA) was conducted using the thermal properties of concrete determined from the isothermal hydration and adiabatic hydration tests, and tuned through comparisons made with temperature rise profiles obtained for 1200-mm-thick mock-up wall specimens cured at temperatures of 5, 20, and 35℃. The hydration heat performance of the three concrete mixtures and their potential to produce thermal cracking in nuclear facilities indicate that the mixtures have considerable potential for practical application to the primary containment vessel of a nuclear reactor at various curing temperatures, fulfilling the minimum requirements of the ACI 301 and minimizing the likelihood of the occurrence of thermal cracks.

키워드

과제정보

This research was supported by Basic Science Research Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science, ICT & Future Planning (No. 2015R1A5A1037548) and Korea Basic Science Institute (National research Facilities and Equipment Center) grant funded by the Ministry of Education (grant No.2020R1A6C1020263).

참고문헌

  1. ACI committee 301 (2010), Specifications for Structural Concrete (ACI 301-10), American Concrete Institute, Farmington Hills, MIAMI.
  2. ACI committee 306 (2010), Guide to Cold Weather Concreting (ACI 306R-10), American Concrete Institute, Farmington Hills, MIAMI.
  3. ACI Committee 318 (2019), Building code requirements for structural concrete (ACI 318-19) and commentary. American Concrete Institute, Farmington Hills, MI.
  4. ACI committee 349 (2006), Code for Requirements for Nuclear Safety-Related Concrete Structures and Commentary (ACI 349-06), American Concrete Institute, Farmington Hills, MIAMI.
  5. ASME BPVC III Div.2. (2013), Rules for Construction of Nuclear Facility Components: Code for Concrete Containments, ASME International.
  6. ASTM C618, C989, C138, C469, C1074, Annual Book of ASTM Standards: V. 4.02, ASTM International, 2012.
  7. Atis, C.D. (2002), "Heat evolution of high-volume fly ash concrete", Cement Concrete Res., 32(5), 751-756. https://doi.org/10.1016/S0008-8846(01)00755-4.
  8. Bamforth, P.B. (1980), "In situ measurement of the effect of partial portland cement replacement using either fly ash or ground granulated blast furnace slag on the performance of mass concrete", Proc. Inst. Civil Eng., 69, 777-800.
  9. Bentz, D.P., Peltz, M.A., Duran-Herrera, A., Valdez, P. and Juarez, C.A. (2011), "Thermal properties of high-volume fly ash mortars and concretes", J. Build. Phys., 34(3), 263-275. https://doi.org/10.1177/1744259110376613.
  10. Broda, M., Wirquin, E. and Duthoit, B. (2002), "Conception of an isothermal calorimeter for concrete-determination of the apparent activation energy", Mater. Struct., 35(7), 389-394. https://doi.org/10.1007/BF02483141.
  11. Chu, I., Lee, Y., Amin, M.N., Jang, B.S. and Kim, J.K. (2013), "Application of a thermal stress device for the prediction of stresses due to hydration heat in mass concrete structure," Constr. Build. Mater., 45, 192-198. https://doi.org/10.1016/J.CONBUILDMAT.2013.03.056.
  12. Cyr, M., Lawrence, P. and Ringot, E. (2006), "Efficiency of mineral admixtures in mortars: quantification of the physical and chemical effects of fine admixtures in relation with compressive strength", Cement Concrete Res., 36(2), 264-277. https://doi.org/10.1016/j.cemconres.2005.07.001.
  13. De Schutter, G. and Taerwe, L. (1995), "General hydration model for portland cement and blast furnace slag cement", Cement Concrete Res., 25(3), 593-604. https://doi.org/10.1016/0008-8846(95)00048-H.
  14. Jalilzadeh Afshari, M., Kheyroddin, A. and Gholhaki, M. (2018), "Simplified time-dependent column shortening analysis in special reinforced concrete moment frames", Struct. Des. Tall Spec. Build., 62(1), 232-249. https://doi.org/10.3311/PPci.10679.
  15. Jezo, Ľ., Ifka, T., Cvopa, B., Skundova, J., Kovar, V. and Palou, M. (2010), "Effect of temperature upon the strength development rate and upon the hydration kinetics of cements", Ceram. Silik., 54(3), 269-276.
  16. Klemczak, B. (2019), "Analytical method for predicting early age thermal effects in thick foundation slabs", Mater., 12, 1-17. https://doi.org/10.3390/ma12223689.
  17. Lee,Y., Kim, Y.Y., Hyun, J.H. and Kim, D.G. (2014), "Thermal stress analysis of reactor containment building considering severe weather condition", Nucl. Eng. Des., 270, 152-161. https://doi.org/10.1016/j.nucengdes.2014.01.005.
  18. Maekawa, K., Chaube, R. and Kishi, T. (1998), Modeling of Concrete Performance: Hydration, Microstructure Formation and Mass Transport, Routledge, London.
  19. Midas FEA (2013), Analysis and Algorithm, MIDAS-Advanced Nonlinear and Detail Analysis Program, Bundang, Gyonggido, Korea.
  20. Mun, J.S. (2016) "Generalized model for compreessive strength development of concrete considering the addition of supplementary cementitious materials and curing temperatures", Ph.D. Thesis, Kyonggi University.
  21. Nili, M. and Salehi, A.M. (2010), "Assessing the effectiveness of pozzolans in massive high-strength concrete", Constr. Build. Mater., 24, 2108-2116. https://doi.org/10.1016/j.conbuildmat.2010.04.049.
  22. Stewart, J.P. and Tileylioglu, S. (2007), "Input ground motions for tall buildings with subterranean levels", Struct. Des. Tall Spec. Build., 16(5), 543-557. https://doi.org/10.1002/tal.429.
  23. Wang, X.Y. and Lee, H.S. (2010), "Modeling the hydration of concrete incorporating fly ash or slag", Cement Concrete Res., 40(7), 984-996. https://doi.org/10.1016/j.cemconres.2010.03.001.
  24. Yang K.H., Moon, G.D. and Jeon, Y.S. (2015), "Implementing ternary supplementary cementing binder for reduction of the heat of hydration of concrete", J. Clean. Prod., 112(part 1), 845-852. https://doi.org/10.1016/j.jclepro.2015.06.022.
  25. Yang, K.H. (2014), "High-strength concrete application technology for nuclear facilities", Technical Report, Department of Plant-Architectural Engineering, Kyonggi University, Suwon, Korea.
  26. Yang, K.H., Mun, J.S., Kim, D.G. and Cho, M.S. (2016), "Comparison of strength-maturity models accounting for hydration heat in massive walls," Int. J. Concrete Struct. Mater., 10(1), 47-60. https://doi.org/10.1007/S40069-016-0128-9.
  27. Zhu Z., Zhang G., Liu Y. and Wang Z. (2019), "Incremental extended finite element method for thermal cracking of mass concrete at early ages", Struct. Eng. Mech., 69(1), 33-42. https://doi.org/10.12989/sem.2019.69.1.033.