한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제19권7호
  • /
  • Pages.81-88
  • /
  • 2020
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

기저부에 생성된 작은 홈 형상과 결함이 박벽이 포함된 ABS 재료로 제작된 제품의 결합 영역 응력 분포에 미치는 영향

Effects of Geometry and Imperfection of a Small-sized Groove on Stress Distributions in the Vicinity of the Joined Region of an ABS Part with a Thin Wall

  • Ahn, Dong-Gyu (Dept of Mechanical Engineering, Chosun Univ.) ;
  • Hassan, Humayun (Dept of Mechanical Engineering, Chosun Univ.) ;
  • Baek, Sun Ho (Dept of Mechanical Engineering, Chosun Univ.) ;
  • Kim, Ho (Dept of Mechanical Engineering, Chosun Univ.)
  • 투고 : 2020.06.23
  • 심사 : 2020.07.05
  • 발행 : 2020.07.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The geometry and the defect of the groove of the part provoke a sudden change of stress in a local region. The objective of this paper is to investigate the effects of the geometry and the imperfection of a small groove on stress distributions in the vicinity of the joined region for the ABS part with a thin wall using a three-dimensional finite element analysis (FEA). Several types of groove are designed to improve joining characteristics in the vicinity joined region. The imperfection model of the small-sized groove is obtained from observation of deposition characteristics of a fused deposition modeling process. Local stress distributions in the vicinity of the joined region are predicted by the FE model with refined meshes. The influence of the angle and the imperfection of the groove on appearance regions of the maximum stress and distributions of the defined principal stress for different loading conditions is examined using the results of FEAs. Finally, a proper design of the groove is proposed to improve joining characteristics between the substrate and the ABS part.

키워드

참고문헌

  1. Weddeling, C., Woodward, S. T., Marre, M., Nellesen, J., Psyk, V., Tekkaya, A. E., and Tillmann, W., "Influence of Groove Characteristics on Strength of Form-fit Joints," Journal of Materials Processing Technology, Vol. 211, Issue. 5, pp. 925-935, 2011. https://doi.org/10.1016/j.jmatprotec.2010.08.004
  2. Tu, W., Wen, P. H., Hogg, P. J., and Guild, F. J., "Optimisation of the Protrusion Geometry in $Comeld^{TM}$ Joints," Composites Science and Technology, Vol. 71, Issue. 6, pp. 868-876, 2011. https://doi.org/10.1016/j.compscitech.2011.02.001
  3. Aripin, M. A., Sajuri, Z., Abdullah, S., Omar, M. Z., Zmari, W. F. H., Jamil, W. N. M., and Abdullah, M. F., "Microscale Groove Effect on Shear Strength of Epoxy-bonded Dissimilar Metal Plate," Journal of Adhesion Science and Technology, Vol. 30, No. 18, pp. 2001-2012, https://doi.org/10.1080/01694243.2016.1172441
  4. Gebisa, A. W., and Lemu, H. G., "Investigating Effects of Fused-Deposition Modeling (FDM) Processing Parameters on Flexural Properties of ULTEM 9085 Using Designed Experiment," Materials, Vol. 11, No. 4, pp. 500-522, 2018. https://doi.org/10.3390/ma11040500
  5. Kumar, R., Singh, R., and Ahuja, I. P. S., "Mechanical, Thermal and Micrographic Investigations of Friction Stir Welded: 3D Printed Melt Flow Compatible Dissimilar Thermoplastics," Journal of Manufacturing Processes, Vol. 38, pp. 387-395, 2019. https://doi.org/10.1016/j.jmapro.2019.01.043
  6. Bürenhaus, F., Moritzer, E., and Hirsh, A., "Adhesive Bonding of FDM-manufactured Parts Made of ULTEM 9085 Considering Surface Treatment, Surface Structure, and Joint Design," Welding in the World, Vol. 38, Issue. 6, pp. 1819-1832, 2019. https://doi.org/10.1007/s40194-019-00810-4
  7. Chen, K. -S., Yeh, H. -M., Yan, J. -L., and Chen, Y. -T., "Finite-element Analysis on Wafer-level CMP Contact Stress: Reinvestigated Issues and the Effects of Selected Process Parameters," International Journal of Advanced Manufacturing Technology, Vol. 42, Issue. 11-12, pp. 1118-1130, 2009. https://doi.org/10.1007/s00170-008-1672-5
  8. Kuznetsov, V. E., Solonin, A. N., Tavitov, A., Urzhumtsev, O., and Vakulik, A., "Increasing Strength of FFF Three-dimensional Printed Parts by Influencing on Temperature-related Parameters of the Process," Rapid Prototyping Journal, Vol. 26, No. 1, pp. 107-121, 2020. https://doi.org/10.1108/rpj-01-2019-0017
  9. Zareiyan, B., and Khoshnevis, B., "Effects of Interlocking on Interlayer Adhesion and Strength of Structures in 3D Printing of Concrete," Automation in Construction, Vol. 83, pp. 212-221, 2017. https://doi.org/10.1016/j.autcon.2017.08.019
  10. Sattari-Far, I., and Farahani, M. R., "Effect of the Weld Groove Shape and Pass Number on Residual Stresses in Butt-welded Pipes," International Journal of Pressure Vessels and Piping, Vol. 86, Issue 11, pp. 723-731, 2009. https://doi.org/10.1016/j.ijpvp.2009.07.007
  11. Beanumont, "Moldflow Material Characterization," https://www.beaumontinc.com/moldflow-material-characterization/, accessed by 2020.