Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Durability Analysis due to Design Shape of Pinion Gear

자동차용 피니언 기어의 설계 형상에 따른 내구성 해석

  • Choi, Kyekwang (Department of Metal Mold Design Engineering, Kongju National UNIV.) ;
  • Cho, Jaeung (Division of Mechanical and Automotive Engineering, Kongju National UNIV.)
  • 최계광 (공주대학교 금형설계공학과) ;
  • 조재웅 (공주대학교 기계자동차공학부)
  • Received : 2020.05.04
  • Accepted : 2020.05.25
  • Published : 2020.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

The structural analyses were conducted with three models of pinion gears connected to the rack gear which is driven by the steering axle at an automobile. Three models 1, 2 and 3 are designed as the different pinion gears due to the vehicle type. The lower the value of maximum stress, the better the durability of model. Model 3 has the best durability among three models. Models 1 and 2 are expected to require the adjustment in order to improve the durability better. By the utilization of this study result, it is thought to apply at designing the pinion gear with durability at the automobile.

Keywords

References

  1. Kim, J. Y., You, K. J., Gao, J. C. and Jung, Y. S., "A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.075
  2. Cho, S. J., Han, J. W., Park, Y. J. and Lee, G. H., "Structural analysis of a planetary gear carrier in the slewing reducer for tower crane," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 5, pp. 1-7, 2014. https://doi.org/10.14775/ksmpe.2014.13.5.001
  3. Jung, Y. S., Gao, J. C., Kim, J. Y. and You, G. J., "A Study on the Structural Analysis of Fiber Guide accept to 4C MM Optical Fiber," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 6, pp. 75-80, 2017. https://doi.org/10.14775/ksmpe.2017.16.6.075
  4. Ko, J. H. and Kang, D. M., "CAE Analysis on Strength and Fatigue of Rear Door of Passenger Car," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 3, pp. 63-69, 2014. https://doi.org/10.14775/ksmpe.2014.13.3.063
  5. Ha, S. H., Kim, S. J. and Song, J. I., "Structure Analysis and Torque Reduction Design of Industrial Ball Valve," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 6, pp. 37-45, 2014. https://doi.org/10.14775/ksmpe.2014.13.6.037
  6. Choo, S. W. and Jeong, S. H., "Structural and Dynamic Characteristic Analysis of a Feeder for an Automatic Assembly System of an LED Convergent Lighting Module," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 1, pp. 124-133, 2017. https://doi.org/10.14775/ksmpe.2016.16.1.124
  7. Kang, H. J., Kim, B. H., Kim, B. H. and Seo, J. H., "Structural Weld Strength Analysis on Door Hinge of Field Artillery Ammunition Support Vehicle," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 3, pp. 58-65, 2016. https://doi.org/10.14775/ksmpe.2016.15.3.058
  8. Son, I. S., Kim, C. H., Bae, S. H. and Lee, J. Y., "Rescue Lift Development Using Structural Analysis," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 111-116, 2015. https://doi.org/10.14775/ksmpe.2015.14.1.111
  9. Yoo, D. S., "A Study on Optimization for Static Characteristics Analysis of Gantry-Type Machining Centers," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 6, pp. 122-128, 2015. https://doi.org/10.14775/ksmpe.2015.14.6.122
  10. Kuk, Y. H. and Choi. H. J., "Analysis of Fluid-Structure Interaction of Cleaning System of Micro Drill Bits," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 1, pp. 8-13, 2015. https://doi.org/10.14775/ksmpe.2016.15.1.008
  11. Moon, D. J., Cho, J. H., Choi, Y. S., Hwang, I. H. and Lee, J. C., "High-Stiffness Structure Design of 8-Axis Multi-tasking Machine for Automotive Powertrain Shafts," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 78-83, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.078
  12. Lee, W. S., An, B. S., Kim, J. H. and Lee, J. C., "A Study on Structural Safety of Integrated Machine for Grinding Wheel Forming,"Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 2, pp. 84-88, 2016. https://doi.org/10.14775/ksmpe.2016.15.2.084
  13. Choi, G. G., "A Convergence Study through Durability Analysis due to the Configuration of Automotive Frame Butted," Journal of the Korea Convergence Society, Vol. 9, No. 11, pp. 271-276, 2018. https://doi.org/10.15207/JKCS.2018.9.11.271
  14. Lee, J. H. and Cho, J. U., "Study on Convergence Technique due to the Shape of Cruiser Board through Structural Analysis," Journal of the Korea Convergence Society, Vol. 6, No. 4, pp. 99-104, 2015. https://doi.org/10.15207/JKCS.2015.6.4.099
  15. Wang, J. H. and Kwon, Y. C., "Structural Analysis of Center Pillar according to Applied Load," Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 4, pp. 401-406, 2018. https://doi.org/10.17958/ksmt.20.4.201808.401
  16. Wang, J. H. and Kwon, Y. C., "Structural Analysis according to Load of Height-adjustable Table," Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 3, pp. 273-278, 2018. https://doi.org/10.17958/ksmt.20.3.201806.273