참고문헌
-
Thuault, A., Marinel, S., Savary, E., Heuguet. R., Saunier, S., Goeuriot, D., and Agrawal, D., "Processing of Reaction-bonded
$B_4C$ -SiC Composites in a Single-mode Microwave Cavity", Ceramics International, Vol. 39, 2013, pp. 1215-1219. https://doi.org/10.1016/j.ceramint.2012.07.047 -
Karabulut, S., Karakoc, H., and Citak, R., "Influence of
$B_4C$ Particle Reinforcement on Menchanical and Machining Properties of Al6061/$B_4C$ Composites", Composites Part B: Engineering, Vol. 101, 2016, pp. 87-98. https://doi.org/10.1016/j.compositesb.2016.07.006 -
Mandal, A., Murty, B.S., and Chakraborty, M., "Wear Behavior of Near Eutectic Al-Si Alloy Reinforced with in-situ
$TiB_2$ Particles", Materials Science and Engineering A, Vol. 506, 2009, pp. 27-33. https://doi.org/10.1016/j.msea.2008.11.007 -
Saraswat, R., Yadav, A., and Tyagi, R., "Sliding Wear Behaviour of
$Al-B_4C$ Cast Composites Under Dry Contact", Materialstoday: Proceedings, Vol. 5, 2018, pp. 16963-16972. -
Ipek, R., "Adhesive Wear Behavior of
$B_4C$ and SiC Reinforced 4147 Al Matrix Composite($Al/B_4C-Al/SiC$ )", Joual of Materials Processing Technology, Vol. 162-163, 2005, pp. 71-75. https://doi.org/10.1016/j.jmatprotec.2005.02.207 -
Shorowordi, K.M., and Laoui, T., "Microstructure and Interface Characteristics of
$B_4C$ , SiC and$Al_2O_3$ Reinforced Al Matrix Composites: A Comparative Study", Journal of Materials Processing Technology, Vol. 142, 2003, pp. 738-743. https://doi.org/10.1016/S0924-0136(03)00815-X -
Kerti, I., and Toptan, F., "Microstructural Variations in cast
$B_4C$ -reinforced Aluminium Matrix Composites (AMCs)", Materials Letters, Vol. 62, 2008, pp. 1215-1218. https://doi.org/10.1016/j.matlet.2007.08.015 -
Lakshmikantha, R.G., and Auradi, V., "Processing and Evaluation of
$Al/B_4C$ Particulate MMC's: Tensile Strength and Wear Properties under Different Elevated Temperature Test Condition", Materials Today: Proceedings, Vol. 28, 2020, pp. 504-509. - Domnich, V., Reynaud, S., Haber, R.A., and Chhowalla, M., "Moron Carbide: Structure, Properties, and Stability under Stress", Journal of the American Ceramic Society, Vol. 94, 2011, pp. 3605-3628. https://doi.org/10.1111/j.1551-2916.2011.04865.x
-
Wang, J., Lin, W., Jiang, Z., Duan, L., and Yang, G., "The Preparation and Properties of
$SiCw/B_4C$ Composites Infiltrated with Molten Silicon", Ceramics International, Vol. 40, 2014, pp. 6793-6798. https://doi.org/10.1016/j.ceramint.2013.12.003 - Manna, A., and Bhattacharayya, B., "A Study on Machinability of Al/SiC-MMC", Journal of Materials Processing Technology, Vol. 140, 2003, pp. 711-716. https://doi.org/10.1016/S0924-0136(03)00905-1
-
Ibrahim, M.F., Ammar, H.R., Samuel, A.M., Soliman, M.S., and Samuel, F.H., "On the Impact Toughness of Al-15 vol.%
$B_4C$ Metal Matrix Composites", Composites Part B: Engineering, Vol. 79, 2015, pp. 83-94. https://doi.org/10.1016/j.compositesb.2015.04.018 -
Baradeswaran, A., and Perumal, A.E., "Influence of
$B_4C$ on the Tribological and Mechanical Properties of Al 7075-$B_4C$ Composites", Composites Part B: Engineering, Vol. 54, 2013, pp. 146-152. https://doi.org/10.1016/j.compositesb.2013.05.012 -
Karabulut, S., Gokmen, U., and Cinici H., "Study on the Mechanical and Drilling Properties of AA7039 Composites Reinforced with
$Al_2O_3/B_4C$ /SiC Particles", Composites Part B: Engineering, Vol. 93, 2016, pp. 43-55. https://doi.org/10.1016/j.compositesb.2016.02.054 - Suh, N.P., "The Delamination Theory of Wear", Wear, Vol. 25, 1973, pp. 111-124. https://doi.org/10.1016/0043-1648(73)90125-7