참고문헌
- C. E. Ho, C. W. Fan, and W. Z. Hsieh, "Pronounced effects of Ni(P) thickness on the interfacial reaction and high impact resistance of the solder/Au/Pd(P)/Ni(P)/Cu reactive system", Surf. Coatings Technol., 259(PB), 244 (2014). https://doi.org/10.1016/j.surfcoat.2014.04.027
- C. Y. Ho and J. G. Duh, "Optimal Ni(P) thickness design in ultrathin-ENEPIG metallization for soldering application concerning electrical impedance and mechanical bonding strength", Mater. Sci. Eng. A, 611, 162, (2014). https://doi.org/10.1016/j.msea.2014.05.049
- P. Snugovsky, P. Arrowsmith, and M. Romansky, "Electroless Ni/immersion Au interconnects: Investigation of black pad in wire bonds and solder joints", J. Electron. Mater., 30(9), 1262 (2001). https://doi.org/10.1007/s11664-001-0159-z
- J. Back, B. Lee, S. Yoo, D. Han, S. Jung, and J. Yoon, "Solderability of thin ENEPIG plating Layer for Fine Pitch Package application", J. Microelectron. Packag. Soc., 24(1), 83 (2017). https://doi.org/10.6117/kmeps.2017.24.1.083
- S. Lamprecht and P. Backus, "High Phosphorus ENIG - highest resistance against corrosive environment Sven Lamprecht and Petra Backus Atotech Deutschland GmbH Berlin", HKPCA J., Q4(6), 1 (2002).
- S. H. Kim, J. M. Kim, S. Yoo, and Y. B. Park, "Effects of surface finishes and current stressing on the interfacial reaction characteristics of Sn-1.2Ag-0.7Cu-0.4In solder bumps", Curr. Appl. Phys., 13(2), S103 (2013). https://doi.org/10.1016/j.cap.2013.01.002
- T.-Y. Lee, M.-S. Kim, E.-S. Ko, J.-H. Choi, M.-G. Jang, M.- S. Kim, and S. H. Yoo, "Properties of High Power Flip Chip LED Package with Bonding Materials", J. Microelectron. Packag. Soc., 21(1), 1 (2014). https://doi.org/10.6117/kmeps.2014.21.1.001
- W. Seo, K. H. Kim, J. H. Bang, M. S. Kim, and S. Yoo, "Effect of Bath Life of Ni(P) on the Brittle-Fracture Behavior of Sn-3.0Ag-0.5Cu/ENIG", J. Electron. Mater., 43(12), 4457 (2014). https://doi.org/10.1007/s11664-014-3395-8
- H. Lee, J. Jung, C. Heo, C. Kim, J. H. Lee, and Y. Kim, "Characterization of the Contamination Factor of Electroless Ni Plating Solutions on the ENIG Process", J. Electron. Mater., 47(9), 5158 (2018). https://doi.org/10.1007/s11664-018-6335-1
- M. O. Alam, Y. C. Chan, and K. C. Hung, "Reliability study of the electroless Ni-P layer against solder alloy", Microelectronics Reliability, 42(7), 1065 (2002). https://doi.org/10.1016/S0026-2714(02)00068-9
- W. Seo, K. H. Kim, Y. H. Kim, and S. Yoo, "Effect of Ni-P Plating Temperature on Growth of Interfacial Intermetallic Compound in Electroless Nickel Immersion Gold/Sn-Ag-Cu Solder Joints", J. Electron. Mater., 47(1), 110 (2018).
- K. Kim, W. Seo, S.-H. Kwon, J.-K. Kim, J.-W. Yoon, and S. Yoo, "Effects of Ni-P Bath on the Brittle Fracture of Sn-Ag-Cu Solder/ENEPIG Solder Joint", Journal of Welding and Joining, 35(3), 1 (2017).
- D. J. Lee and H. S. Lee, "Major factors to the solder joint strength of ENIG layer in FC BGA package", Microelectron. Reliab., 46(7), 1119 (2006). https://doi.org/10.1016/j.microrel.2005.08.006
- Y.-C. Sohn and J. Yu, "Correlation between Interfacial Reaction and Brittle Fracture Found in", J. Microelectron. Packag. Soc., 12(1), 41 (2005).
- H. Lee, S. Lee, K. Kim, C. Heo, J. H. Lee, and Y. Kim, "Investigation of surface defects of electroless Ni plating by solder resist dissolution on the ENIG process", Microelectron. Eng., 200, 39 (2018). https://doi.org/10.1016/j.mee.2018.06.001
- B. K. Kim, S.-J. Lee, J.-Y. Kim, K.-Y. Ji, Y.-J. Yoon, M.-Y. Kim, S.-H. Park, and J.-S. Yoo, "Origin of surface defects in PCB final finishes by the electroless nickel immersion gold process", J. Electron. Mater., 37(4), 527 (2008). https://doi.org/10.1007/s11664-007-0360-9
- J. Osenbach, A. Amin, F. Baiocchi, and J. Delucca, "ENIG corrosion induced by second-phase precipitation", J. Electron. Mater., 38(12), 2592 (2009). https://doi.org/10.1007/s11664-009-0938-5
- Y. C. Sohn and J. Yu, "Correlation between chemical reaction and brittle fracture found in electroless Ni(P)/immersion goldsolder interconnection", J. Mater. Res., 20(8), 1931 (2005). https://doi.org/10.1557/JMR.2005.0246
- M. O. Alam and Y. C. Chan, "Effect of reaction time and P content on mechanical strength of the interface formed between eutectic Sn-Ag solder and Au/electroless Ni (P)/Cu bond pad", 94(6), 4108 (2003). https://doi.org/10.1063/1.1602563
- J. W. Yoon, J. H. Park, C. C. Shur, and S. B. Jung, "Characteristic evaluation of electroless nickel-phosphorus deposits with different phosphorus contents", Microelectron. Eng., 84(11), 2552 (2007). https://doi.org/10.1016/j.mee.2007.05.057
- I. Baskaran, T. S. N. S. Narayanan, and A. Stephen, "Effect of accelerators and stabilizers on the formation and characteristics of electroless Ni-P deposits", Mater. Chem. Phys., 99(1), 117 (2006). https://doi.org/10.1016/j.matchemphys.2005.10.001
- T. Hentschel, D. Isheim, R. Kirchheim, F. Muller, and H. Kreye, "Nanocrystalline Ni-3.6 at.% P and its transformation sequence studied by atom-probe field-ion microscopy", Acta Mater., 48(4), 933 (2000). https://doi.org/10.1016/S1359-6454(99)00371-7
- K. Pun and C. Q. Cui, "Enhancement of TBGA substrate in packing drop test", Proc. 2009 International Conference on Electronic Packaging Technology & High Density Packaging (ICEPT-HDP) Beijing, China, 2, 1097 (2009).