References
- The Korea Occupational Safety and Health Agency (KOSHA), "A Study on the Safety Work of Gondola", 2006-122-827, p.1, pp. 58-65, 2006.
- J. S. Kim and Y. H. Hong, "Development of the Safety Standard for Suspended Access Equipments", J. Korean Soc. Saf., Vol. 22, No. 5, p. 7, 2007.
- Ministry of Employment and Labor, "Notice on Safety Inspection Reduction", Ministry of Employment and Labor Notice 2017-54, 2017.
- The Korea Occupational Safety and Health Agency (KOSHA), "Falling While en Route to the Gondola Carrier" 2014-Education Media-740, 2014.
- Y. G. Han, K. W. Yeun, Y. W. Lee and J. Kim, "A Study for the Supporting Means of Exterior Walls Maintenance Gondola", Korean Society for Precision Engineering, pp. 1073-1074, 2012.
- C. W. Choi, S. P. Lee and K W. Kang, "Development of Fatigue Stress Spectrum and Fatigue Life Prediction of Endless Winder Sheave for Wind Turbine Lift using Finite Element Analysis", Journal of Renewable and Sustainable Energy 6, 042010, p. 3, 2014.
- The Korea Occupational Safety and Health Agency (KOSHA), "Gondora Work Safety Guide", Construction 2000-33-475, 2000.
- Ministry of Employment and Labor, "Notice of Safety Certification for Hazardous Machine Tools", Ministry of Employment and Labor Notice 2016-29, 2016.
- The Korea Occupational Safety and Health Agency (KOSHA), "Gondola Safety Work" 2011-Education Media-1635, 2001.
- The Korea Occupational Safety and Health Agency (KOSHA), "General Information System for Hazardous and Hazardous Machines and Apparatus", www.miis.kosha.or.kr, 2019.10.02.
- H. S. Byun, J. K. Rhim and W. B. Yang, "Reducing the Falling Accident due to the Removal of Safety Fence from Gondola", Journal of Korea Safety Management & Science, Vol. 21, No. 2, pp. 9-13, 2019. https://doi.org/10.12812/KSMS.2019.21.2.009
- Ministry of Employment and Labor, "An Analysis of Industrial Accidents in 2017", 2017.
- J. W. Jung, "A Study on the Implementation of Risk Assessment System at Workplace in Korea", J. Korean Soc. Saf., Vol. 29, No. 3, pp. 121-128, 2014. https://doi.org/10.14346/JKOSOS.2014.29.3.121
- C. H. Tae, H. S. Lee, C. H. Byun, J. M. Yang, C. H. Park and J. W. Ko, "A Study on Risk Analysis of Manufacturing Process Using the Bow-Tie Method", Journal of the Korean Institute of Gas, Vol. 17, No. 3, pp. 33-38, 2013. https://doi.org/10.7842/kigas.2013.17.3.33
- The Korea Occupational Safety and Health Agency (KOSHA), "Guideline for Semi-quantitative Bow-Tai Risk Assessment" KOSHA GUIDE X-40-2011, 2011
- BowTieXP, "CGE Risk Management Solutions", http://www.cgerisk.com, 2019.10.02.
- K. S. Son, "An Experimental Study on the Correlationship Betwwen Highrised Safetygurad and Workers' Safety", J. Korean Soc. Saf., Vol. 16, No. 2, pp. 80-84, 2001.
- The Korea Occupational Safety and Health Agency (KOSHA), "Gondola Safety and Health Work Instructions", KOSHA GUIDE C-62-2012, 2012.
- Ministry of Employment and Labor, "Education Contents by Target", Enforcement Rules of the Industrial Safety and Health Act Article 33 Annexes 8, 2019.
- D. H. Yun, J. Y. Park and J. H. Kee, "Measures to Reduce Tower Crane Accidents During Operation by Improving Signal System and Education for Signalmen", J. Korean Soc. Saf., Vol. 34, No. 4, pp. 68-75, 2019.
- Conference on Inspection and Coordination of State Affairs, "Comprehensive Measures to Prevent Falls in Construction Sites", p. 6, 2019.