참고문헌
- Simon Hradecky, "Accident: Southwest B737 near Philadelphia on Apr 17th 2018, uncontained engine failure takes out passenger window," The Aviation Herald, http://www.avherald.com/
- D. D. Le, "Evaluation of light weight material concepts for aircraft turbine engine rotor failure protection," Federal Aviation Administration, DOT/FAA/AR-96/110, 1997.
- http://www.avherald.com/
- B. Rideley, "Impact studies of containment ring during blade shed in turbofan engine," Department of Mechanical and Industrial Engineering University of Torronto, 2018.
- H. J. Xuan, X. Lu, W. R. Hong and L. F. Liao, "Review of aero-engine case containment research," Journal of Aerospace Power, Vol. 8, pp. 1860-1870, 2010.
- https://www.rolls-royce.com/products-and-services/civil-aerospace/airlines/trent-900.aspx#section-technology
- https://www.geaviation.com/commercial/engines/genx-engine
- Federal Aviation Regulation Part 33, Federal Aviation Administration, 1984.
- Certification Specification for Engines CS-E, European Aviation Safety Agency, 2007
- Advisory Circular AC 33-5, Federal Aviation Administration, 1990
- Husband Jason Burkley, "Developing an efficient FEM structural simulation of a fan blade off test in a turbofan jet engine," PhD Thesis, University of Sakatchewan, 2007.
- J. Heady, J. M. Pereira and C. Ruggeri, "Establishing a ballistic test methodology for documenting the containment capability small gas turbine engine compressors," NASA Glenn Research Center, 2009
- Vander Klok, Andrew Joe. Experimental impact testing and analysis of composite fan cases. Michigan State University, 2016.
- Qing He, haijun Xuan, Lulu Liu, Weirong hong and Rongren Wu, “Perforation of aero-engine fan casing by a single rotating blade,” Aerospace Science and Technology, Vol. 25, No. 1, pp. 234-241, 2011. https://doi.org/10.1016/j.ast.2012.01.010
- He, Qing, et al. "Simulation methodology development for rotating blade containment analysis." Journal of Zhejiang University SCIENCE A 13.4, pp. 239-259, 2012
- C. O. Gunderson, "Study to improve airframe turbine engine rotor blade containment," Federal Aviation Administration, Report No.: FAA-RD-77-44, 1977
- K. F. Heermann, K. R. McClure and R. H. Eriksson, "Study to improve turbine engine rotor blade containment," Report No.: DOT-FAA-RD-77-100, Federal Aviation Administration, 1977
- J. J. M. Payen, "Containment of turbine engine fan blade," SNECMA, 6th International Symposium on Air Breathing Engines, AIAA, Symposium papers A83-35801, 16-07, 1983
- Sarkar, S., and S. N. Atluri. "Effects of multiple blade interaction on the containment of blade fragments during a rotor failure." Finite Elements in Analysis and Design 23.2-4 pp. 211-223, 1996. https://doi.org/10.1016/S0168-874X(96)80008-4
- Roberts, Gary D., et al. "Impact testing and analysis of composites for aircraft engine fan cases." Journal of Aerospace Engineering 15.3 pp. 104-110 2002. https://doi.org/10.1061/(ASCE)0893-1321(2002)15:3(104)
- Shmotin, Yuri, et al. "Numerical analysis of aircraft engine fan blade-out." 42nd AIAA/ASME/SAE/ASEE Joint Propulsion Conference & Exhibit. 2006.
- J. A. Mathis, "Design procedures and analysis of turbine rotor fragment hazard containment," Federal Aviation Administration, Report No.: DOT-FAA-AR-10-23-P1, 1997.
- D. A. Shockey, J. H. Giovanola and J. W. Simons, "Advanced armor technology: application potential for engine fragment barriers for commercial aircraft," Federal Aviation Administration, Report No.: DOT-FAA-AR-97-98, 1997
- A. D. Lane, "Development of an advanced fan blade containment system," Federal Aviation Administration, Report No.: DOT-FAA-RD-77-100, 1977.
- D. Le, "Evaluation of lightweight material concepts for aircraft turbine engine rotor failure protection," Federal Aviation Administration, Report No.: DOT-FAA-AR-96-110, 1997
- C. L. Stotler and A. P. Coppa, "Containment of composite fan blades," Report No.: NASA-CR-159544, 1979.
- Sharda, J., et al. "Modeling of multilayer composite fabrics for gas turbine engine containment systems." Journal of Aerospace Engineering 19.1 (2006): 38-45. https://doi.org/10.1061/(ASCE)0893-1321(2006)19:1(38)
- Naik, D., et al. "Development of reliable modeling methodologies for fan blade out containment analysis -Part I: Experimental studies." International Journal of Impact Engineering 36.1, pp. 1-11, 2009. https://doi.org/10.1016/j.ijimpeng.2008.03.007
- Stahlecker, Z., et al. "Development of reliable modeling methodologies for engine fan blade out containment analysis. Part II: Finite element analysis." International Journal of Impact Engineering 36.3 pp. 447-459, 2009. https://doi.org/10.1016/j.ijimpeng.2008.08.004
- He, Q., Xie, Z., Xuan, H., Liu, L., & Hong, W. "Multi-blade effects on aero-engine blade containment." Aerospace Science and Technology, 49, pp. 101-111. 2016 https://doi.org/10.1016/j.ast.2015.11.037
- He, Z., Xuan, H., Bai, C., Hu, Y., Cong, P., Bai, H., & Hong, W. "Containment tests and analysis of soft wall casing fabricated by wrapping Kevlar fabric around thin metal ring." Aerospace Science and Technology, 61, pp. 35-44, 2017. https://doi.org/10.1016/j.ast.2016.11.018
- Lulu, L. I. U., Zhenhua, Z. H. A. O., Wei, C. H. E. N., & Gang, L. U. O. "Influence of pre-tension on ballistic impact performance of multi-layer Kevlar 49 woven fabrics for gas turbine engine containment systems." Chinese Journal of Aeronautics, 31(6), pp. 1273-1286, 2018. https://doi.org/10.1016/j.cja.2018.03.021
- Zekan, H. E., Haijun, X. U. A. N., Conger, B. A. I., Manli, S. O. N. G., & Zhuoshen, Z. H. U. "Containment of soft wall casing wrapped with Kevlar fabric." Chinese Journal of Aeronautics, 32(4), pp. 954-966, 2019. https://doi.org/10.1016/j.cja.2019.01.008
- S. D. Rajan, B. Mobasher and Z. Stahlecker, "Explicit finite element modeling of multilayer composite fabric for gas turbine engine containment systems phase 3," part 1: Arizona State University Material Model and Numerical Simulation, Federal Aviation Administration, Report No.: DOT-FAA-AR-10-23-P1, 2011.
- K. S. Carney, J. M. Pereira, D. M. Revilock and P. Matheny, "Jet engine fan blade containment using an alternate geometry," International Journal of Impact Engineering, Vol. 36, pp. 720-728, 2009. https://doi.org/10.1016/j.ijimpeng.2008.10.002