References
- NREL, Best Research-Cell Efficiency Chart, https://www.nrel.gov/pv/cell-efficiency.html (accessed: April 2020).
- Correa-Baena, J. P. et al. Promises and challenges of perovskite solar cells. Science, 358, 739-744, doi:10.1126/science.aam6323 (2017).
- Park, I. J. et al. New Hybrid Hole Extraction Layer of Perovskite Solar Cells with a Planar p-i-n Geometry. J. Phys. Chem. C, 119, 27285-27290, doi:10.1021/acs.jpcc.5b09322 (2015).
- Xie, F. et al. Vertical recrystallization for highly efficient and stable formamidiniumbased inverted-structure perovskite solar cells. Energy Environ. Sci., 10, 1942-1949, doi:10.1039/C7EE01675A (2017).
- Wu, Y. et al. Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm(2) achieved by Additive Engineering. Adv. Mater,. (Deerfield Beach, Fla.) 29, doi:10.1002/adma.201701073 (2017).
- Chen, W. et al. Efficient and stable largearea perovskite solar cells with inorganic charge extraction layers. Science, 350, 944, doi:10.1126/science.aad1015 (2015).
- Park, I. J. et al. Highly Efficient and Uniform 1 cm2 Perovskite Solar Cells with an Electrochemically Deposited NiOx Hole-Extraction Layer. ChemSusChem, 10, 2660-2667, doi:10.1002/cssc.201700612 (2017).
- Yan, X. et al. Optimization of sputtering NiOx films for perovskite solar cell applications. Mater. Res. Bull., 103, 150-157, doi:10.1016/j.materresbull.2018.03.027 (2018).
- Pae, S. R. et al. Improving Uniformity and Reproducibility of Hybrid Perovskite Solar Cells via a Low-Temperature Vacuum Deposition Process for NiOx Hole Transport Layers. ACS Appl. Mater. Interfaces, 10, 534-540, doi:10.1021/acsami.7b14499 (2018).
- Abzieher, T. et al. Electron-Beam-Evaporated Nickel Oxide Hole Transport Layers for Perovskite-Based Photovoltaics. Adv. Energy Mater., 9, 1802995, doi:10.1002/aenm.201802995 (2019).
- Seo, S. et al. An ultra-thin, un-doped NiO hole transporting layer of highly efficient (16.4%) organic-inorganic hybrid perovskite solar cells. Nanoscale 8, 11403-11412, doi:10.1039/C6NR01601D (2016).
-
Seo, S., Jeong, S., Bae, C., Park, N.-G. & Shin, H. Perovskite Solar Cells with Inorganic Electron- and Hole-Transport Layers Exhibiting Long-Term (
${\approx}500h$ ) Stability at$85^{\circ}C$ under Continuous 1 Sun Illumination in Ambient Air. Adv. Mater., 30, 1801010, doi:10.1002/adma.201801010 (2018). - Heo, J. H., Han, H. J., Kim, D., Ahn, T. K. & Im, S. H. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency. Energy Environ. Sci., 8, 1602-1608, doi:10.1039/C5EE00120J (2015).
- Jorgensen, M., Norrman, K. & Krebs, F. C. Stability/degradation of polymer solar cells. Sol. Energy Mater. Sol. Cells, 92, 686-714, doi:https://doi.org/10.1016/j.solmat.2008.01.005 (2008).
- Kim, J. H. et al. High-performance and environmentally stable planar heterojunction perovskite solar cells based on a solutionprocessed copper-doped nickel oxide holetransporting layer. Adv. Mater., 27, 695-701, doi:10.1002/adma.201404189 (2015).
- Jung, J. W., Chueh, C. C. & Jen, A. K. A Low-Temperature, Solution-Processable, Cu-Doped Nickel Oxide Hole-Transporting Layer via the Combustion Method for High-Performance Thin-Film Perovskite Solar Cells. Adv. Mater., 27, 7874-7880, doi:10.1002/adma.201503298 (2015).
- Xie, Y. et al. Enhancing Photovoltaic Performance of Inverted Planar Perovskite Solar Cells by Cobalt-Doped Nickel Oxide Hole Transport Layer. ACS Appl. Mater. Interfaces, 10, 14153-14159, doi: 10.1021/acsami.8b01683 (2018).
- Chen, W. et al. Cesium Doped NiOx as an Efficient Hole Extraction Layer for Inverted Planar Perovskite Solar Cells. Adv. Energy Mater., 7, 1700722, doi:10.1002/aenm.201700722 (2017).
- Wei, Y. et al. Improving the efficiency and environmental stability of inverted planar perovskite solar cells via silver-doped nickel oxide hole-transporting layer. Appl. Surf. Sci., 427, 782-790, doi:https://doi.org/10.1016/j.apsusc.2017.08.184 (2018).
- Li, G. et al. Overcoming the Limitations of Sputtered Nickel Oxide for High-Efficiency and Large-Area Perovskite Solar Cells. Adv. Sci., (Weinh) 4, 1700463, doi:10.1002/advs.201700463 (2017).
- Chen, W. et al. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers. Science, 350, 944-948, doi:10.1126/science.aad1015 (2015).
- Qiu, Z. et al. Enhanced physical properties of pulsed laser deposited NiO films via annealing and lithium doping for improving perovskite solar cell efficiency. J. Mater. Chem. C, 5, 7084-7094, doi:10.1039/C7TC01224A (2017).
- Cao, J. et al. Low-temperature solutionprocessed NiOx films for air-stable perovskite solar cells. J. Mater. Chem. A, 5, 11071-11077, doi:10.1039/C7TA02228J (2017).
- Liu, Z. et al. Nickel oxide nanoparticles for efficient hole transport in p-i-n and n-i-p perovskite solar cells. J. Mater. Chem. A, 5, 6597-6605, doi:10.1039/C7TA01593C (2017).
- Li, R. et al. NiOx/Spiro Hole Transport Bilayers for Stable Perovskite Solar Cells with Efficiency Exceeding 21%. ACS Energy Lett., 5, 79-86, doi:10.1021/acsenergylett.9b02112 (2020).
- Park, I. J. et al. Highly Efficient and Uniform 1 cm(2) Perovskite Solar Cells with an Electrochemically Deposited NiOx Hole-Extraction Layer. ChemSusChem, 10, 2660-2667, doi:10.1002/cssc.201700612 (2017).
- He, J. et al. Ligand-Free, Highly Dispersed NiOx Nanocrystal for Efficient, Stable, Low-Temperature Processable Perovskite Solar Cells. Sol. RRL, 2, 1800004, doi:10.1002/solr.201800004 (2018).
- Tirado, J. et al. Air-Stable n-i-p Planar Perovskite Solar Cells Using Nickel Oxide Nanocrystals as Sole Hole-Transporting Material. ACS Appl. Energy Mater., 2, 4890-4899, doi:10.1021/acsaem.9b00603 (2019).
- Jaffe, J. E. et al. Electronic and Defect Structures of CuSCN. J. Phys. Chem. C, 114, 9111-9117, doi:10.1021/jp101586q (2010).
- Qin, P. et al. Inorganic hole conductor-based lead halide perovskite solar cells with 12.4% conversion efficiency. Nat. Commun., 5, 3834, doi:10.1038/ncomms4834 (2014).
- Ye, S. et al. CuSCN-Based Inverted Planar Perovskite Solar Cell with an Average PCE of 15.6%. Nano Lett., 15, 3723-3728, doi:10.1021/acs.nanolett.5b00116 (2015).
- Wijeyasinghe, N. et al. Copper(I) Thiocyanate (CuSCN) Hole-Transport Layers Processed from Aqueous Precursor Solutions and Their Application in Thin-Film Transistors and Highly Efficient Organic and Organometal Halide Perovskite Solar Cells. Adv. Funct. Mater., 27, 1701818, doi:10.1002/adfm.201701818 (2017).
- Liu, J. et al. Identification and Mitigation of a Critical Interfacial Instability in Perovskite Solar Cells Employing Copper Thiocyanate Hole-Transporter. Adv. Mater. Interfaces, 3, 1600571, doi:10.1002/admi.201600571 (2016).
- Jung, M. et al. Thermal Stability of CuSCN Hole Conductor-Based Perovskite Solar Cells. ChemSusChem, 9, 2592-2596, doi:10.1002/cssc.201600957 (2016).
- Arora, N. et al. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%. Science, 358, 768, doi:10.1126/science.aam5655 (2017).
- Zuo, C. & Ding, L. Solution-Processed Cu2O and CuO as Hole Transport Materials for Efficient Perovskite Solar Cells. Small, 11, 5528-5532, doi:10.1002/smll.201501330 (2015).
- Li, B. S., Akimoto, K. & Shen, A. Growth of Cu2O thin films with high hole mobility by introducing a low-temperature buffer layer. J. Cryst. Growth, 311, 1102-1105, doi:https://doi.org/10.1016/j.jcrysgro.2008.11.038 (2009).
- Rao, H. et al. A 19.0% efficiency achieved in CuOx-based inverted CH3NH3PbI3-xClx solar cells by an effective Cl doping method. Nano Energy, 27, 51-57, doi:https://doi.org/10.1016/j.nanoen.2016.06.044 (2016).
- Sun, W. et al. High-performance inverted planar heterojunction perovskite solar cells based on a solution-processed CuOx hole transport layer. Nanoscale, 8, 10806-10813, doi:10.1039/C6NR01927G (2016).
- Wong, K. S. T., Zhuk, S., Masudy-Panah, S. & Dalapati, K. G. Current Status and Future Prospects of Copper Oxide Heterojunction Solar Cells. Materials, 9, doi:10.3390/ma9040271 (2016).
- Guo, Y., Lei, H., Xiong, L., Li, B. & Fang, G. An integrated organic-inorganic hole transport layer for efficient and stable perovskite solar cells. J. Mater. Chem. A, 6, 2157-2165, doi:10.1039/C7TA09946K (2018).
- Nejand, B. A., Ahmadi, V., Gharibzadeh, S. & Shahverdi, H. R. Cuprous Oxide as a Potential Low-Cost Hole-Transport Material for Stable Perovskite Solar Cells. ChemSusChem, 9, 302-313, doi:10.1002/cssc.201501273 (2016).
- Han, G. et al. Nitrogen doped cuprous oxide as low cost hole-transporting material for perovskite solar cells. Scr. Mater., 153, 104-108, doi:https://doi.org/10.1016/j.scriptamat.2018.04.049 (2018).
- Akin, S. et al. Hydrothermally processed CuCrO2 nanoparticles as an inorganic hole transporting material for low-cost perovskite solar cells with superior stability. J. Mater. Chem. A, 6, 20327-20337, doi:10.1039/C8TA07368F (2018).
- Qin, P.-L. et al. High-Performance Rigid and Flexible Perovskite Solar Cells with Low-Temperature Solution-Processable Binary Metal Oxide Hole-Transporting Materials. Sol. RRL, 1, 1700058, doi:10.1002/solr.201700058 (2017).
- Chen, Y. et al. Thermal lystable methylammonium-free inverted perovskite solar cells with Zn2+ doped CuGaO2 as efficient mesoporous hole-transporting layer. Nano Energy, 61, doi:10.1016/j.nanoen.2019.04.042 (2019).
- Zhang, H. et al. Low-Temperature Solution-Processed CuCrO2 Hole-Transporting Layer for Efficient and Photostable Perovskite Solar Cells. Adv. Energy Mater., 8, 1702762, doi:10.1002/aenm.201702762 (2018).
- Yang, B. et al. Multifunctional Synthesis Approach of In:CuCrO2 Nanoparticles for Hole Transport Layer in High-Performance Perovskite Solar Cells. Adv. Funct. Mater., 29, 1902600, doi:10.1002/adfm.201902600 (2019).
-
Chen, Y. et al. Thermallystable methylammonium-free inverted perovskite solar cells with
$Zn^{2+}$ doped CuGaO2 as efficient mesoporous hole-transporting layer. Nano Energy, 61, 148-157, doi:https://doi.org/10.1016/j.nanoen.2019.04.042 (2019). - Zhang, H., Wang, H., Chen, W. & Jen, A. K. Y. CuGaO2: A Promising Inorganic Hole-Transporting Material for Highly Efficient and Stable Perovskite Solar Cells. Adv. Mater., 29, 1604984, doi:10.1002/adma.201604984 (2017).
- Tseng, Z. L. et al. Efficient inverted-type perovskite solar cells using UV-ozone treated MoOx and WOx as hole transporting layers. Sol. Energy, 139, 484-488, doi:10.1016/j.solener.2016.10.005 (2016).
- Yang, Y. et al. Enormously improved CH3NH3PbI3 film surface for environmentally stable planar perovskite solar cells with PCE exceeding 19.9%. Nano Energy, 48, 10-19, doi: https://doi.org/10.1016/j.nanoen.2018.03.046 (2018).
- Sanehira, E. M. et al. Influence of Electrode Interfaces on the Stability of Perovskite Solar Cells: Reduced Degradation Using MoOx/Al for Hole Collection. ACS Energy Lett., 1, 38-45, doi:10.1021/acsenergylett.6b00013 (2016).
- Lee, K.-M. et al. Highly efficient and stable semi-transparent perovskite solar modules with a trilayer anode electrode. Nanoscale, 10, 17699-17704, doi:10.1039/C8NR06095A (2018).
- Sun, H. et al. Low-temperature solutionprocessed p-type vanadium oxide for perovskite solar cells. Chem. Commun., 52, 8099-8102, doi:10.1039/C6CC03740B (2016).
- Guo, Q. et al. Low-temperature solutionprocessed vanadium oxide as hole transport layer for efficient and stable perovskite solar cells. Phys. Chem. Chem. Phys., 20, 21746-21754, doi:10.1039/c8cp03223h (2018).
- Chu, S. et al. Atomic-layer-deposited ultrathin VOx film as a hole transport layer for perovskite solar cells. Semicond. Sci. Technol., 33, 115016, doi:10.1088/1361-6641/aae071 (2018).
- Raiford, J. A. et al. Atomic layer deposition of vanadium oxide to reduce parasitic absorption and improve stability in n-i-p perovskite solar cells for tandems. Sustainable Energy Fuels, 3, 1517-1525, doi:10.1039/C9SE00081J (2019).
- Yang, W. S. et al. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange. Science, 348, 1234, doi:10.1126/science.aaa9272 (2015).
- Jung, E. H. et al. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene). Nature, 567, 511-515, doi:10.1038/s41586-019-1036-3 (2019).
- Jeon, N. J. et al. A fluorene-terminated holetransporting material for highly efficient and stable perovskite solar cells. Nat. Energy, 3, 682-689, doi:10.1038/s41560-018-0200-6 (2018).
- Saliba, M. et al. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance. Science, 354, 206, doi:10.1126/science.aah5557 (2016).
- Tan, H. et al. Efficient and stable solutionprocessed planar perovskite solar cells via contact passivation. Science 355, 722, doi:10.1126/science.aai9081 (2017).
-
Leijtens, T. et al. Overcoming ultraviolet light instability of sensitized
$TiO_2$ with mesosuperstructured organometal tri-halide perovskite solar cells. Nat. Commun., 4, 2885, doi:10.1038/ncomms3885 (2013). - Pathak, S. K. et al. Performance and Stability Enhancement of Dye-Sensitized and Perovskite Solar Cells by Al Doping of TiO2. Adv. Funct. Mater. 24, 6046-6055, doi:10.1002/adfm.201401658 (2014).
- Roose, B. et al. Enhanced Efficiency and Stability of Perovskite Solar Cells Through Nd-Doping of Mesostructured TiO2. Adv. Funct. Mater., 6, 1501868, doi:10.1002/aenm.201501868 (2016).
- Chen, T.-P. et al. Self-Assembly Atomic Stacking Transport Layer of 2D Layered Titania for Perovskite Solar Cells with Extended UV Stability. Adv. Energy Mater., 8, 1701722, doi:10.1002/aenm.201701722 (2018).
- Zhang, Y. et al. Dopamine-crosslinked TiO2/perovskite layer for efficient and photostable perovskite solar cells under full spectral continuous illumination. Nano Energy, 56, 733-740, doi:https://doi.org/10.1016/j.nanoen.2018.11.068 (2019).
- Hu, W. et al. Low-Temperature In Situ Amino Functionalization of TiO2 Nanoparticles Sharpens Electron Management Achieving over 21% Efficient Planar Perovskite Solar Cells. Adv. Mater., 31, 1806095, doi:10.1002/adma.201806095 (2019).
- Chen, H. et al. Efficient Bifacial Passivation with Crosslinked Thioctic Acid for High-Performance Methylammonium Lead Iodide Perovskite Solar Cells. Adv. Mater., 32, 1905661, doi:10.1002/adma.201905661 (2020).
- Zhu, L. F. et al. Efficient perovskite solar cells via simple interfacial modification toward a mesoporous TiO2 electron transportation layer. RSC Adv., 6, 82282-82288, doi:10.1039/C6RA16839F (2016).
- Fan, L. et al. Novel insight into the function of PC61BM in efficient planar perovskite solar cells. Nano Energy, 27, 561-568, doi:https://doi.org/10.1016/j.nanoen.2016.08.001 (2016).
- You, S. et al. A Biopolymer Heparin Sodium Interlayer Anchoring TiO2 and MAPbI3 Enhances Trap Passivation and Device Stability in Perovskite Solar Cells. Adv. Mater., 30, e1706924, doi:10.1002/adma.201706924 (2018).
- Li, Y. et al. Multifunctional Fullerene Derivative for Interface Engineering in Perovskite Solar Cells. J. Am. Chem. Soc., 137, 15540-15547, doi:10.1021/jacs.5b10614 (2015).
- Hailegnaw, B. et al. Inverted (p-i-n) perovskite solar cells using a low temperature processed TiOx interlayer. RSC Adv., 8, 24836-24846, doi:10.1039/C8RA03993C (2018).
- Lv, Y. et al. Low-Temperature Atomic Layer Deposition of Metal Oxide Layers for Perovskite Solar Cells with High Efficiency and Stability under Harsh Environmental Conditions. ACS Appl. Mater. Interfaces, 10, 23928-23937, doi:10.1021/acsami.8b07346 (2018).
- Jiang, Q., Zhang, X. & You, J. SnO2: A Wonderful Electron Transport Layer for Perovskite Solar Cells. Small, 14, 1801154, doi:10.1002/smll.201801154 (2018).
- Lee, J. - W. et al. Tuning Molecular Interactions for Highly Reproducible and Efficient Formamidinium Perovskite Solar Cells via Adduct Approach. J. Am. Chem. Soc., 140, 6317-6324, doi:10.1021/jacs.8b01037 (2018).
- Abuhelaiqa, M. et al. Stable perovskite solar cells using tin acetylacetonate based electron transporting layers. Energy Environ. Sci., 12, 1910-1917, doi:10.1039/C9EE00453J (2019).
- Jiang, Q. et al. Enhanced electron extraction using SnO < SUB > 2 < / SUB > for high -efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells. Nat. Energy, 2, 16177 (2017). https://doi.org/10.1038/nenergy.2016.177
- Yang, D. et al. High efficiency planar-type perovskite solar cells with negligible hysteresis using EDTA-complexed SnO2. Nat. Commun., 9, 3239, doi:10.1038/s41467-018-05760-x (2018).
- Anaraki, E. H. et al. Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide. Energy Environ. Sci., 9, 3128-3134, doi:10.1039/C6EE02390H (2016).
- Lee, Y. et al. Efficient Planar Perovskite Solar Cells Using Passivated Tin Oxide as an Electron Transport Layer. Adv. Sci., 5, 1800130, doi:10.1002/advs.201800130 (2018).
- Jiang, Q. et al. Surface passivation of perovskite film for efficient solar cells. Nat. Photonics, 13, 460-466, doi:10.1038/s41566-019-0398-2 (2019).
- Christians, J. A. et al. Tailored interfaces of unencapsulated perovskite solar cells for >1,000 hour operational stability. Nat. Energy , 3, 68-74, doi:10.1038/s41560-017-0067-y (2018).
- Wang, L. et al. A Eu3+-Eu2+ ion redox shuttle imparts operational durability to Pb-I perovskite solar cells. Science, 363, 265, doi:10.1126/science.aau5701 (2019).
- Wang, R. et al. Caffeine Improves the Performance and Thermal Stability of Perovskite Solar Cells. Joule, 3, 1464-1477, doi : https://doi.org/10.1016/j.joule.2019.04.005 (2019).
- Cao, T. et al. Fullerene Derivative-Modified SnO2 Electron Transport Layer for Highly Efficient Perovskite Solar Cells with Efficiency over 21%. ACS Appl. Mater. Interfaces, 11, 33825-33834, doi:10.1021/acsami.9b09238 (2019).
- Wang, J., Datta, K., Weijtens, C. H. L., Wienk, M. M. & Janssen, R. A. J. Insights into Fullerene Passivation of SnO2 Electron Transport Layers in Perovskite Solar Cells. Adv. Funct. Mater., 29, 1905883, doi:10.1002/adfm.201905883 (2019).
- Hill, R. B. M. et al. Phosphonic Acid Modification of the Electron Selective Contact: Interfacial Effects in Perovskite Solar Cells. ACS Appl. Energy Mater., 2, 2402-2408, doi:10.1021/acsaem.9b00141 (2019).
- Hou, M. et al. Enhancing Efficiency and Stability of Perovskite Solar Cells via a Self-Assembled Dopamine Interfacial Layer. ACS Appl. Mater. Interfaces, 10, 30607-30613, doi:10.1021/acsami.8b10332 (2018).
- Zuo, L. et al. Tailoring the Interfacial Chemical Interaction for High-Efficiency Perovskite Solar Cells. Nano Lett., 17, 269-275, doi:10.1021/acs.nanolett.6b04015 (2017).
- Tu, B. et al. Novel Molecular Doping Mechanism for n-Doping of SnO2 via Triphenylphosphine Oxide and Its Effect on Perovskite Solar Cells. Adv. Mater., 31, 1805944, doi:10.1002/adma.201805944 (2019).
- Park, S. Y. et al. Simultaneous Ligand Exchange Fabrication of Flexible Perovskite Solar Cells using Newly Synthesized Uniform Tin Oxide Quantum Dots. J. Phys..Chem. Lett., 9, 5460-5467, doi:10.1021/acs.jpclett.8b02408 (2018).
- Liu, C. et al. Hydrothermally Treated SnO2 as the Electron Transport Layer in High-Efficiency Flexible Perovskite Solar Cells with a Certificated Efficiency of 17.3%. Adv. Funct. Mater., 29, 1807604, doi:10.1002/adfm.201807604 (2019).
- Ai, Y. et al. SnO2 surface defects tuned by (NH4)2S for high-efficiency perovskite solar cells. Sol. Energy, 194, 541-547, doi:https://doi.org/10.1016/j.solener.2019.11.004 (2019).
- Jiang, E. et al. Phosphate-Passivated SnO2 Electron Transport Layer for High-Performance Perovskite Solar Cells. ACS Appl. Mater. Interfaces, 11, 36727-36734, doi:10.1021/acsami.9b11817 (2019).
- Luan, Y. et al. High-Performance Planar Perovskite Solar Cells with Negligible Hysteresis Using 2,2,2-Trifluoroethanol-Incorporated SnO2. iScience, 16, 433-441, doi:10.1016/j.isci.2019.06.004 (2019).
- Zhu, Z. et al. Enhanced Efficiency and Stability of Inverted Perovskite Solar Cells Using Highly Crystalline SnO2 Nanocrystals as the Robust Electron-Transporting Layer. Adv Mater., 28, 6478-6484, doi:10.1002/adma.201600619 (2016).
- Brinkmann, K. O. et al. Suppressed decomposition of organometal halide perovskites by impermeable electron-extraction layers in inverted solar cells. Nat. Commun., 8, 13938, doi:10.1038/ncomms13938 (2017).
- Hoffmann, L. et al. Spatial Atmospheric Pressure Atomic Layer Deposition of Tin Oxide as an Impermeable Electron Extraction Layer for Perovskite Solar Cells with Enhanced Thermal Stability. ACS Appl. Mater. Interfaces, 10, 6006-6013, doi:10.1021/acsami.7b17701 (2018).
- Shin, S. S. et al. Colloidally prepared La - doped BaSnO< ; sub & gt ; 3 & lt ; /sub> electrodes for efficient, photostable perovskite solar cells. Science, 356, 167, doi:10.1126/science.aam6620 (2017).
- You, J. et al. Improved air stability of perovskite solar cells via solution-processed metal oxide transport layers. Nat. Nanotechnol., 11, 75-81, doi:10.1038/nnano.2015.230 (2016).
- Jiang, T. & Fu, W. Improved performance and stability of perovskite solar cells with bilayer electron-transporting layers. RSC Adv., 8, 5897-5901, doi:10.1039/C8RA00248G (2018).
- Chiang, Y.-H. et al. Highly stable perovskite solar cells with all-inorganic selective contacts from microwave-synthesized oxide nanoparticles. J. Mater. Chem. A, 5, 25485-25493, doi:10.1039/C7TA07775K (2017).
- Fang, R. et al. [6,6]-Phenyl-C61-Butyric Acid Methyl Ester/Cerium Oxide Bilayer Structure as Efficient and Stable Electron Transport Layer for Inverted Perovskite