DOI QR코드

DOI QR Code

Flexural strengthening of RCC beams using FRPs and ferrocement - a comparative study

  • Ganesan, N. (Department of Civil Engineering, National Institute of Technology Calicut) ;
  • Bindurania, P. (Department of Civil Engineering, National Institute of Technology Calicut) ;
  • Indira, P.V. (Department of Civil Engineering, National Institute of Technology Calicut)
  • 투고 : 2020.01.23
  • 심사 : 2020.06.16
  • 발행 : 2020.07.25

초록

This paper deals with a comparative study among three different rehabilitation techniques, namely, (i) carbon fibre reinforced polymer (CFRP), (ii) glass fibre reinforced polymer (GFRP) and (iii) ferrocement on the flexural strengthening of reinforced cement concrete (RCC) beams. As these different techniques have to be compared on a level playing field, tensile coupon tests have been carried out initially for GFRP, CFRP and ferrocement and the number of layers required in each of these composites in terms of the tensile strength. It was found that for the selected constituents of the composites, one layer of CFRP was equivalent to three layers of GFRP and five layers of wiremesh reinforcement in ferrocement. Rehabilitation of RCC beams using these equivalent laminates shows that all the three composites performed in a similar way and are comparable. The parameters selected in this study were (i) the strengthening material and (ii) the level of pre-distress induced to the beams prior to the rehabilitation. It was noticed that, as the levels of pre-distress decreases, the percentage attainment of flexural capacity and flexural stiffness of the rehabilitated beams increases for all the three selected composites used for rehabilitation. Load-deflection behavior, failure modes, energy absorption capacity, displacement ductility and curvature ductility were compared among these composites and at different distress levels for each composite. The results indicate that ferrocement showed a better performance in terms of ductility than other FRPs, and between the FRPs, GFRP exhibited a better ductility than the CFRP counterpart.

키워드

과제정보

The authors would like to acknowledge the National Institute of Technology Calicut, Kerala, India for extending the facilities for the successful completion of this project.

참고문헌

  1. ACI 440.2R (2008), Guide for the Design and Construction of Externally Bonded FRP Systems for Strengthening Concrete Structures, American Concrete Institute, Farmington Hills, MI, USA.
  2. ACI 546R (2014), Guide to Concrete Repair, American Concrete Institute, Farmington Hills, MI, USA.
  3. ACI 549.1R-93 (1999), Guide for the Design, Construction, and Repair of Ferrocement, American Concrete Institute, Farmington Hills, MI, USA.
  4. Al-Kubaisy, M.A. and Jumaat, Z. (2000), "Ferrocement laminate strengthens RC beams", Concrete Int., 22(10), 37-43.
  5. Al-Salloum, Y.A. and Almusallam, T.H. (2003), "Rehabilitation of the infrastructure using composite materials: overview and applications", J. King Saud Uni.-Eng. Sci., 16(1), 1-20. https://doi.org/10.1016/s1018-3639(18)30777-3.
  6. Amran, Y.H.M., Alyousef, R., Rashid, R.S.M., Alabduljabbar, H. and Hung, C.C. (2018), "Properties and applications of FRP in strengthening RC structures: a review", Struct., 16, 208-238. https://doi.org/10.1016/j.istruc.2018.09.008.
  7. Aravind, N., Samanta, A.K., Roy, D.K.S. and Thanikal, J.V. (2013), "Retrofitting of reinforced concrete beams using fibre reinforced polymer (FRP) composites-a review", J. Urban. Environ. Eng., 7(1), 164-175. https://doi.org/10.4090/juee.2013.v7n1.164175.
  8. ASTM D3039/D3039M (2000), Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials, ASTM International, West Conshohocken, PA, USA.
  9. ASTM D7565/D7565M-10 (2017), Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures, ASTM International, West Conshohocken, PA, USA.
  10. Bakis, C.E., Bank, L.C., Brown, V.L., Cosenza, E., Davalos, J.F., Lesko, J.J., Machida, A., Rizkalla, S.H. and Triantafillou, T.C. (2002), "Fiber-reinforced polymer composites for construction-state-of-the-art review", J. Compos. Constr., 6(2), 73-87. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73).
  11. CERA CFR MEMBRANE 230 (2017), Unidirectional Carbon Fibre Reinforcement Membranes for Structural Strengthening; Cera-Chem Private Limited, Chennai, India.
  12. CERA PRIMER EP 18 (2013), High Performance Epoxy Primer for Fiber Wrapping, Cera-Chem Private Limited, Chennai, India.
  13. CERA PRIMER EP S (2013), High Performance Epoxy Saturant for Fiber Wrapping, Cera-Chem Private Limited, Chennai, India.
  14. Ebead, U. (2015), "Inexpensive strengthening technique for partially loaded reinforced concrete beams: experimental study", J. Mater. Civil Eng., 27(10), 04015002. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001249.
  15. Escrig, C., Gil, L. and Bernat-Maso, E. (2017), "Experimental comparison of reinforced concrete beams strengthened against bending with different types of cementitious-matrix composite materials", Constr. Build. Mater., 137, 317-329. https://dx.doi.org/10.1016/j.conbuildmat.2017.01.106.
  16. EW200 (200$\pm$20gsm) n.d., E-Glass Fiberglass Cloth/ Fabric/Woven Roving; viewed 06 May 2020, https://chinageomembrane.en.made-in-china.com/product/sXyJhQwrrIYF/China-E-Glass-Fiberglass-Cloth-Fabric-Woven-Roving.html.
  17. Ganesh, P. and Murthy, A.R. (2019), "Repair, retrofitting and rehabilitation techniques for strengthening of reinforced concrete beams - a review", Adv. Concrete Constr., 8(2), 101-117. https://doi.org/10.12989/acc.2019.8.2.101.
  18. ICRI 310.2R (2013), Selecting and Specifying Concrete Surface Preparation for Sealers, Coatings, and Polymer Overlays, and Concrete Repair, International Concrete Repair Institute, Rosemont, IL, USA.
  19. IS 10262 (2009), Concrete Mix Proportioning-Guidelines, Bureau of Indian Standards, New Delhi, India.
  20. IS 383 (2016), Coarse and Fine Aggregate for Concrete- Specification, Bureau of Indian Standards, New Delhi, India.
  21. IS 456 (2000), Plain and Reinforced Concrete-Code of Practice, Bureau of Indian Standards, New Delhi, India.
  22. Jayasree, S., Ganesan, N. and Abraham, R. (2016), "Effect of ferrocement jacketing on the flexural behaviour of beams with corroded reinforcements", Constr. Build. Mater., 121, 92-99. https://doi.org/10.1016/j.conbuildmat.2016.05.131.
  23. Kabir, M.I., Subhani, M., Shrestha, R. and Samali, B. (2018), "Experimental and theoretical analysis of severely damaged concrete beams strengthened with CFRP", Constr. Build. Mater., 178, 161-174. https://doi.org/10.1016/j.conbuildmat.2018.05.038.
  24. Khan, S.U., Rafeeqi, S.F.A. and Ayub, T. (2013), "Strengthening of RC beams in flexure using ferrocement", Iran. J. Sci. Tech.-Tran. Civil Eng., 37, 353-363.
  25. Kim, Y.J. and Harries, K.A. (2013), "Statistical characterization of reinforced concrete beams strengthened with FRP sheets", J. Compos. Constr., 17(3), 357-370. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000356.
  26. Masood, A., Arif, M., Akhtar, S. and Haquie, M. (2005), "Rehabilitation of RC and FRC beams by ferrocement- an experimental investigation", J. Struct. Eng., 31(4), 321-326.
  27. Naaman, A.E. (2012), "Evolution in ferrocement and thin reinforced cementitious composites", Arab. J. Sci. Eng., 37, 421-441. https://doi.org/10.1007/s13369-012-0187-4.
  28. Naser, M.Z., Hawileh, R.A. and Abdalla. J.A. (2019), "Fiber-reinforced polymer composites in strengthening reinforced concrete structures: a critical review", Eng. Struct., 198, 109542. https://doi.org/10.1016/j.engstruct.2019.109542.
  29. Nassif, H.H. and Najm, H. (2004), "Experimental and analytical investigation of ferrocement-concrete composite beams", Cement Concrete Compos., 26(7), 787-796. https://doi.org/10.1016/j.cemconcomp.2003.08.003.
  30. Nayak, A.N., Kumari, A. and Swain, R.B. (2018), "Strengthening of RC beams using externally bonded fibre reinforced polymer composites", Struct., 14, 137-152. https://doi.org/10.1016/j.istruc.2018.03.004.
  31. Patel, M.R., Tank, T.G., Vasanwala, S.A. and Modhera, C.D. (2015), "Assessment of debonding load for RC beam strengthened with pre-designed CFRP strip mechanism", Advances in Structural Engineering, Springer, New Delhi.
  32. Qeshta, I.M.I., Shafigh, P. and Jumaat, M.Z. (2015), "Flexural behaviour of RC beams strengthened with wire mesh-epoxy composite", Constr. Build. Mater., 79, 104-114. https://dx.doi.org/10.1016/j.conbuildmat.2015.01.013.
  33. Ritchie, P.A., Thomas, D.A., Lu, L. and Connelly, G.M. (1991), "External reinforcement of concrete beams using fibre reinforced plastics", ACI Struct. J., 88(4), 490-500. https://doi.org/10.14359/2723.
  34. Sarker, P., Begum, M. and Nasrin, S. (2011), "Fibre reinforced polymers for structural retrofitting: a review", J. Civil Eng. (IEB), 39(1), 49-57.
  35. Saxena, P., Toutanji, H. and Noumowe, A. (2008), "Failure analysis of FRP-strengthened RC beams", J. Compos. Constr., ASCE, 12(1), 2-14. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:1(2).
  36. Siddika, A., Al-Mamun, M.A., Ferdous, W. and Alyousef, R. (2020), "Performances, challenges and opportunities in strengthening reinforced concrete structures by using FRPs - a state-of-the-art review", Eng. Fail. Anal., 111, 104480. https://doi.org/10.1016/j.engfailanal.2020.104480.
  37. Sumathi, A. and Arun, V.S. (2017), "Study on behavior of RCC beams with externally bonded FRP members in flexure", Adv. Concrete Constr., 5(6), 625-638. https://doi.org/10.12989/acc.2017.5.6.625.
  38. Sun, W., Peng, X., Liu, H. and Qi, H. (2017), "Numerical studies on the entire debonding propagation process of FRP strips externally bonded to the concrete substrate", Constr. Build. Mater., 149, 218-235. https://doi.org/10.1016/j.conbuildmat.2017.05.117.
  39. Tahsiri, H., Sedehi, O., Khaloo, A. and Raisi, E.M. (2015), "Experimental study of RC jacketed and CFRP strengthened RC beams", Constr. Build. Mater., 95, 476-485. https://doi.org/10.1016/j.conbuildmat.2015.07.161.
  40. Venkateswarlu, C. and Natarajan, C. (2015), "Performance assessment of RC beams with CFRP and GFRP sheets", Advances in Structural Engineering, Springer, New Delhi.
  41. Wan, B., Jiang, C. and Wu, Y. (2018), "Effect of defects in externally bonded FRP reinforced concrete", Constr. Build. Mater., 172, 63-76. https://doi.org/10.1016/j.conbuildmat.2018.03.217.
  42. Wang, X., Zhao, G., Li, K. and Li, M. (2018), "Effect of damage parameter variation on bond characteristics of CFRP-sheets bonded to concrete beams", Constr. Build. Mater., 185, 184-192. https://doi.org/10.1016/j.conbuildmat.2018.07.031.