DOI QR코드

DOI QR Code

Slotted hydrofoil design optimization to minimize cavitation in amphibious aircraft application: A numerical simulation approach

  • 투고 : 2019.04.16
  • 심사 : 2020.04.07
  • 발행 : 2020.07.25

초록

The proposed study aims to numerically investigate the performance of hydrofoils in the context of amphibious aircraft application. In particular, we also study the effectiveness of a slotted hydrofoil in minimizing the cavitation phenomenon, to improve the overall water take-off performance of an amphibious aircraft. We use the ICON A5 as a base model for this study. First, we propose an approach to estimate the required hydrofoil surface area and to select the most suitable airfoil shape that can minimize cavitation, thus improving the hydrodynamic efficiency. Once the hydrofoil is selected, we perform 2D numerical studies of the hydrodynamic and cavitating characteristics of a non-slotted hydrofoil on ANSYS Fluent. In this work, we also propose to use a slotted hydrofoil to be a passive method to control the cavitation performance through the boundary layer control. Numerical results of several slotted configurations demonstrate notable improvement on the cavitation performance. We then perform a multiobjective optimization with a response surface model to simultaneously minimize the cavitation and maximize the hydrodynamic efficiency of the hydrofoil. The optimization takes the slot geometry, including the slot angle and lengths, as the design variables. In addition, a global sensitivity study has been carried and it shows that the slot widths are the more dominant factors.

키워드

과제정보

The first author gratefully acknowledges the support of the Department of Mechanical and Aerospace Engineering at the Hong Kong University of Science and Technology (HKUST) for the financial and technical support for the use of the Tianhe-2 supercomputer in the National Supercomputer Center in Guangzhou for the optimization numerical simulations. The second author acknowledges the support from HKUST Start-Up Grant, Project No. R9354.

참고문헌

  1. ANSYS Fluent (2017), ANSYS Fluent Theory Guide, ANSYS Inc., Southpointe, Canonsburg, Pennsylvania, U.S.A.
  2. Belamadi, R., Abdelouaheb, D., Adrian, I. and Ramzi, M. (2016), "Aerodynamic performance analysis of slotted airfoils for application to wind turbine blades", J. Wind Eng. Industr. Aerodyn., 151, 79-99. https://doi.org/10.1016/j.jweia.2016.01.011.
  3. Bell, J.W. (1935), "The effect of depth of step on the water performance of a flying-boat hull model", Technical Report No. 535, National Advisory Committee for Aeronautics (NACA), Washington, U.S.A.
  4. Canamar, A. (2012), "Seaplane conceptual design and sizing", M.Sc. Thesis, University of Glasgow, Soctland, U.K.
  5. Chiandussi, G., Codegone, M., Ferrero, S. and Varesio, F.E. (2012), "Comparison of multi-objective optimization methodologies for engineering applications", Comput. Math. Appl., 63(5), 912-942. https://doi.org/10.1016/j.camwa.2011.11.057.
  6. Garg, N., Gaetan, K.K.W., Joaquim, R.R.A.M. and Yin L.Y. (2017), "High-fidelity multipoint hydrostructural optimization of a 3-D hydrofoil", J. Fluids Struct., 71, 15-39. https://doi.org/10.1016/j.jfluidstructs.2017.02.001.
  7. Gudmundsson, S. (2013), General Aviation Aircraft Design: Applied Methods and Procedures, Appendix C3: Design of Seaplanes, (1st Edition), Butterworth-Heinemann, U.S.A.
  8. Hicks, R.M., Murman, E.M. and Vanderplaats, G.N. (1974), "An assessment of airfoil design by numerical optimization", Technical Report NASA TM X-3092, California, U.S.A.
  9. Hilleman, T.B. (2005), "Apparatus and method for reducing hydrofoil cavitation", Patent number: US 2005/0076819 A1.
  10. Homa, D. (2014), "Comparison of different mathematical models of cavitation", Trans. VSB Tech. Univ. Ostrava Mech. Ser., 60(2).
  11. Homa, D. and Wroblewski, W. (2016), "Numerical research on unsteady cavitating flow over a hydrofoil", J. Phys. Conf. Ser., 760, 012006. https://doi.org/10.1088/1742-6596/760/1/012006
  12. Homa, D., Wroblewski, W., Majkut, M. and Strozik, M. (2018), "Experimental and numerical investigation of cavitation on Clark-Y foil", J. Phys. Conf. Ser., 1101, 012008. https://doi.org/10.1088/1742-6596/1101/1/012008
  13. Hong, F., Yuan, J. and Zhou, B. (2017), "Appplication of a new cavitation model for computations of unsteady turbulent cavitating flows around a hydrofoil", J. Mech. Sci. Technol., 31(1), 249-260. https://doi.org/10.1007/s12206-016-1227-x.
  14. Huang, B., Wang, G., Yu, Z. and Shi, S. (2012), "Detached-eddy simulation for time-dependent turbulent cavitating flows", Chin. J. Mech. Eng., 25(3), 484-490. https://doi.org/10.3901/CJME.2012.03.484.
  15. Huang, B., Young, Y.L., Wang, G. and Shyy, W. (2013), "Combined experimental and computational investigation of unsteady structure of sheet/cloud cavitation", J. Fluids Eng., 135(7), 071301. https://doi.org/10.1115/1.4023650.
  16. Iliev, S.P. (2017), "Aerofoil analysis using XFOIL - practical implementation for preliminary wing design", Imperial College London, U.K.
  17. Jameson, A. (1998), "Aerodynamic design via control theory", J. Sci. Comput., 3(3), 233-260. https://doi.org/10.1007/BF01061285.
  18. Jameson, A. (1990), "Automatic design of transonic airfoils to reduce the shock induced pressure drag", Proceedings of the 31st Israel Annual Conference on Aviation and Aeronautics, Haifa, Israel.
  19. Jin, R., Wei, C. and Agus S. (2005), "An efficient algorithm for constructing optimal design of computer experiments", J. Stat. Plan. Infer., 134, 268-287. https://doi.org/10.1115/DETC2003/DAC-48760.
  20. Khuri, A.I. and Mukhopadhyay, S. (2010), "Response surface methodology", Wiley Interdisciplin. Rev. Comput. Stat., 2, 128-149. https://doi.org/10.1002/wics.73.
  21. King, H.F. (1966), Aeromarine Origins: The Beginnings of Marine Aircraft, Winged Hulls, Air-Cushion and Air-Lubricated Craft, Planing Boats and Hydrofoils, (1st Edition), Aero-Publishers.
  22. Liu, Y., Wang, J. and Wan, D. (2019), "Numerical simulations of cavitation flows around Clark-Y hydrofoil", J. Appl. Math. Phys., 7, 1660-1676. https://doi.org/10.4236/jamp.2019.78113
  23. Mercier, J.A. (1969), Tests of a Variable Sweep Hydrofoil with Cavitation and Ventilation, Defense Technical Information Center, U.S.A.
  24. Mortezazadeh, M., Ali, K. and Khodayar J. (2014), "Cavitation control on hydrofoils", Proceedings of the International Conference on Heat Transfer and Fluid Flow, Prague, Czech Republic, August.
  25. Oller, S.A., Nallim, L.G. and Oller, S. (2016), "Usability of the Selig S1223 profile airfoil as a high lift hydrofoil for hydrokinetic application", J. Appl. Fluid Mech., 9(2), 537-542. https://doi.org/10.18869/acadpub.jafm.68.225.24302
  26. Petrie, D.M. (1966), "Operational and developmental experience on the U.S. navy hydrofoil high point", J. Aircraft, 3(1), 79-84. https://doi.org/10.2514/3.59269.
  27. Phoemsapthawee, S., Jean-Baptiste, L., Steven, K. and Jean-Marc, L. (2012), "Implementation of a transpiration velocity-based cavitation model within a RANSE solver", Eur. J. Mech. B/Fluids, 32, 45-51. https://doi.org/10.1016/j.euromechflu.2011.11.001.
  28. Puorger, P.C., Dessi, D. and Mastroddi, F. (2007), "Preliminary design of an amphibious aircraft by the multidisciplinary design optimization approach", Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, U.S.A.
  29. Qiu, L. and Song, W. (2016), "Efficient multiobjective optimization of amphibious aircraft fuselage steps with decoupled hydrodynamic and aerodynamic analysis models", J. Aerosp. Eng., 29(3), 04015071. https://doi.org/10.1061/(ASCE)AS.1943-5525.0000557.
  30. Qiu, L. and Song, W.B. (2013), "Efficient decoupled hydrodynamic and aerodynamic analysis of amphibious aircraft water takeoff process", J. Aircraft, 50(5), 1369-1379. https://doi.org/10.2514/1.C031846.
  31. Roohi, E., Amir, P.Z. and Mahmood P.F. (2013), "Numerical simulation of cavitation around a two-dimensional hydrofoil using VOF method and LES turbulence model", Appl. Math. Model., 37, 6469-6488. https://doi.org/10.1016/j.apm.2012.09.002.
  32. Rozhdestvensky, K.V. (2006), "Wing-in-ground effect vehicles", Progress Aerosp. Sci., 42(3), 211-283. https://doi.org/10.1016/j.paerosci.2006.10.001.
  33. Sarc, A., Stepisnik-Perdih T., Martin, P. and Matevz, D. (2017), "The issue of cavitation number value in studies of water treatment by hydrodynamic cavitation", Ultrasonics Sonochem., 34, 51-59. https://doi.org/10.1016/j.ultsonch.2016.05.020.
  34. Seol, H. (2013), "Time domain method for the prediction of pressure fluctuation induced by propeller sheet cavitation: numerical simulations and experimental validation", Ocean Eng., 72, 287-296. https://doi.org/10.1016/j.oceaneng.2013.06.030.
  35. Seth, A. and Liem, R.P. (2018), "Takeoff analysis on amphibious aircraft with implementation of a hydrofoil", Proceedings of the World Congress on Advance in Civil, Environmental, and Materials Research, Incheon, South Korea, August.
  36. Shen, Y.T. and Eppler, R. (1981), "Wing sections for hydrofoils, part 2 non-symmetrical profiles", J. Ship Res., 25, 191-200. https://doi.org/10.5957/jsr.1981.25.3.191
  37. Shoemaker, J.M. and Parkinson, J.B. (1933), "A complete tank test of a model of a flying-boat hull - N.A.C.A Model no. 11", Technical Report 464. National Advisory Committee for Aeronautics, Washington, U.S.A.
  38. Somers, D.M. (2012), "Design of a slotted, natural-laminar-flow airfoil for business-jet applications", Research Report NASA/CR-2012-217559, Langley Research Center, Pennsylvania, U.S.A.
  39. Thurston, D.B. (1995), Design for Flying, 2nd Edition, TAB Books.
  40. Thurston, D.B. and Vagianos, N.J. (1970), "Hydrofoil Seaplane Design" Unclassified Final Report no. 6912 for Naval Air Systems Command under contract N00019-69-0475, Sandford, Maine, U.K.
  41. Timoshevskiy, M.V., Ivan, I.Z., Konstantin, S.P. and Dmitriy, M.M. (2016), "Cavitating flow control through continuous tangential mass injection on a 2D hydrofoil at a small attack angle", Proceedings of the International Symposium and School of Young Scientists "Interfacial Phenomena and Heat Transfer", Russia, November.
  42. Wang, G., Inanc, S., Wei, S., Toshiaki, I. and Shuliang, C. (2001), "Dynamics of attached turbulent cavitating flows", Progress Aerosp. Sci., 37(6), 551-581. https://doi.org/10.1016/S0376-0421(01)00014-8.
  43. Wei, Q., Chen, H.X. and Rui, Z. (2015) "Numerical research on the performances of slot hydrofoil", J. Hydrodynam., 27(1), 105-111. https://doi.org/10.1016/S1001-6058(15)60462-0.
  44. Yakowitz, S.J. and Szidarovsky F. (1985), "A comparison of kriging with nonparametric regression methods", J. Multivariate Anal., 16(1), 21-53. https://doi.org/10.1016/0047-259x(85)90050-8
  45. Zhao, M. and Wan, D. (2018), "Numerical investigation of cloud cavitation flows around Clark-Y hydrofoil", Proceedings of the 3rd International Symposium of Cavitation and Multiphase Flow, Shanghai, China, April.

피인용 문헌

  1. Amphibious Aircraft Developments: Computational Studies of Hydrofoil Design for Improvements in Water-Takeoffs vol.8, pp.1, 2020, https://doi.org/10.3390/aerospace8010010