참고문헌
- Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater, 24(3), 299-307, 2008. https://doi.org/10.1016/j.dental.2007.05.007
- Ebeid K, Wille S, Hamdy A, Salah T, El-Etreby A, Kern M. Effect of changes in sintering parameters on monolithic translucent zirconia. Dent Mater, 30(12), e419-e424, 2014. https://doi.org/10.1016/j.dental.2014.09.003
- Hjerppe J, Vallittu PK, Froberg K, Lassila LV. Effect of sintering time on biaxial strength of zirconium dioxide. Dent Mater, 25(2), 166-171, 2009. https://doi.org/10.1016/j.dental.2008.05.011
- ISO-12836: 2012. Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy. Geneva: International Organization for Standardization. Accessed December 22, 2015.
- Jansen JU, Lumkemann N, Letz I, Pfefferle R, Sener B, Stawarczyk B. Impact of highspeed sintering on translucency, phase content, grain sizes, and flexural strength of 3Y-TZP and 4Y-TZP zirconia materials. J Prosthet Dent, 122(4), 396-403, 2019. https://doi.org/10.1016/j.prosdent.2019.02.005
- Jiang L, Liao Y, Li W. Effect of sintering temperature and particle size on the translucency of zirconium dioxide dental ceramic. J Mater Sci Mater Med, 22(11), 2429-2435, 2011. https://doi.org/10.1007/s10856-011-4438-9
- Jung HK, Kwak DJ. The study of flexural strength of full zirconia crown using block after clinical work. J Kor Aca Dent Tec, 33(4), 283-289, 2011.
- Kim KB, Kim JH, Lee KW. The influence of microwave sintering process on the adaptation of CAD/CAM zirconia core. J Dent Rehabil Appl Sci, 25(2), 95-107, 2009.
- Kim MJ, Ahn JS, Kim JH, Kim HY, Kim WC. Effects of the sintering conditions of dental zirconia ceramics on the grain size and translucency. J Adv Prosthodont, 5(2), 161-166, 2013. https://doi.org/10.4047/jap.2013.5.2.161
- Lawson S. Environmental degradation of zirconia ceramics. J Eur Ceram Soc, 15(6), 485-502, 1995. https://doi.org/10.1016/0955-2219(95)00035-S
- Marinis A, Aquilino SA, Lund PS, Gratton DG, Stanford CM, Diaz-Arnold AM, Qian F. Fracture toughness of yttria-stabilized zirconia sintered in conventional and microwave ovens. J Prosthet Dent, 109(3), 165-171, 2013. https://doi.org/10.1016/S0022-3913(13)60037-2
- Manicone PF, Iommetti PR, Raffaelli L. An overview of zirconia ceramics: Basic properties and clinical applications. J Dent, 35(11), 819-826, 2007. https://doi.org/10.1016/j.jdent.2007.07.008
- Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J, 28(1), 44-56, 2009. https://doi.org/10.4012/dmj.28.44
- Raptis NV, Michalakis KX, Hirayama H. Optical behavior of current ceramic systems. Int J Periodont Rest, 26(1), 31-41, 2006.
- Stawarczyk B, Ozcan M, Hallmann L, Ender A, Mehl A, Hammerlet CHF. The effect of zirconia sintering temperature on flexural strength, grain size, and contrast ratio. Clin Oral Invest, 17(1), 269-274, 2012. https://doi.org/10.1007/s00784-012-0692-6
- Sundh A, Sjogren G. A comparison of fracture strength of yttrium-oxide-partiallystabilized zirconia ceramic crowns with varying core thickness, shapes and veneer ceramics. J Oral Rehabil, 31(7), 682-688, 2004. https://doi.org/10.1111/j.1365-2842.2004.01284.x
- Tinschert J, Natt G, Mautsch W, Spickermann H, Anusavice KJ. Marginal fit of alumina and based fixed partial dentures produced by a CAD/CAM system. Oper Dent, 26(4), 367-374, 2001.
- Whalen PJ, Reidinger F, Antrim RF. Prevention of low - temperature surface transformation by surface recrystallization in yttria - doped tetragonal zirconia. J Am Ceram Soc, 72(2), 319-321, 1989. https://doi.org/10.1111/j.1151-2916.1989.tb06124.x
- Zarone F, Russo S, Sorrentino R. From porcelainfused-to-metal to zirconia: Clinical and experimental considerations. Dent Mater, 27(1), 83-96, 2011. https://doi.org/10.1016/j.dental.2010.10.024