DOI QR코드

DOI QR Code

Comparison of semi-active and passive tuned mass damper systems for vibration control of a wind turbine

  • Lalonde, Eric R. (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Dai, Kaoshan (Department of Civil Engineering, Sichuan University) ;
  • Bitsuamlak, Girma (Department of Civil and Environmental Engineering, University of Western Ontario) ;
  • Lu, Wensheng (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University) ;
  • Zhao, Zhi (State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University)
  • 투고 : 2019.11.21
  • 심사 : 2020.04.29
  • 발행 : 2020.06.25

초록

Robust semi-active vibration control of wind turbines using tuned mass dampers (TMDs) is a promising technique. This study investigates a 1.5 megawatt wind turbine controlled by eight different types of tuned mass damper systems of equal mass: a passive TMD, a semi-active varying-spring TMD, a semi-active varying-damper TMD, a semi-active varying-damper-and-spring TMD, as well as these four damper systems paired with an additional smaller passive TMD near the mid-point of the tower. The mechanism and controllers for each of these TMD systems are explained, such as employing magnetorheological dampers for the varying-damper TMD cases. The turbine is modelled as a lumped-mass 3D finite element model. The uncontrolled and controlled turbines are subjected to loading and operational cases including service wind loads on operational turbines, seismic loading with service wind on operational turbines, and high-intensity storm wind loads on parked turbines. The displacement and acceleration responses of the tower at the first and second mode shape maxima were used as the performance indicators. Ultimately, it was found that while all the semi-active TMD systems outperformed the passive systems, it was the semi-active varying-damper-and-spring system that was found to be the most effective overall - capable of controlling vibrations about as effectively with only half the mass as a passive TMD. It was also shown that by reducing the mass of the TMD and adding a second smaller TMD below, the vibrations near the mid-point could be greatly reduced at the cost of slightly increased vibrations at the tower top.

키워드

과제정보

The authors would like to acknowledge the support from the National Natural Science Foundation of China [grant numbers U1710111 & 51878426]; the International Collaboration Program of Sichuan Province [grant number 18GJHZ0111]; and the Fundamental Research Funds for Central Universities of China.

참고문헌

  1. Aboshosha, H., Bitsuamlak, G. and El Damatty, A. (2015a), "Turbulence characterization of downburst using LES", J. Wind Eng. Ind. Aerod., 136, 44-61. https://doi.org/10.1016/j.jweia.2014.10.020.
  2. Aboshosha, H., Elshaer, A., Bitsuamlak, G. and El Damatty, A. (2015b), "Consistent inflow turbulence generator for LES evaluation of wind-induced responses for tall buildings", J. Wind Eng. Ind. Aerod., 142, 198-216. https://doi.org/10.1016/j.jweia.2015.04.004.
  3. Ancheta, T.D., Darragh, R.B., Stewart, J.P., Seyhan, E., Silva, W.J., Chiou, B.S.J., Wooddell, K.E., Graves, R.W., Kottke, A., Boore, D.M., Kishida, T. and Donahue, J. (2013), "PEER NGA-West2 Database", Pacific Earthquake Engineering Research Center, Berkeley, U.S.A.
  4. Argyriadis, K. and Hille, N. (2004), "Determination of fatigue loading on a wind turbine with oil damping device", In the Proceedings of the 2004 European Wind Energy Conference & Exhibition, London.
  5. Arrigan, J., Pakrashi, V., Basu, B. and Nagarajaiah, S. (2011), "Control of flapwise vibrations in wind turbine blades using semi-active tuned mass dampers", J. Struct. Control Heal. Monit., 18(8), 840-851. https://doi.org/10.1002/stc.404.
  6. Asareh, M.A., Schonberg, W. and Volz, J. (2016), "Fragility analysis of a 5-MW NREL wind turbine considering aero-elastic and seismic interaction using finite element method", Finite Elemen. Analy. Des., 120(1), 57-67. https://doi.org/10.1016/j.finel.2016.06.006.
  7. Brodersen, M.L., Bjorke, A. and Hogsberg, J. (2017), "Active tuned mass damper for damping of offshore wind turbine vibrations", Wind Energy, 20(5), 783-796. https://doi.org/10.1002/we.2063.
  8. Brodersen, M.L., Ou, G., Hogsberg, J. and Dyke, S. (2016), "Analysis of hybrid viscous damper by real time hybrid simulations", Eng. Struct., 126, 675-688. https://doi.org/10.1016/j.engstruct.2016.08.020.
  9. Caterino, N. (2014), "Semi-active control of a wind turbine via magnetorheological dampers", J. Sound Vib., 345, 1-17. https://doi.org/10.1016/j.jsv.2015.01.022.
  10. Caterino, N., Georgakis, C.T., Spizzuoco, M. and Occhiuzzi, A. (2016), "Design and calibration of a semi-active control logic to mitigate structural vibrations in wind turbines", Smart Struct. Syst., 18(1), 75-92. https://doi.org/10.12989/sss.2016.18.1.075.
  11. Caterino, N., Georgakis, C.T., Trinchillo, F. and Occhiuzzi, A. (2014), "A semi-active control system for wind turbines", Wind Turbine Control Monit., 375-407. https://doi.org/10.1007/978-3-319-08413-8_13.
  12. Caterino, N., Spizzuoco, M. and Occhiuzzi, A. (2011), "Understanding and modelling the physical behaviour of magnetorheological dampers for seismic structural control", Smart Mat. Struct., 20(6). https://doi.org/10.1088/0964-1726/20/6/065013.
  13. Caterino, N., Spizzuoco, M., and Occhiuzzi, A. (2013), "Promptness and dissipative capacity of MR dampers: Experimental investigations", Structural Control and Health Monitoring, 20, 1424-1440. https://doi.org/10.1002/stc.1578.
  14. Chae, Y., Ricles, J.M. and Sause, R. (2012), "Modeling of a large-scale magneto-rheological damper for seismic hazard mitigation. Part 1: Passive mode", Earthq. Eng. Struct. Dyn., 42(5). https://doi.org/10.1002/eqe.2237.
  15. Chen, C., Ricles, J.M., Marullo, T.M. and Mercan, O. (2009), "Real-time hybrid testing using the unconditionally stable explicit CR integration algorithm", Earthq. Eng, Struct. Dyn., 38(1), 23-44. https://doi.org/10.1002/eqe.838.
  16. Chey, M., Chase, J.G., Mander, J.B. and Carr, A.J. (2009), "Semi-active tuned mass damper building systems: Design", Earthq. Eng. Struct. Dyn., 39(2), 119-139. https://doi.org/10.1002/eqe.934.
  17. Chou, J.S. and Tu, W.T. (2011), "Failure analysis and risk management of a collapsed large wind turbine tower", Eng. Fail. Analy, 8(1), 295-313. https://doi.org/10.1016/j.engfailanal.2010.09.008.
  18. Chung, L., Lai, Y., Yang, C.W., Lien, K. and Wu, L. (2013), "Semi-active tuned mass dampers with phase control", J. Sound Vib., 332(15), 3610-3625. https://doi.org/10.1016/j.jsv.2013.02.008.
  19. Connor, J.J. (2002), "Introduction to Structural Motion Control", Pearson.
  20. Dagnew, A.K. and Bitsuamlak, G. (2013), "Computational evaluation of wind loads on buildings: a review", Wind Struct., 16(6), 629-660. https://doi.org/10.12989/was.2013.16.6.629.
  21. Dai, K., Sheng, C., Zhao, Z., Yi, Z., Camara, A. and Bitsuamlak, G. (2017b), "Nonlinear response history analysis and collapse mode study of a wind turbine tower subjected to tropical cyclonic winds", Wind Struct., 25(1), 79-100. https://doi.org/10.12989/was.2017.25.1.079.
  22. Dai, K., Wang, Y., Huang, Y., Zhu, W. and Xu, Y. (2017a), "Development of a modified stochastic subspace identification method for rapid structural assessment of in-service utility-scale wind turbine towers", Wind Energy, 20(10), 1687-1710. https://doi.org/10.1002/we.2117.
  23. Dai, K., Yichao, H., Changqing, G., Zhenhua, H. and Xiaosong, R. (2015), "Rapid seismic analysis methodology for in-service wind turbine towers", Earthq. Eng. Eng. Vib., 14(3), 539-548. https://doi.org/10.1007/s11803-015-0043-0.
  24. Diaz, O. and Suarez, L.E. (2014), "Seismic analysis of wind turbines", Earthq. Spectra, 30(2), 743-765. https://doi.org/10.1193/123011EQS316M.
  25. Dinh, V., Basu, B. and Nagarajaiah, S. (2016), "Semi-active control of vibrations of spar type floating offshore wind turbines", Smart Struct., 18(4), 683-705. https://doi.org/10.12989/sss.2016.18.4.683.
  26. Eason, R.P., Sun, C., Dick, A.J. and Nagarajaiah, S. (2013), "Attenuation of a linear oscillator using a nonlinear and a semi-active tuned mass damper in series", J. Sound Vib., 332(1), 154-166. https://doi.org/10.1016/j.jsv.2012.07.048.
  27. Esteki, K., Bagchi, A. and Sedaghati, R. (2011), "Semi-active tuned mass damper for seismic applications", Smart Materials Structures & NDT in Aerospace Conference, Montreal, Canada, November.
  28. Gairola, A. and Bitsuamlak, G. (2019), "Numerical tornado modeling for common interpretation of experimental simulators", J. Wind Eng. Ind. Aerod., 186, 32-48. https://doi.org/10.1016/j.jweia.2018.12.013.
  29. Glauert, H. (1935), "Airplane Propellers", In Aerodynamic theory Springer, Berlin.
  30. Global Wind Energy Council (2017), "Global Wind Statistics 2017", Brussels, Belgium. http://gwec.net/wp-content/uploads/vip/GWEC_PRstats2017_EN-003_FINAL.pdf.
  31. Hartog, J.P.D. (1956), "Mechanical vibrations", McGraw-Hill.
  32. He, E., Hu, Y. and Zhang, Y. (2017), "Optimization design of tuned mass dampers for vibration suppression of a barge-type offshore floating wind turbine", J. Eng. Maritime Environ., 231(1), 302-315. https://doi.org/10.1177/1475090216642466.
  33. Hemmati, A. and Oterkus, E. (2018), "Semi-active structural control of offshore wind turbines considering damage development", Journal of Marine Science and Engineering, 6(3), 102. https://doi.org/10.3390/jmse6030102.
  34. Hrovat, D., Barak, P. and Rabins, M. (1983), "Semi-active versus passive or active tuned mass dampers for structural control", J. Eng. Mech., 109(3), 691-705. https://doi.org/10.1061/(ASCE)0733-9399(1983)109:3(691).
  35. Huang, C., Arrigan, J., Nagarajaiah, S. and Basu, B. (2010), "Semi-active algorithm for edgewise vibration control in floating wind turbine blades", In Earth and Space 2010: Engineering, Science, Construction, and Operations in Challenging Environments.
  36. Hussan, M., Rahman, M.S., Sharmin, F., Kim, D. and Do, J. (2018), "Multiple tuned mass damper for multi-mode vibration reduction of offshore wind turbine under seismic excitation", Ocean Eng., 160, 449-460. https://doi.org/10.1016/j.oceaneng.2018.04.041.
  37. Hussan, M., Sharmin, F. and Kim, D. (2017), "Multiple tuned mass damper based vibration mitigation of offshore wind turbine considering soil-structure interaction", Mech. Syst. Sig. Proc., 105, 338-360. https://doi.org/10.1016/j.ymssp.2017.12.011.
  38. International Electrotechnical Commission (2005), "IEC 61400-1 International Standard: Wind turbines 3rd ed.", Geneva, Switzerland.
  39. Jonkman, J. (2018), "FAST", National Renewable Energy Laboratory, Washington D.C. USA. https://nwtc.nrel.gov/FAST.
  40. Jonkman, J., Butterfield, S., Musial, W. and Scott, G. (2009). "NREL/TP-500-38060: Definition of a 5-MW Reference Wind Turbine for Offshore System Development", Golden, U.S.A.
  41. Katsanos, E., Thons, S. and Georgakis, C.T. (2016), "Wind turbines and seismic hazard: a state-of-the-art review", J. Wind Energy, 19(11), 2113-2133. https://doi.org/10.1002/we.1968.
  42. Kaveh, A., Pirgholizadeh, S. and Khademhosseini, O. (2015), "Semi-active tuned mass damper performance with optimized fuzzy controller using CSS algorithm", Asian J. Civil Eng., 16(5), 587-606.
  43. Kelly, N. and Jonkman, B. (2012), "TurbSim", National Renewable Energy Laboratory, Washington D.C. U.S.A.
  44. Lackner, M.A. and Rotea, M.A. (2010), "Passive structural control offshore wind turbines", J. Wind Energy, 14(3), 373-388. https://doi.org/10.1002/we.426.
  45. Lackner, M.A. and Rotea, M.A. (2011), "Structural control of floating wind turbines", J. Mechatronics, 21(4), 704-719. https://doi.org/10.1016/j.mechatronics.2010.11.007.
  46. Li, X., Ozdagli, A.I., Dyke, S.J., Liu, X. and Christenson, R. (2017), "Development and verification of distributed real-time hybrid simulation methods", J. Comput. Civil Eng., 31(4). https://doi.org/10.1061/(ASCE)CP.1943-5487.0000654.
  47. Mardfekri, M. and Gardoni, P. (2015), "Multi-hazard reliability assessment of offshore wind turbines", Wind Energy, 18(8), 1433-1450. https://doi.org/10.1002/we.1768.
  48. Martynowicz, P. (2015), "Vibration control of wind turbine tower-nacelle model with magnetorheological tuned vibration absorber", J. Vib. Control, 1-22. https://doi.org/10.1177/1077546315591445.
  49. Martynowicz, P. (2016), "Study of vibration control using laboratory test rig of wind turbine tower-nacelle system with MR damper based tuned vibration absorber", Bull. Polish Academy Sci., 64(2). https://doi.org/10.1515/bpasts-2016-0040.
  50. Martynowicz, P. (2017), "Control of a magnetorheological tuned vibration absorber for wind turbine application using the refined force tracking algorithm", J. Low Freq. Noise, Vib. Active Control, 36(4), 339-353. https://doi.org/10.1177/1461348417744299.
  51. Ministry of Housing and Urban-Rural Development of the People's Republic of China (2010), "Code for seismic design of buildings", Beijing, China.
  52. Mo, R., Kang, H., Li, M. and Zhao, X. (2017), "Seismic fragility analysis of monopile offshore wind turbines under different operational conditions", Energies, 10. https://doi.org/10.3390/en10071037.
  53. Murtagh, P.J., Ghosh, A., Basu, B. and Broderick, B.M. (2008), "Passive control of wind turbine vibrations including blade/tower interaction and rotationally sampled turbulence", Wind Energy, 11(4), 305-317. https://doi.org/10.1002/we.249.
  54. Nagarajaiah, S. (2009), "Adaptive passive, semiactive, smart tuned mass dampers: identification and control using empirical mode decomposition, Hilbert transform, and short-term fourier transform", J. Struct. Control Health Monit., 16(7), 800-841. https://doi.org/10.1002/stc.349.
  55. Nagarajaiah, S. and Sonmez, E. (2007), "Structures with semiactive variable stiffness single/multiple tuned mass dampers", J. Struct. Eng., 133(1), 67-77. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(67).
  56. Owji, H.R., Shirazi, A.H.N. and Sarvestani, H.H. (2011), "A comparison between a new semi-active tuned mass damper and an active tuned mass damper", Procedia Eng., 14, 2779-2787. https://doi.org/10.1016/j.proeng.2011.07.350.
  57. Park, S., Lackner, M.A., Cross-Whiter, J., Tsouroukdissian, A.R. and La Cava, W. (2016), "An investigation of passive and semi-active tuned mass dampers for a tension leg platform floating offshore wind turbine in ULS conditions", OMAE 2016 Proceedings, Busan, Korea, June.
  58. Park, S., Lackner, M.A., Pourazarm, P., Tsouroukdissian, A.R.n and Cross-Whiter, J. (2019), "An investigation on the impacts of passive and semiactive structural control on a fixed bottom and a floating offshore wind turbine", J. Wind Energy, 22, 1451-1471. https://doi.org/10.1002/we.2381.
  59. Pinkaew, T. and Fujino, Y. (2001), "Effectiveness of semi-active tuned mass dampers under harmonic excitation", Eng. Struct., 23(7), 850-856. https://doi.org/10.1016/S0141-0296(00)00091-2.
  60. Prowell, I., Veletzos, M., Elgamal, A. and Restrepo, J. (2009), "Experimental and numerical seismic response of a 65kW wind turbine", J. Earthq. Eng., 13(8), 1172-1190. https://doi.org/10.1080/13632460902898324.
  61. Rahman, M., Ong, Z.C., Chong, W.T., Julai, S. and Khoo, S.Y. (2015), "Performance enhancement of wind turbine systems with vibration control: A review", J. Renew. Sustain. Energy Rev., 51, 43-54. https://doi.org/10.1016/j.rser.2015.05.078.
  62. Reddy, J.N. (1993), "An introduction to the finite element method (2nd edition)", McGraw-Hill, Inc.
  63. Rezaee, M. and Aly, A.M. (2016), "Vibration control in wind turbines for performance enhancement: A comparative study", Wind Struct., 22(1), 107-131. https://doi.org/10.12989/was.2016.22.1.107.
  64. Ricciardelli, F., Occhiuzzi, A. and Clemente, P. (2000), "Semi-active tuned mass damper control strategy for wind excited structures", J. Wind Eng. Ind. Aerod., 88(1), 57-74. https://doi.org/10.1016/S0167-6105(00)00024-6.
  65. Sadowski, A.J., Camara, A., Malaga-Chuquitaype, C. and Dai K. (2017), "Seismic analysis of a tall metal wind turbine support tower with realistic geometric imperfections", Wind Structures, 46(2), 201-219. https://doi.org/10.1002/eqe.2785.
  66. Spencer, B., Finholt, T.A., Foster, I., Kesselman, C., Beldica, C., Futrelle, J., Gullapalli, S., Hubbard, P., Liming, L., Marcusiu, D., Pearlman, L., Severance, C. and Yang, G. (2004), "NEESgrid: A Distributed Collaborator for Advanced Earthquake Engineering Experiment and Simulation", The 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  67. Stewart, G.M. (2012), "Load reduction of floating wind turbines using tuned mass dampers", Master Dissertation, University of Massachusetts Amherst, Amherst, U.S.A.
  68. Sun, C. (2017), "Mitigation of offshore wind turbine responses under wind and wave loading: Considering soil effects and damage", Struct. Control Health Monit., 25(3). https://doi.org/10.1002/stc.2117.
  69. Sun, C. and Jahangiri, V. (2018), "Bi-directional vibration control of offshore wind turbines using a 3D pendulum tuned mass damper", Mech. Syst. Signal. Proc., 105, 338-360. https://doi.org/10.1016/j.ymssp.2017.12.011.
  70. Sun, C. and Nagarajaiah, S. (2013), "Study on semi-active tuned mass damper with variable damping and stiffness under seismic excitations", J. Struct. Control Health Monit., 21(6), 890-906. https://doi.org/10.1002/stc.1620.
  71. Sun, C., Nagarajaiah, S. and Dick, A.J. (2014), "Experimental investigation of vibration attenuation using nonlinear tuned mass damper and pendulum tuned mass damper in parallel", J. Nonlinear Dyn., 78(4), 2699-2715. https://doi.org/10.1007/s11071-014-1619-3.
  72. Talatahari, S., Kaveh, A. and Mohajer Rahbari, N. (2012), "Parameter identification of Bouc-Wen model for MR fluid dampers using adaptive charged system search optimization", J. Mech. Sci. Technol., 26(8), 2523-2534. https://doi.org/10.1007/s12206-012-0625-y.
  73. Tsouroukdissian, A.R., Park, S., Pourazarm, P., La Cava, W., Lackner, M., Lee, S. and Cross-Whiter, J. (2016), "Smart novel semi-active tuned mass damper for fixed-bottom and floating offshore wind", Offshore Technology Conference, Houston, U.S.A.
  74. Valamanesh, V. and Myers, A.T. (2014), "Aerodynamic damping and seismic response of horizontal axis wind turbine towers", J. Struct. Eng., 140. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001018.
  75. Veers, P.S. (1988), "Three-dimensional wind simulation", Sandia National Laboratories, Albuquerque, U.S.A.
  76. Wang, Z., Zhao, Y., Li, F. and Jiang, J. (2013), "Extreme dynamic responses of MW-level wind turbine tower in the strong typhoon considering wind-rain loads", Math. Probl. Eng., 2013. https://doi.org/10.1155/2013/512530.
  77. Yang, G., Spencer, B.F., Carlson, J.D. and Sain, M.K. (2002), "Large-scale MR fluid dampers: modeling and dynamic performance considerations", Eng. Struct., 24, 309-323. https://doi.org/10.1016/S0141-0296(01)00097-9.
  78. Zhang, R., Zhao, Z. and Dai, K. (2019), "Seismic response mitigation of a wind turbine tower using a tuned parallel inerter mass system", Eng. Struct., 180, 29-39. https://doi.org/10.1016/j.engstruct.2018.11.020.
  79. Zhao, Z., Dai, K., Camara, A., Bitsuamlak, G. and Sheng, C. (2019a), "Wind turbine tower failure modes under seismic and wind loads", J. Perform. Construct. Facil., 33(2). https://doi.org/10.1061/(ASCE)CF.1943-5509.0001279.
  80. Zhao, Z., Dai, K., Lalonde, E.R., Meng, J., Li, B., Ding, Z. and Bitsuamlak, G. (2019b), "Studies on application of scissor-jack braced viscous damper system in wind turbines under seismic and wind loads", Eng. Struct., 196. https://doi.org/10.1016/j.engstruct.2019.109294.
  81. Zuo, H., Bi, K. and Hao, H. (2017), "Using multiple tuned mass dampers to control offshore wind turbine vibrations under multiple hazards", Eng. Struct., 141(15), 303-315. https://doi.org/10.1016/j.engstruct.2017.03.006.

피인용 문헌

  1. Study on the damping mechanisms of a suspended particle damper attached to a wind turbine tower vol.33, pp.1, 2020, https://doi.org/10.12989/was.2021.33.1.103