The Journal of Advanced Prosthodontics

  • 제12권3호
  • /
  • Pages.114-123
  • /
  • 2020
  • /
  • 2005-7806(pISSN)
  • /
  • 2005-7814(eISSN)
대한치과보철학회 (The Korean Academy of Prosthodonitics)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of corrosion resistance of Co-Cr alloys fabricated with different metal laser sintering systems

  • Tuna, Suleyman Hakan (Department of Prosthodoitics, Faculty of Dentistry, Suleyman Demirel University) ;
  • Karaca, Erhan (Department of Chemistry, Faculty of Science, Hacettepe University) ;
  • Aslan, Ismail (Department of Prosthodontics, Faculty of Dentistry, Burdur Mehmet Akif Ersoy University) ;
  • Pekkan, Gurel (Department of Prosthodontics, Faculty of Dentistry, Tekirdag Namik Kemal University) ;
  • Pekmez, Nuran Ozcicek (Department of Chemistry, Faculty of Science, Hacettepe University)
  • 투고 : 2019.08.23
  • 심사 : 2020.04.29
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy powders. MATERIALS AND METHODS. The MLS machines and the alloy powders used were, ProX 100-ST2724G (St-Pro), Mysint 100-EOS SP2 (SP2-Mys), EOSINT 270-EOS SP2 (SP2-EOS), SLM 100-Starbond CoS (SB-SLM), and MLab Cusing-Remanium® Star (RS-MLab), respectively. Eight specimens from each group were prepared. Open circuit potential (Eocp) and electrochemical impedance spectroscopy (EIS) measurements of polished surfaces of the specimens were conducted in a three-electrode cell using a potentiostat-galvanostat in Fusayama-Meyer artificial saliva (AS). Specimens from each group were immersed in AS and de-ionized water for seven days. Eocp, charge transfer resistance (Rct) values, and released ions (㎍/㎠ × 7d) in different solutions were determined. The specimen surfaces were observed with SEM/EDS. Results were analyzed statistically. RESULTS. Eocp values have shifted to potentials that are more positive over time. Steady-state Eocp values were from high to low as follows, SB-SLM, SP2-Mys, SP2-EOS, RS-MLab, and ST-Pro, respectively. After 60 mins, RS-MLab specimens had the highest Rct value, followed by SP2-Mys, SB-SLM, SP2-EOS, and ST-Pro. In all groups, ion release was higher in AS than that in de-ionized water. CONCLUSION. There were small differences among the corrosion resistances of the Co-Cr alloy specimens produced with MLS systems; meanwhile, the corrosion resistances were quite high for all specimens.

키워드

참고문헌

  1. Tuna SH, Ozcicek Pekmez N, Kurkcuoglu I. Corrosion resistance assessment of Co-Cr alloy frameworks fabricated by CAD/CAM milling, laser sintering, and casting methods. J Prosthet Dent 2015;114:725-34. https://doi.org/10.1016/j.prosdent.2015.02.031
  2. Lu Y, Wu S, Gan Y, Li J, Zhao C, Zhuo D, Lin J. Investigation on the microstructure, mechanical property and corrosion behavior of the selective laser melted CoCrW alloy for dental application. Mater Sci Eng C Mater Biol Appl 2015;49:517-25. https://doi.org/10.1016/j.msec.2015.01.023
  3. Davis JR. ASM specialty handbook: Nickel, cobalt, and their alloys. ASM International; USA: 2000. p. 343-401.
  4. Simchi A. Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features. Mater Sci Eng A Struct Mater 2006;428:148-58. https://doi.org/10.1016/j.msea.2006.04.117
  5. Mumtaz KA, Erasenthiran P, Hopkinson N. High density selective laser melting of $Waspaloy^{(R)}$. J Mater Process Technol 2008;195:77-87. https://doi.org/10.1016/j.jmatprotec.2007.04.117
  6. Zhou Y, Li N, Yan J, Zeng Q. Comparative analysis of the microstructures and mechanical properties of Co-Cr dental alloys fabricated by different methods. J Prosthet Dent 2018;120:617-23. https://doi.org/10.1016/j.prosdent.2017.11.015
  7. Han X, Sawada T, Schille C, Schweizer E, Scheideler L, Geis-Gerstorfer J, Rupp F, Spintzyk S. Comparative analysis of mechanical properties and metal-ceramic bond strength of Co- Cr dental alloy fabricated by different manufacturing processes. Materials (Basel) 2018;11:1801. https://doi.org/10.3390/ma11101801
  8. Ucar Y, Akova T, Akyil MS, Brantley WA. Internal fit evaluation of crowns prepared using a new dental crown fabrication technique: laser-sintered Co-Cr crowns. J Prosthet Dent 2009;102:253-9. https://doi.org/10.1016/S0022-3913(09)60165-7
  9. Takaichi A, Suyalatu, Nakamoto T, Joko N, Nomura N, Tsutsumi Y, Migita S, Doi H, Kurosu S, Chiba A, Wakabayashi N, Igarashi Y, Hanawa T. Microstructures and mechanical properties of Co-29Cr-6Mo alloy fabricated by selective laser melting process for dental applications. J Mech Behav Biomed Mater 2013;21:67-76. https://doi.org/10.1016/j.jmbbm.2013.01.021
  10. Wang H, Feng Q, Li N, Xu S. Evaluation of metal-ceramic bond characteristics of three dental Co-Cr alloys prepared with different fabrication techniques. J Prosthet Dent 2016;116:916-23. https://doi.org/10.1016/j.prosdent.2016.06.002
  11. Qian B, Saeidi K, Kvetkova L, Lofaj F, Xiao C, Shen Z. Defects-tolerant Co-Cr-Mo dental alloys prepared by selective laser melting. Dent Mater 2015;31:1435-44. https://doi.org/10.1016/j.dental.2015.09.003
  12. Wataha JC. Alloys for prosthodontic restorations. J Prosthet Dent 2002;87:351-63. https://doi.org/10.1067/mpr.2002.123817
  13. Hedberg YS, Qian B, Shen Z, Virtanen S, Wallinder IO. In vitro biocompatibility of CoCrMo dental alloys fabricated by selective laser melting. Dent Mater 2014;30:525-34. https://doi.org/10.1016/j.dental.2014.02.008
  14. Hong MH, Min BK, Kwon TY. The influence of process parameters on the surface roughness of a 3D-printed Co-Cr dental alloy produced via selective laser melting. Appl Sci 2016;6:401. https://doi.org/10.3390/app6120401
  15. Galo R, Ribeiro RF, Rodrigues RC, Rocha LA, de Mattos Mda G. Effects of chemical composition on the corrosion of dental alloys. Braz Dent J 2012;23:141-8. https://doi.org/10.1590/S0103-64402012000200009
  16. Frankel GS. Electrochemical techniques in corrosion: status, limitations, and needs. J Test Eval 2008;42:517-38. https://doi.org/10.1520/JTE20140289
  17. Xin XZ, Chen J, Xiang N, Gong Y, Wei B. Surface characteristics and corrosion properties of selective laser melted Co-Cr dental alloy after porcelain firing. Dent Mater 2014;30:263-70. https://doi.org/10.1016/j.dental.2013.11.013
  18. McCabe JF, Walls AWG. Applied dental materials. 9th ed. Oxford: Blackwell Publishing Ltd.; UK: 2008. p. 4-84.
  19. Schmalz G, Garhammer P. Biological interactions of dental cast alloys with oral tissues. Dent Mater 2002;18:396-406. https://doi.org/10.1016/S0109-5641(01)00063-X
  20. Viennot S, Dalard F, Lissac M, Grosgogeat B. Corrosion resistance of cobalt-chromium and palladium-silver alloys used in fixed prosthetic restorations. Eur J Oral Sci 2005;113:90-5. https://doi.org/10.1111/j.1600-0722.2005.00190.x
  21. Shin JC, Doh JM, Yoon JK, Lee DY, Kim JS. Effect of molybdenum on the microstructure and wear resistance of cobalt- base Stellite hardfacing alloys. Surf Coat Technol 2003;166:117-26. https://doi.org/10.1016/S0257-8972(02)00853-8
  22. Matkovic T, Matkovic P, Malina J. Effects of Ni and Mo on the microstructure and some other properties of Co-Cr dental alloys. J Alloys Compd 2004;366:293-7. https://doi.org/10.1016/j.jallcom.2003.07.004
  23. Ren L, Memarzadeh K, Zhang S, Sun Z, Yang C, Ren G, Allaker RP, Yang K. A novel coping metal material CoCrCu alloy fabricated by selective laser melting with antimicrobial and antibiofilm properties. Mater Sci Eng C Mater Biol Appl 2016;67:461-7. https://doi.org/10.1016/j.msec.2016.05.069
  24. Siddharth R, Gautam R, Chand P, Agrawal KK, Singh RD, Singh BP. Quantitative analysis of leaching of different metals in human saliva from dental casting alloys: An in vivo study. J Indian Prosthodont Soc 2015;15:206-10. https://doi.org/10.4103/0972-4052.164906
  25. Bergman M. Corrosion in the oral cavity--potential local and systemic effects. Int Dent J 1986;36:41-4.
  26. Sahasrabudhe H, Bose S, Bandyopadhyay A. Laser processed calcium phosphate reinforced CoCrMo for load-bearing applications: Processing and wear induced damage evaluation. Acta Biomater 2018;66:118-28. https://doi.org/10.1016/j.actbio.2017.11.022
  27. Bandyopadhyay A, Shivaram A, Isik M, Avila JD, Dernell WS, Bose S. Additively manufactured calcium phosphate reinforced CoCrMo alloy: Bio-tribological and biocompatibility evaluation for load-bearing implants. Addit Manuf 2019;28:312-24.
  28. Hodgson AWE, Kurz S, Virtanen S, Fervel V, Olsson COA, Mischler S. Passive and transpassive behaviour of CoCrMo in simulated biological solutions. Electrochim Acta 2004;49:2167-78. https://doi.org/10.1016/j.electacta.2003.12.043
  29. Okazaki Y, Gotoh E. Comparison of metal release from various metallic biomaterials in vitro. Biomater 2005;26:11-21. https://doi.org/10.1016/j.biomaterials.2004.02.005
  30. Tuna SH, Pekmez NO, Keyf F, Canli F. The influence of the pure metal components of four different casting alloys on the electrochemical properties of the alloys. Dent Mater 2009;25:1096-103. https://doi.org/10.1016/j.dental.2009.02.013
  31. Lopez-Alias JF, Martinez-Gomis J, Anglada JM, Peraire M. Ion release from dental casting alloys as assessed by a continuous flow system: Nutritional and toxicological implications. Dent Mater 2006;22:832-7. https://doi.org/10.1016/j.dental.2005.11.011
  32. Wataha JC. Biocompatibility of dental casting alloys: a review. J Prosthet Dent 2000;83:223-34. https://doi.org/10.1016/S0022-3913(00)80016-5
  33. Valero Vidal C, Igual Munoz A. Study of the adsorption process of bovine serum albumin on passivated surfaces of CoCrMo biomedical alloy. Electrochim Acta 2010;55:8445-52. https://doi.org/10.1016/j.electacta.2010.07.028
  34. Liverani E, Fortunato A, Leardini A, Belvedere C, Siegler S, Ceschini L, Ascari A. Fabrication of Co-Cr-Mo endoprosthetic ankle devices by means of Selective Laser Melting (SLM). Mater Design 2016;106:60-8. https://doi.org/10.1016/j.matdes.2016.05.083
  35. Kettelarij JA, Liden C, Axen E, Julander A. Cobalt, nickel and chromium release from dental tools and alloys. Contact Dermatitis 2014;70:3-10. https://doi.org/10.1111/cod.12111
  36. Xin XZ, Xiang N, Chen J, Wei B. In vitro biocompatibility of Co-Cr alloy fabricated by selective laser melting or traditional casting techniques. Mater Lett 2012;88:101-3. https://doi.org/10.1016/j.matlet.2012.08.032
  37. Munoz AI, Mischler S. Effect of the environment on wear ranking and corrosion of biomedical CoCrMo alloys. J Mater Sci Mater Med 2011;22:437-50. https://doi.org/10.1007/s10856-010-4224-0
  38. Kurz W, Fisher DJ. Fundamentals of solidification. 3rd ed. Aedermannsdorf: Trans Tech Publications; Switzerland: 1989. p. 1-15.
  39. Kruth JP, Mercelis P, Van Vaerenbergh J, Froyen L, Rombouts M. Binding mechanisms in selective laser sintering and selective laser melting. Rapid Prototyp J 2005;11:26-36. https://doi.org/10.1108/13552540510573365
  40. Prashanth K, Scudino S, Klauss H, Surreddi KB, Lober L, Wang Z, Chaubey A, Kuhn U, Eckert J. Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment. Mater Sci Eng A 2014;590:153-60. https://doi.org/10.1016/j.msea.2013.10.023
  41. Standard specification for cobalt-28 chromium-6 molybdenum alloy castings and casting alloy for surgical implants. ASTM International; West Conshohocken, PA, USA: 2012. ASTM F75-12.
  42. Koutsoukis T, Zinelis S, Eliades G, Al-Wazzan K, Rifaiy MA, Al Jabbari YS. Selective laser melting technique of Co-Cr dental alloys: A review of structure and properties and comparative analysis with other available techniques. J Prosthodont 2015;24:303-12. https://doi.org/10.1111/jopr.12268
  43. Montero-Ocampo C, Juarez R, Rodriguez AS. Effect of fcchcp phase transformation produced by isothermal aging on the corrosion resistance of a Co-27Cr-5Mo-0.05C alloy. Metall Mater Trans A 2002;33:2229-35. https://doi.org/10.1007/s11661-002-0054-0

피인용 문헌

  1. Cobalt-Chromium Dental Alloys: Metal Exposures, Toxicological Risks, CMR Classification, and EU Regulatory Framework vol.10, pp.12, 2020, https://doi.org/10.3390/cryst10121151