Elastomers and Composites

  • 제55권2호
  • /
  • Pages.114-119
  • /
  • 2020
  • /
  • 2092-9676(pISSN)
  • /
  • 2288-7725(eISSN)
한국고무학회 (The Rubber Society of Korea)
권호 표지
DOI QR코드

DOI QR Code

Effect of Polycarbonate Covering Sheet on Greenhouse Indoor Environments and Growth Behavior of Cherry Tomatoes

  • Choi, Kyung Yun (Technical Research Center, Taekwang Newtec) ;
  • Kim, Soo Bok (Chungju Agricultural Technology Center) ;
  • Bae, Seokhu (Advanced Materials R&D Center, Korea Automotive Technology Institute) ;
  • Yoon, Jeong-Hwan (Advanced Materials R&D Center, Korea Automotive Technology Institute) ;
  • Yun, Ju-Ho (Advanced Materials R&D Center, Korea Automotive Technology Institute) ;
  • Kim, Namil (Technical Research Center, Taekwang Newtec)
  • 투고 : 2020.04.27
  • 심사 : 2020.05.22
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The effect of a greenhouse-covering material on its indoor environment and on the characteristics of cherry tomatoes grown in it was investigated. The conventional polyethylene (PE) film on the greenhouse roof was replaced by a polycarbonate (PC) sheet, while maintaining the main structural frame intact. Color changes and the formation of water droplets on the PC surface were avoided by applying coextrusion and coating layers. When compared to the PE greenhouse, the PC greenhouse enabled increased light transmittance and thus a higher indoor temperature during both summer and winter. The thermal insulating property of the PC sheet effectively reduced the heating loss by approximately 55% during winter. The cherry tomatoes grown in the PC greenhouse exhibited superior fruit characteristics in terms of size, weight, and sugar content. The total amount of cherry tomatoes produced per unit area (1,000 ㎡) in the PC greenhouse was found to be greater by approximately 19% compared to that in the PE greenhouse.

키워드

참고문헌

  1. H. B. Lee and K. S. Kang, "Characteristics and development direction of covering materials in protected horticulture", Protected Hort. Plant Fac., 9, 53 (1996).
  2. P. A. Dilara and D. Briassoulis, "Degradation and stabilization of low-density polyethylene films used as greenhouse covering materials", J. Agric. Engng Res., 76, 309 (2000). https://doi.org/10.1006/jaer.1999.0513
  3. E. Schettini, L. Stefani, and G. Vox, "Interaction between agrochemical contaminants and UV stabilizers for greenhouse EVA plastic films", Appl. Eng. Agric., 30, 229 (2014).
  4. A. P. Papadopoulos and X. Hao, "Effects of three greenhouse cover materials on tomato growth, productivity, and energy use", Sci. Hortic-Amsterdam, 70, 165 (1997). https://doi.org/10.1016/S0304-4238(97)00054-X
  5. G. A. Giacomelli and W. J. Roberts, "Greenhouse Covering Systems", HortTechnology, 3, 50 (1993). https://doi.org/10.21273/HORTTECH.3.1.50
  6. J. K. Kwon, Y. H. Choi, D. K. Park, J. H. Lee, Y. C. Um, and J. C. Park, "Optical and physical properties of covering materials for plastic greenhouse", J. Bio-Environ. Control, 10, 141 (2001).
  7. S. Janjai, P. Intawee, J. Kaewkiew, C. Sritus, and V. Khamvongsa, "Large-scale solar greenhouse dryer using polycarbonate cover: Modeling and testing in a tropical environment of Lao People's Democratic Republic", Renew. Energy, 36, 1053 (2011). https://doi.org/10.1016/j.renene.2010.09.008
  8. J. K. Kwon, B. Khoshimkhujaev, J. H. Lee, I. H. Yu, K. S. Park, and H. G. Choi, "Growth and yield of tomato and cucumber plants in polycarbonate or glass greenhouses", Hortic. Sci. Technol., 35, 79 (2017). https://doi.org/10.7235/HORT.20170009
  9. H. W. Lee, S. Diop, and Y. S. Kim, "Variation of the overall heat transfer coefficient of plastic greenhouse covering material", J. Bio-Environ. Control, 20, 72 (2011).
  10. J. B. Park and H. K. Koh, "Analysis of solar radiation and simulation of thermal environment in plastic greenhouse", Sol. Energy, 6, 22 (1986).
  11. M. Diepens and P. Gijsman, "Influence of Light Intensity on the Photodegradation of bisphenol A polycarbonate", Polym. Degrad. Stabil., 94, 34 (2009). https://doi.org/10.1016/j.polymdegradstab.2008.10.003
  12. A. Rivaton, B. Mailhot, J. Soulestin, H. Varghese, and J. L. Gardette, "Comparison of the photochemical and thermal degradation of bisphenol-A polycarbonate and trimethylcyclohexane-polycarbonate", Polym. Degrad. Stabil., 75, 17 (2002). https://doi.org/10.1016/S0141-3910(01)00201-4
  13. A. Blaga and R. S. Yamasaki, "Surface microcracking induced by weathering of polycarbonate sheet", J. Mater. Sci., 11, 1513 (1976). https://doi.org/10.1007/BF00540886
  14. B. N. Jang and C. A. Wilkie, "The Thermal Degradation of Bisphenol A Polycarbonate in Air", Thermochim. Acta, 426, 73 (2005). https://doi.org/10.1016/j.tca.2004.07.023
  15. J. H. Kim, B. O. Jang, Y. K. Park, and B. H. Lim, KR patent 10-1614855 (2016).
  16. N. I. Kim, Y. S. Yoon, M. H. Oh, A. Y. Kim, D. J. Moon, and W. B. Jo, KR patent 10-1650450 (2016).